Steering wheel shakes when in idle speed in gear and is s...
Responses
Nachum Wagschal
258 days ago
Good Morning .
Is this like a miss or just a vibration ?
The [carburetor](/topics-carburetor/) mixture may need to be adjusted .
I would also make sure there is nothing hitting the body like the [exhaust](/topics-exhaust-ford/) .
Customer
258 days ago
cancel conversationcancel contact
Nachum Wagschal
258 days ago
I don't have that access , you will have to contact customer support
[https://www.justanswer.com/help/contact-us](//www.justanswer.com/help/contact-us)
here is the contact information for customer support .
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do you work the manual rearview mirror?
Your car’s rearview mirror provides essential visibility out of the back window. However, you will need to adjust it periodically, as well as after anyone else has driven the car. Here’s what you need to do: Grasp the mirror by...
Car shutting off even with a new fuel pump.
In my experience I would recheck the fuel pump again since if it fixed the problem only a short period of time, then the new part may be defective. The fuel pressure test would let you know if it is...
What other issues could I check, if I changed my coolant temperature sensor and my vehicle is still jumping or missing?
You need to fix that air leak. The best thing to do is buy a new intake boot. If you're short on funds, you can use duct tape or some other strong tape to cover the hole in lieu of...
Car idles rough, extremely weak and stalls when put into gear
Hello. This can be caused by a number of things. I usually start by scanning the computer for codes. This will let me know if the computer is seeing any issues. If there are no codes then I take a...
No crank and no start
Hi and thanks for your question. Remove a spark plug wire from one of the spark plugs, and put a screwdriver in the wire and put it to ground. Now, try starting the vehicle. If there is no spark, then...
Reading 9 different codes
Hello, and thank you for writing in. With a misfire detected on all cylinders, you need to direct your attention to a component that can cause the entire engine to struggle. Considering you have an EVAP code as well, and...
How many crankshaft position sensor are there? 2002 Infiniti QX4
Hello - there is only 1 crankshaft position sensor on this engine. It is located on top of the transmission bellhousing at the rear of the engine (driver side). For assistance, I recommend a crankshaft position sensor replacement (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) performed...
I have a 2007 BMW 328XI and noticed that I was experiencing a load grinding noise when reversing and occasionally when turning. I
Hello, thank you for writing in. Without inspecting the vehicle, there is no way of knowing how badly the vehicle is damaged, nor how extensive the damage is. With that being said, the steering linkage and suspension are both susceptible...
My car won't turn on
The first thing to try is to put in new batteries in the key FOB and see if this helps. If it does then replace batteries in all extra keys also. If it still has issues then you may have...
Browse other content
Cities
Services
Estimates
Steering wheel shakes when in idle speed in gear and is smooth driving 74 f100 Mechanic's Assistant: How often does the vibration occur, and when did you last have the tires balanced? Only in gear at idle speed Mechan...
Steering wheel shakes when in idle speed in gear and is smooth driving 74 f100 Mechanic's Assistant: How often does the vibration occur, and when did you last have the tires balanced? Only in gear at idle speed Mechanic's Assistant: What is the make/model/year of your car? 74 f100\*\*\*\*\* Mechanic's Assistant: Are you fixing your vehicle yourself? What have you tried so far? Changed motor and transmissin mounts