P0301 p0302 p0304 p0c2a
Responses
john -aka eauto
280 days ago
Hello, Welcome to Just Answer. My name is\*\*\*\*\* would be delighted to assist you today.
I'm sorry you're having trouble with your vehicle today.
The website will offer you a phone call. Feel free to accept or decline this service.
It does not come directly from me. I cannot provide phone assistance outside the US.
Please give me a few moments to go over your concerns.
While I'm reviewing your case, would you mind sending me your VIN? This will allow me to give you the most accurate
information possible based on your specific vehicle. Please know this is not an auto response message system. We are
full time Automotive technicians, who field cases as they come in. If you do not receive a prompt response, this means we have stepped away momentarily
or are working on your case as well as many others. Please be patient as we work through this. May I ask your name?
Customer
280 days ago
Collette. And understood.2016 Ford fusion hybrid
P0301 p0302 p0304 p0c2a.
Plugs misfire and some kind of fuel accelerate misfunction.
john -aka eauto
280 days ago
Have you changed the coils on 1 2 and 4 yet? That would be the starting point
Customer
280 days ago
No, only because the oil smells more like fuel than motor oil
john -aka eauto
280 days ago
well when it missfires that bad that will happen after the miss fire is solved the oil will need changing
Customer
280 days ago
try changing plugs and oil?
john -aka eauto
280 days ago
plugs [ignition coils](/topics-ignition-coil-ford/) and oil and filter yes
Customer
280 days ago
OkI will try that and let you know how it went.Question do I reset the code after the change?
john -aka eauto
280 days ago
Yes
Customer
280 days ago
ThanksI'll let you know how it goes.
Customer
280 days ago
Coils are expensive what happens if its not the problem?
john -aka eauto
280 days ago
they run 10 to 30 bucks on rockauto.com depending on brand.. thats kinda cheap?
Customer
280 days ago
True. I was looking on autozone
john -aka eauto
280 days ago
yea online saves a ton of money Honestly tho i would not get the cheapest ones mid grade or premium if it was me
Customer
280 days ago
it is still doing same thing
john -aka eauto
280 days ago
You did the coils and plugs?
Customer
280 days ago
Oil nd filterAs wellIt starts than starts choking
john -aka eauto
280 days ago
is it missfiring or choking? did the prior missfire melt down the catylitic converter?
Customer
280 days ago
How do I check that
Customer
280 days ago
it saying p0301 again thats misfire
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Bad noise coming from transmission.
Depending on whether you have a manual or an automatic transmission will determine what the issue is. Also, a description of the noise would help. Most of the time if you have an issue with the manual transmission that causes...
Torque converter clutch solenoid stuck on
Hi there. This is a very common problem on your car. The solenoid gets stuck, making it just about impossible to drive the vehicle. The torque converter clutch is made to only be turned on at higher speeds and causes...
The car suddenly couldn't start, it cranks well
When a fuel pump fails, it is known to happen randomly and can give the same symptoms you are describing. My first recommendation would be to have your fuel pressure checked by a certified professional to determine whether or not...
Traction system
It sounds like you may have a faulty wheel speed sensor (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement). The ABS system uses information from your wheel speed sensors to detect if each wheel is rotating at the same speed. If you have different sized tires, a...
How to replace spark plugs in Nissan 2010 titan
Hello...to service spark plugs on your vehicle, you must disconnect the negative battery cable. Inasmuch as the vehicle's Idle Air Volume Learning, Steering Angle Sensor Neutral Position, Sunroof Memory Reset/Initialization, Automatic Drive Positioner System, Audio presets and Navigation settings will...
The truck has problems shifting
Hello, thanks for writing in about your Ford F-100. Depending on the engine you have and if you have a manual transmission then you may have broken motor (https://www.yourmechanic.com/services/engine-mount-replacement) and transmission mounts that will cause the clutch linkage and shifter...
When my car is at idle in park or neutral the Intake Air Control Valve fluctuates, causing the RPM's to do the same.
Hi there. It sounds as though the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) (IAC) may be sticking. It is not uncommon for carbon to build up in the valve, the computer will try to overcompensate to correct the slow reaction inside...
Trying to diagnose a po405 Low Signal circuit voltage to egr. Everything working fine but code will not go away??
Hi there. P0405 is an OBD-II generic code (https://www.yourmechanic.com/article/p0405-obd-ii-trouble-code-exhaust-gas-recirculation-sensor-circuit-a-low-by-jay-safford) that the engine control module (ECM) detected the engine exhaust gas recirculation (EGR) sensor has went below its specification range. A short to ground of the sensor input to the ECM....
my 1989 corvette anti lock light comes on the car will start then dies
Hi Kristine. Thanks for reaching out to us today. If you're referring to the anti-lock brake light on your Corvette, this typically does not impact the operation of the engine or would cause it to start then shut off. However,...
Browse other content
Services
Maintenance
P0301 p0302 p0304 p0c2a Mechanic's Assistant: What is the make/model/year of your car? Those are the codes 2016 Ford fusion hybrid Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried t...
P0301 p0302 p0304 p0c2a Mechanic's Assistant: What is the make/model/year of your car? Those are the codes 2016 Ford fusion hybrid Mechanic's Assistant: Just to clarify, what's the exact code? And have you tried to reset it? Those codes p301 p0302 p0304 is misfire p0c2a is something else My car is trippin out cant reset need to fix car. Mechanic's Assistant: Are you fixing your Fusion Hybrid yourself? What have you tried so far? Haven't tried anything just used my diagnostic tool at home Need a mechanic Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? No I don't think so. Well it started shaking on me felt like car was choking. That's about it used tow truck to get it home