Having a problem with it breaking up under load


Having a problem with it breaking up under load Mechanic's Assistant: What is the make/model/year of your car? 95 mustang gt 5.0 [engine](/topics-engine-ford/) Mechanic's Assistant: How many miles are on the Shelb...

Having a problem with it breaking up under load Mechanic's Assistant: What is the make/model/year of your car? 95 mustang gt 5.0 [engine](/topics-engine-ford/) Mechanic's Assistant: How many miles are on the Shelby? Is it an automatic or a manual [transmission](/topics-transmission-ford/)? Manual Mechanic's Assistant: What year is your Mustang GT? 95 Mechanic's Assistant: Are you fixing your Mustang GT yourself? What have you tried so far? Changed the MAF sensor Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Just bought it so any info can help

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. Give me one moment while I review your question and I will be right back with your answer, or I may need some additional information from you about your vehicle. The site will ask for a phone call not me so please disregard that thanks!

Ok
Automotive Expert
Is the engine light on? When was the last tune up and how many miles on the vehicle?

The check engine light is on. I changed the MAF sensor about 10-15 mins ago and it popped back on soon as I gave it a couple revs. The odometer is showing 146,000 but it was broken when I got it so could be well over that. I'm sure it needs a tune up but pulls strong then starts to sputter at about 3500 to 4grand. If I cruise it's not bad but noticeable at the least
Automotive Expert
Ok what was the number of the code stored ? Feels like its losing spark or fuel to you ?

Something like that. I didn't get a chance to check the code because it's saying it's not connecting to the computer which worry's me a little cuz it may be the computer itself
Automotive Expert
If it is saying no communication with the scanner that is not good as yes you are right the PCM can very well be the issue . I would check that for any signs of water or corrosion but it still can be shorted internally. In the meantime you can do a complete tune up as well as cleaning out the throttle body and see if that makes any difference if not they you need to focus on the PCM and fuel pressure. If you need more help please use the reply tab to continue our conversation. I am here to help you in anyway I possibly can. Please Stay Safe ! It was my pleasure helping you today .

If I did get another pcm would I need to get it flashed or is it just plug and play. I'm not exactly sure if the car has a anti theft system which I'm sure it does?
Automotive Expert
If it has the anti theft it will need to be programmed but you can try and if it does not start swap the old back.

Ok thanks I'll let you know if I need anything else
Automotive Expert
Its my Pleasure! I'm here if you need me.

Hey Tom. I ordered the ecm came in today. Changed [spark plugs](/topics-spark-plug-ford/)(oddly about 6 out of 8 was hand tight)wires, [ignition coil](/topics-ignition-coil-ford/), cap and rotor button but may be taken it back cuz it's making a ticking sound as if it's hitting something while it spins. Put everything in and it drives flawlessly.......until I plug the MAF sensor in. ‍♂️‍♂️‍♂️‍♂️
Automotive Expert
Ok did you use a factory maf sensor?
Automotive Expert
Any chance there is damage to that Maf harness?

That's what I'm wondering maybe it's some not able to see with the naked eye.I did see a bit of a crack in the air box but that wouldn't throw it off that bad would it
Automotive Expert
It very well can as you know these Mafs are super sensitive

When I plug it in and put it under load it loses all power till I get off the gas and it seems as if it starts right back up. If I unplug it completely it runs like nothing is wrong with it at all
Automotive Expert
Have you checked the TPS

It's new
Automotive Expert
Ok throttle body as wlltWell

It appeared to be clean. Butterfly wasn't caked up with carbon. But isn't there a passage way in there some where
Automotive Expert
can be get pets clogged. I have to log off for awhile. I will post anything else to check.

Ok
Automotive Expert
Sorry need to check the egr valve as well as the ports to see if there clogged as well.

Well while you were away I made a discovery. Moved the wires inside the air box leading to the MAF sensor and the idle changed. Believe a short in the wires
Automotive Expert
Ok absolutely that’s the issue. It’s in that harness or the pins in the connector thought that might be the issue. Just remember if you have to repair the harness disconnect the battery so no other issues occur.

Think I'd have to buy one second hand since they don't sell the whole one new.
Automotive Expert
unfortunately just glad you found the issue.

Exactly. Just hope I don't run into the same problem
Automotive Expert
Think you will be fine just take your time.

Ok thanks for everything
Automotive Expert
My Pleasure

What others are asking

How do I adjust the electronic range select (ERS) system?
The electronic range select (ERS) system limits the highest gear that your vehicle can be using. When in ERS mode, tap the shift lever right, towards the +, to add an extra gear to the ERS. Tap the lever left,...
Hood won't open in 2007 Chevrolet Aveo
Hi there. Most of the time when the hood will no longer release on the Aveo. This is because the release cable has broken from the release handle under the dash. You can typically pull the handle and visually see...
EPC light on
Hi there. The EPC light will come on when there is a malfunction with your engine being sensed. Your vehicle will automatically limit the amount of throttle usage to help prevent further damage to your engine. This feature is designed...
Battery light is still on after getting a new battery and alternator
The Honda Element has a computer-controlled charging system to help improve fuel economy. In the engine compartment fusebox there is an ELD unit that monitors electrical loads of the vehicle consumers and will communicate with the engine computer to turn...
I have a convertible an I try to put the soft top down and it keeps saying manual only when it's a automatic
Hello there. When you see the manual only warning, this is telling you that the convertible top has experienced a malfunction and it will only work manually. Even though your car has a hydraulic top, it can still be opened...
my truck has a whine on acceleration around 1700 rpm, what is it?
The noise is most likely coming from a bearing in the transmission. The noise is created when you put pressure on it under acceleration. I would need to hear the noise to be sure but this is common on this...
My 2016 Toyota Camry had a stagnant water smell coming through the air vents. I asked the service center Not to use any fragrances
This is something I always do in place of perfumed disinfectants. My other half is also sensitive to perfumed sprays. I use a name brand household spray disinfectant. They are available in different scents that you may be less sensitive...
Runs fine but doesn’t accelerate after I step on the break
Hi Dagoberto. Thanks for contacting us tonight. Sometimes issues like you've described are caused by a worn out torque converter, while in some instances, it's as simple as dirty transmission fluid or an inner seal leak. It can also be...
Hard steering while driving
If you are losing engine RPM, that itself will cause loss of steering assist, but in that scenario the engine has a stalling, or loss of power, problem. The potential causes in that scenario are quite varied and numerous. If...