I have a 2005 ford five hundred limited. I hit a pothole ...


I have a 2005 ford five hundred limited. I hit a pothole and the [engine](/topics-engine-ford/) shut off I was able to start it up and drive it but eventually it would shut off again at one point it displayed "engine fail safe mod...

I have a 2005 ford five hundred limited. I hit a pothole and the [engine](/topics-engine-ford/) shut off I was able to start it up and drive it but eventually it would shut off again at one point it displayed "engine fail safe mode" once then it never came back on. Mechanic's Assistant: Will the [headlights](/topics-headlight-ford/) turn on? Is the battery fully charged? Yes Mechanic's Assistant: Are you fixing your Ford Five Hundred yourself? What have you tried so far? I haven't tried anything Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Thats all

Automotive Expert
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you.. I help many customers, so sometimes my replies are delayed, I will respond once available. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call. This light will come on when the computer sees a problem that affects the performance of the engine or [transmission](/topics-transmission-ford/). There are many problems that can fail that will trigger this. It could be a faulty sensor, wiring issue, module fault, engine malfunction, etc. To see what specifically is causing the light to come on the vehicle will need to be tested with a scan tool that connects to the vehicle. This test will provide a trouble code that describes what specific system is having the problem. If you can have the vehicle scanned and can give me the code, I will be able to tell you specifically what is wrong with it. If you do not have a scan tool then you can bring your vehicle to any auto part store and they will scan it for free and give you the trouble code. I would do this ASAP so that we can determine what the problem is and keep any other problems from happening.

What others are asking

What does the Rear Access Open message mean?
The Rear Access Open message will appear on your driver information center (DIC) when the trunk is not properly closed. After you close the trunk, the alert will go away.
Opinion about Honda Civic CVT
Honda Civics are really good cars, but I am not a fan of those CVT transmissions, because you don’t get power out of them. You say that it is a lease car, so if the thing breaks with 100,000 miles...
EVAP Small Leak Code P0442 Lit MIL. Code cleared, has not reappeared. But, Diagnostic tool still shows Emission Related DTC's
In order for all the monitors to clear you will have to do a lot of driving to see if it clears. The last two to clear take highway driving at a steady speed to clear and may take a...
Car shuts off while driving
This sounds like potentially a mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) problem. The mass air flow sensor monitors the air flow into the engine and when this is faulty can cause reactions much like what you are describing. I would suggest...
Got an oil change at Walmart, now car won't moves and stalls after stalling.
Hello and thank you for contacting Your Mechanic. What seems to happen is the technician from Wal-Mart did not put any oil in the engine. This is common occurrence with Wal-Mart. When you pulled the dipstick and there was no...
Ugly noise coming from the engine when I hit the gas pedal. Oil Light comes on when I brake harshly
The first thing to check would be the engine oil level. The red oil can light is a warning light for low oil pressure and this can happen if there is an internal failure or if the oil level is...
Reputable aftermarket A/C compressor brands
Hey there. The first thing you need to determine is if it is the clutch that is making the noise or the compressor. If the compressor is noisy internally, replacing the clutch won't fix your problem. There are many aftermarket...
My car is misfireing
Hi Rufus. Thanks for contacting us today. Of the three codes you've provided us tonight, the one that I would place most of my focus would be the crankshaft position sensor. In some cases, when the electrical harness of this...
Code p0301 replaces all 4 plugs, cylinder 1 and head gasket
Diagnostic Trouble Code P0301 (https://www.yourmechanic.com/article/p0301-obd-ii-trouble-code-cylinder-1-misfire-detected-by-jamahl-walker) means that Cylinder No. 1 is misfiring but the causes of that misfiring can be very varied. The fuel injector could simply be dead or there is little cylinder compression due to a burned valve...