So I have a 1995 Dodge [Ram 2500](/topics-ram-2500/)

Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. Give me one moment while I review your question and I will be right back with your answer, or I may need some additional information from you about your vehicle. The site will ask for a phone call not me so please disregard thanks. Was there any recent work done prior to this issue? IS the check engine light on? Its fine in any other forward gear correct?

No check Engine lightAll the gears work goodOnly when I put in to reverse the car shut off

Was any work done. Sounds like the torque converter is locking up in reverse causing the vehicle to stall. When was this transmission serviced last?

It only has 60k miles

It goes by years the fluid not just miles .

1995 Dodge Ram pretty old

Yes sir,. It can be a pressure issue as well. Try leaving it in neutral for 5 minutes then go to reverse see if it stalls . If it does not then you need to have that fluid changed and flushed of all debris as well as the filter replaced. If it does it can be internal in the transmission. If you need more help please use the reply tab to continue our conversation. If no further assistance is needed, please consider rating me as 5 STAR!! It is much appreciated. You can rate at any time and we can continue to work on your question as this will not close out your question. Stay Safe !!! Bonuses greatly appreciated.

Ok the other question that I have it's about the oil pressureIt just go up and down

Ok that can be a faulty oil pressure switch common or there is a actual clog on the oil pick up in the engine they do get clogged.

how can I fix that

Start by checking the oil pressure switch and if there is sludge in the engine or the oil is super dark then you need to check that oil pick up.

I change the oil and filter 5 months agoWhen is the oil pressure switch located

5.9 engine?

This video will help. [1995 Dodge Ram 1500 5.9L oil sending switch](https://www.youtube.com/watch?v=nEKwTKsJHUo)

Ok thanks

My Pleasure ! Stay Safe!

It doesn't let see the video

Did you click the blue writing

I didn't got any blue writing

https://youtu.be/nEKwTKsJHUo Try that

How do I fix the torque converter

That a transmission shop would need to do and remove the transmission and see what failed. Then they would need to rebuild it to fix the issue.

What is the transmission oil pan nut

What are you trying to do drain the fluid ?

Ok Let me see what I can post for you

I think it has 17 bolts

https://youtu.be/t5j47YYhn6c That video will help.

Doesn't say anything about what I'm asking for

Let me post a step by step bare with mehttps://www.dieselhub.com/maintenance/47rh-47re-transmission-service.html

What is the transmission oil pan nuts torque sequence

I’ll try to post that for you

Ok thanks

Snug all transmission pan bolts down then Torque to 156 in-lbs (inch pounds) in a criss-cross, star, or alternating sequence. Torque all bolts a second time clockwise or counter-clockwise around the pan to ensure none were missed