Q: Do you service zip 07005, Boonton, NJ?

Hey there, thanks for writing in about your 2001 Chrysler LHS. The body control module (BCM) controls the interior lights for this vehicle. The BCM gets inputs for the interior lights to come on by any one of the door...

Hi, thanks for your question. If the relay is not making a good contact inside the relay socket, I suggest inspecting the old relays that came out and see if one or more of the pins look like they got...

Hello. The numbers you have provided did not yield any results through my search. If the part numbers are different, and the ends are physically different, then they may very well be different coils or it may just be an...

The battery going dead (https://www.yourmechanic.com/services/battery-is-dead-inspection) in a couple of days is not normal and if you did the parasitic drain test correctly, then you are correct to condemn the alternator for the excessive draw. The alternator is most likely shorting...

Hello, when you removed the pump you may have relocated clutch plates in the input housing. These plates must align with a hub assembly. What happens is that the pump puts pressure on the housing because there is no...

This may be a sign of a dirty or failing mass air flow sensor. The mass air flow sensor is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being injected...

Hi there - if your car stutter-starts (https://www.yourmechanic.com/question/car-takes-multiple-tries-to-start-when-cold-fine-when-warm-new-battery-dlr-says-check-valve-on-fuel-pump-assembly-needs-entire-assembly-by-scott-f), but runs fine once it is running, you probably have a problem with the fuel system check valve. This valve maintains some fuel pressure in the system so that your car starts...

Check the engine management control fuse (3amp) in the fuse box next to the battery. this fuse is only 3 amp and can easily burn out giving the symptoms you have. Also check the fuses in the fuse box below...

Hi Alfred. Thanks for contacting us today. In mechanical repairs, there is a huge difference between the effectiveness of whether something can be done - vs. whether it should be done. Generally speaking, an aftermarket PCM CAN be installed -...