Front wipers don't work at all rear has intermittent only...


Front wipers don't work at all rear has intermittent only. I've replaced the switch and relays its a 2008 land Rover lr2 Mechanic's Assistant: How many miles are on the Land Rover? Has the Land Rover been starting normally...

Front wipers don't work at all rear has intermittent only. I've replaced the switch and relays its a 2008 land Rover lr2 Mechanic's Assistant: How many miles are on the Land Rover? Has the Land Rover been starting normally? It has around 130000 had a little drag on starter but cranking normally now Mechanic's Assistant: Are you fixing your LR2 yourself? What have you tried so far? I own a body shop and do all my own work but this has become a nightmare I've checked about everything everything I'm thinking maybe the motor but wanted your advice Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I guess not Thanks


Waiting on mechanics
Automotive Expert
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day. Do you have a scan tool to see if the central electronics module is getting a correct signal from the wiper switch?

My scan tool test me that it's a relay but I think it's the motorvbb NJ just wanted you I r advice before spending another chunk of cash
Automotive Expert
You kind of lost me with this comment. **scan tool test me that it's a relay but I think it's the motorvbb NJ**

I don't know with that I had to get another phone souvenirs checked relays replaced switch and checked motor ,motor is very hard to turn so I suspect that to be the culprit, but when I bench tested it test ok
Automotive Expert
Do you have a scan tool to see if the central electronics module is getting a correct signal from the wiper switch?
Automotive Expert
Since you were not able to reply to the info request I sent. I cannot be as accurate and thorough as I would like in my answer. I hope what I can provide does help. If the CEM is showing to get the correct signal then the concern will be a faulty CEM for not sending the signal back out. Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose

What others are asking

How do I adjust the clock between 12-hour time and 24-hour time?
You can choose whether the clock is in 12-hour time, or 24-hour time, with just a few steps: 1. Turn the ignition to On, while making sure the vehicle is completely stopped. 2. Press the Menu button. 3. Use the...
Car stalling out briefly at 70 MPH
Hello. If there is a problem with the variable valve timeing, VTEC, or with the oil pressure, then the vehicle will definitely act this way. The oil leak needs to be found first. It should not be hard since it...
Speedometer broken in 2001 Nissan Maxima
If your speedometer is inoperative this will cause your odometer to not work as well. This is because they use the same sensor to calculate speed and distance traveled. There is a problem with your vehicle speed sensor. It could...
power steering pump makes noise.
The power steering pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-power-steering-pump) may be going bad if you are hearing a grinding noise. The fluid should not be red, unless the fluid was flushed out and replaced with transmission fluid. Power steering fluid is light brown like...
all lights on the left side of my car wont work
The rear lights share the same power and the same ground so these may be bulb issues. The front lights, however, have the same power but different grounds. The grounds for the left side is in the left front corner...
How to get rid of "transport mode contact dealer" message
Hi, thanks for writing in. This message is manufacturer-specific. I would recommend taking the car to the Ford dealer to have this shut off.
Blown fuse or computer system?
Since you shorted the electrical system, you may have damaged electrical components. The main fuses that power each and every circuit on the car may have been shorted and burned out. You should first check each and every fuse in...
joe what the fuck is wrong with my car
Hi there: Overheating problems can be caused by a water pump (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-water-pump-auxiliary) that is faulty, coolant lines with obstructions or air bubbles trapped or leaking coolant levels. The best way to determine the precise source of your overheating issue on...
Went in for an oil change and came out with a non working car.
Hi there. First check the ECM (computer) for any codes that could be store as the check engine light came on. Before blaming any location for the vehicle's running condition, check to see what codes are stored to have a...