The front right wheel wobbles from right to left when jac...


The front right wheel wobbles from right to left when jacked up Mechanic's Assistant: Besides this, what condition is the car in? All working Mechanic's Assistant: What is the make/model/year of your car? Suzuki ...

The front right wheel wobbles from right to left when jacked up Mechanic's Assistant: Besides this, what condition is the car in? All working Mechanic's Assistant: What is the make/model/year of your car? Suzuki swift 2010 Mechanic's Assistant: Are you fixing your Swift yourself? What have you tried so far? Yes and i have replaced the lower control arm and pinching bolt Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? The track rods look all good

Automotive Expert
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. Let's get started! Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* and I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime. can you see whats loose?

It looks like the end the lower ball joint goes into is too big
Automotive Expert
it the hole oblonged from wear?

Im not sure it could be, i replaced the lower control arm today and check for play and looking underneith while wobbling it it looks like the ball joint is moving inside the hole
Automotive Expert
then either the ball joint is wrong or the steering knuckle is damaged and will require replacement

Is the steering knuckle the hole?The pinching bolt was also bent when i took it out
Automotive Expert
yup its the whole piece that connects to the ball joint an the strut and the bearing

What others are asking

My driver's side headlight won't turn on and a new bulb didn't fix it
Your vehicle has a recall on the headlight wiring connectors and bulbs. If the connectors do not have a made in Mexico tag on them, then they will need to be replaced with new bulbs and connectors as per recall...
Uneven tire wear and excessive shaking in the steering wheel once hitting highway speeds.
Hi there, thanks for writing in. Based on your description of the symptoms and tire wear, it seems that your mechanic probably is correct. When the tie rod and ball joints (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-tie-rod-end) are damaged, they will cause the suspension to...
My car won't start back up after idling and won't read codes
With the car idling for an extended period, your engine compartment will get extra hot and this may cause the ignition module to fail, resulting in a stalled engine that will not restart. In order to determine whether the ignition...
Skipping 2nd gear
Hi there. It sounds like you may have a shift solenoid or sticking valve concern. Are there any warning lights illuminated? What is the current condition of the transmission fluid? Proper testing of the shift solenoids will require a capable...
I replaced my SM module fuse box relay.Do I have to reprogram it
The SAM will need to be programmed in order to be able to communicate on the network of modules in the car. The dealer module scanner will be needed to do the programming or the module will not work correctly....
Having delayed shifting issue with my car. It does it more when you accelerate fast. If you accelerate slow it shifts 2003 Honda CRV
Hi there - your slow-shifting behavior is reported fairly often on this vehicle, with an internal transmission fluid pressure leak (linear solenoid gasket) a common culprit. You don't mention your mileage, but I recommend a fluid and filter change -...
Can a 96 Lexus es300 transmission fit in a 00 es300?
The 1996 Lexus ES300 used a Type A541E transmission while the 2000 model year used a Type U140E. The two transmissions are completely different. If you are looking for a transmission for your 2000 Lexus, simply go to Car-Part.com (http://www.car-part.com)...
Hi i started my van this morning it was fine last night. And now it sound like a tractor it a Vauxhall vivaro its still running fi
You should check the oil levels in the engine first to see if it is low. If not low then check gauges to see if any oil pressure loss or other lights are on? If any lights are on then...
Car won't crank even when jump started
If not even the lights work, there is probably a major fuse or fuses (or fusible links) that have blown and/or a major wiring fault. If you want the required diagnostic steps performed by a certified Mechanic, dispatched by YourMechanic...