Second opinion] My 06 charger died one night and I’ve cha...


Second opinion] My 06 charger died one night and I’ve changed the starting the throttle body and the battery and the spark plug and now it starts but won’t stay started Mechanic's Assistant: Have you changed a battery befo...

Second opinion] My 06 charger died one night and I’ve changed the starting the throttle body and the battery and the spark plug and now it starts but won’t stay started Mechanic's Assistant: Have you changed a battery before? No first time Mechanic's Assistant: Are you fixing your Charger yourself? What have you tried so far? I’ve changed the throttle body the starter and all the spark plugs Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? And my alarm system doesn’t come on no more

Automotive Expert
Thanks for using JustAnswer.com! My name is \*\*\*\*\* \*\*\*\*\* I'll try to answer your car questions. I'll start off with some basic checks to do, then we can get into more advanced diagnostics if needed. Let me know if any questions come up, or if there is anything I can do to help! You can update this message at anytime. - There may be a problem with the security system, have had to reprogram the ignition keys and replace the ignition modules before. - Check for communication with the ignition control module, and all other computers on the car, and list any that are offline, or any codes that youre seeing. Double check fuse panel power supply with key on, and make sure no fuses are blown. List any codes youre seeing and I'll look up diag/repair procedures. - Lemme know what youre seeing, or if any questions come up while checking things out!

What others are asking

How do I change the Trip A or Trip B reset trigger?
Your vehicle has two trip settings, which measure how far you have driven since the last reset. Each trip meter can be programmed to reset when you refuel, when you turn the vehicle off, or when you manually reset. To...
SUV hesitates when air on
Hi. The AC compressor runs off the serpentine belt which is driven by the engine. Therefore, turning on the AC puts a load on the engine. If there is a problem with the compressor, this may max the engine more...
Vehicle won't start, once it's jump started it only stays running until you turn it off, then it work start again without jumping.
Hi there. There could be two problems here. It is possible that your battery is bad and will not take a charge from your alternator while driving. In that case every time you shut your car off you will not...
When I accelerate quickly the Check Engine Light comes on.
This may be related to many different things, such as a failing throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) or a bad mass air flow (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) sensor. The throttle position sensor relays the position of the throttle plate relative to your foot's position...
Rpms won't drop.
It is possible you have a large vacuum leak or the idle air control valve is stuck in a position best suited for colder weather. A vacuum leak will allow unmetered air into the engine causing the computer will add...
Grinding noise when braking and turning left.
Hi there. The grinding noise seems to be a rotating item on your vehicle. Check the wheel bearings on the front of the vehicle and see if there is any dust around them. If there is dust, then the bearing...
Glow plug light flashing and esp light is on. Scanned the car and got a code 000812. Brake pressure release solenoid f84.
Hi there. Either the drainage holes are blocked, or ECU housing seal is damaged causing water to enter the ECU housing. Take a look around the ECU and see if there is any standing water or moisture areas. If there...
How much would an estimate be on fixing both inner and outer tie rod ends?
If you have already obtained a conclusive diagnostic and, on the basis of that, want to replace only the tie rod ends, you can obtain the written quote that you have requested, and schedule the repair to suit your needs,...
No reverse seems to be stuck in second gear
If the vehicle is in gear (moving) while the shift selector is in park that means the shift lever adjustment is off. There is a lever on the transmission that operates the manual valve and that lever has to be...