Car lost power and went into limp mode diagnostics says [...
Responses
David Craig
222 days ago
Hello, my name is \*\*\*\*\* \*\*\*\*\* to just answer! I will be assisting you with all of your vehicle questions today. I’m really sorry that you’re having this issue and I’m going to help you through it, but please understand that I (respectfully) don't know your skill level or tools you have to assist us to diagnose/repair your vehicle. Also, understand that I can't see, smell, hear or touch the vehicle either, so your patience/understanding is appreciated. Please allow me up to 10 minutes to gather schematics and other pertinent information for this issue. I do not know anything about the fees or charge so please if you have any concerns, direct them to customer service. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. I appreciate your patience and will provide responses as soon as possible. Thank you
David Craig
222 days ago
that's exactly what's going on here. it is a known issue. please see attachments
David Craig
222 days ago
I will be back on in a bit if you have any other questions.
Customer
222 days ago
Okay thanks I’m looking at the infoI also received a P0751 shift solenoid A performance. Is one of these things caused by the other or are they both needing repair
David Craig
222 days ago
2 different issues. please standby
David Craig
222 days ago
please see the information on P0751 (attached) there's something going on inside the transmission, probably a shift solenoid, but there has been internal damage found related to this code also.
Customer
222 days ago
Thanks a lot, David.
David Craig
222 days ago
you are very welcome. please keep me posted and please stay well.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Lights work, but car won't start.
I would need more information to determine the problem. If you hear a clicking noise but the engine wont turn over, then your battery may not have enough charge or may have a bad connection. Test the battery, if the...
Air conditioner causing car to overheat
We need to determine if your vehicle is actually overheating, or if the gage is just reading incorrectly. If your vehicle is overheating; you will no doubt have boil over from the radiator or reservoir. The fact that your gage...
Idling roughly and stalling
If you are referring to your head gasket, it is possible that something may not have gone back together correctly in the process. If the gasket did not seal, this could cause compression issues which could cause your engine not...
Whining when off clutch and tapping from engine when cold
Hello. The whining noise you are hearing is typically from the pilot bearing located at the rear of the crankshaft. It can be an internal transmission issue but that is not as common. I typically check and even change the...
Randomly shuts off no matter how much fuel is in vehicle, no acceleration/stalling when pushing pedal.
Hello and thank you for writing in! When was the last time you changed the fuel filter? The filter can have a huge effect on how much fuel is delivered to the engine. With the age of your vehicle, there...
Interior lights won't turn off - 1997 Jeep Grand Cherokee
Hello. You are absolutely heading in the right direction. Finding out where the voltage is coming from might be easier to track with a voltmeter and wiring diagram of that circuit if you are equipped with such. This is the...
Would an ignition cylinder from a 99 4Runner fit a 91 4Runner?
Generally, a switch assembly from 1989 through 1994 will work on this vehicle, but to get a precise answer if you plug in your vehicle data on-line at Car-Part.com (http://www.car-part.com) you will get not only all possible interchange years but...
engine makes a rattle noise on cold start. Noise goes away as it gets warm. When i turn on the ac the rattling noise is louder.
Among the possible sources of this noise are accessory drives (pulleys, alternator, etc.), the timing belt (or serpentine belt) tensioner, and loose heat shields. The fact that use of the a/c worsens the noise would point toward the serpentine belt...
Browse other content
Estimates
Services
Cities
Car lost power and went into limp mode diagnostics says [timing chain](/topics-timing-chain/) P0008 was told the chain may be loose. Mechanic's Assistant: Is the power loss consistent, or does it fluctuate? Consistent <b...
Car lost power and went into limp mode diagnostics says [timing chain](/topics-timing-chain/) P0008 was told the chain may be loose. Mechanic's Assistant: Is the power loss consistent, or does it fluctuate? Consistent Mechanic's Assistant: What is the make/model/year of your car? 2008 Cadillac [cts](/topics-cts/) Mechanic's Assistant: Are you fixing your CTS yourself? What have you tried so far? No Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Also got a P0751 shift solenoid error code