Q: Brakes

There is a good chance that the gate sensor is malfunctioning. This is not an uncommon problem. I would enlist the help of a qualified technician to pinpoint the problem and confirm that the sensor is malfunctioning.

Those codes: P0170 (https://www.yourmechanic.com/article/p0170-obd-ii-trouble-code-fuel-trim-malfunction-bank-1-by-andrew-quinn), P0173 (https://www.yourmechanic.com/article/p0173-obd-ii-trouble-code-fuel-trim-malfunction-bank-2-by-blake-griffin), and P0335 (https://www.yourmechanic.com/article/p0335-obd-ii-trouble-code-crankshaft-position-sensor-a-circuit-malfunction-by-spencer-clayton) are indicating that the airflow coming in that is read by the MAF sensor to set up fuel injection timing does not match what the oxygen sensors are reading based on...

The Audi Q5 has an AdBlue filler cap located next to the fuel filler cap on the side of the car. Some Audis are supplied with a hexagonal AdBlue filler cap, which requires the wheel nut wrench from the boot....

Hello - your symptoms suggest that the throttle position sensor has failed. This would not be unusual for a vehicle with your extended mileage. I would recommend having a Car Hesitates during Acceleration Inspection (https://www.yourmechanic.com/services/engine-hesitates-during-acceleration-inspection) completed by a mobile, professional...

This year model of vehicle does have several caliper applications depending on specifics such as a 15" tire, 16" , whether is has rear drum and so forth and they all may bolt up in a similar way, but do...

Hello, thank you for writing in. The passenger (right) side of the vehicle (on yours and a lot of other vehicles) holds a computer system behind the fender (just under the floorboard). This is the box that controls the power...

Prior to replacing the throttle body, you should go through the Ford diagnostic procedure in the Factory Service Manual for this part to ensure that you do not replace a perfectly good part. The removal procedure is to first remove...

Unless you are confident that the brakes are now working normally, they should be evaluated. As far as the warning light, typically there will be stored diagnostic codes that have caused the light to illuminate. Those codes should be evaluated...

You should remove key FOB from vehicle and close and lock all doors and hood and then let vehicle sit for at least 10 minutes or up to 30 minutes and then using key FOB to unlock doors and see...