Volvo 780 Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Volvo 780 Water Pump Replacement is $405 with $125 for parts and $280 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Volvo 780L4-2.3L TurboService typeWater Pump ReplacementEstimate$622.86Shop/Dealer Price$704.76 - $933.45
1990 Volvo 780V6-2.8LService typeWater Pump ReplacementEstimate$863.45Shop/Dealer Price$985.72 - $1341.40
1990 Volvo 780L4-2.3L TurboService typeWater Pump ReplacementEstimate$603.94Shop/Dealer Price$682.18 - $908.13
Show example Volvo 780 Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(10)

Rating Summary
8
0
0
0
2
8
0
0
0
2

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Volvo XC90 L5-2.5L Turbo - Water Pump - San Ramon, California
Great guy. He knows his craft. Prompt.

Luke

18 years of experience
322 reviews
Luke
18 years of experience
Volvo XC90 L6-3.2L - Water Pump - Georgetown, Texas
Very nice experience with Luke, dealing with the company is a totally different story.

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Volvo S70 L5-2.4L Turbo - Water Pump - Loganville, Georgia
Always one of the best they got!!! E is over the top and know his Shit! I Tell you no lie. He is a must have to work on your vehicle.

Rusty

24 years of experience
567 reviews
Rusty
24 years of experience
Volvo S60 L5-2.5L Turbo - Water Pump - Arlington, Texas
Very professional

Excellent Rating

(10)

Rating Summary
8
0
0
0
2
8
0
0
0
2
Number of Volvo Water Pump Replacement services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Lexus IS
If If you haven’t heard of the 2012 Lexus IS, you’re not alone. This sports sedan is incredibly underappreciated. However, that doesn’t mean it’s not worth considering for your next car. Key Features The 2012 Lexus IS can be purchased...
How Long Does a Cooling Fan Resistor Last?
The The purpose of the cooling fan resistor is to remove heat from the engine’s coolant and from the A/C refrigerant. The resistor does this by drawing air through the radiator and air conditioning condenser. A belt drive fan is...
P3409 OBD-II Trouble Code: Cylinder 2 Deactivation/Intake Valve Malfunction
P3409 P3409 code definition The P3409 code is Cyl2 Deactivation/Intake Valve Control Circuit/Open. Cyl2 narrows the issue down to engine cylinder number 2. Other codes in the P3400 series may present concurrently with P3409, indicating a problem with another cylinder’s...

Will a tear in the air filter make a humming/fluttering sound?

Hi there, thanks for writing in. A tear in the air filter can make a fluttering noise. Another possible source of the noise is the DISA valve at the top of the intake manifold. The DISA valve is what controls...

Need help from a Mechanic: EVAP Purge Valve bill

The part is only about $35, so then that leaves about $200 in labor. This labor should be better-explained to you so you know what was done. The labor to replace the purge valve on the engine is only 0.6...

I'm replacing my gas cap with a regular black one though I drive an e85 flexfuel that's got a yellow cap, is that ok?

Gas caps are no longer mundane, low tech devices. The only replacement gas cap that a knowledgeable, professional mechanic will recommend is an OEM cap, supplied by the dealer, and matched to your vehicle VIN number. Any other cap, including...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com