Toyota Crown Proportioning / Combination Valve Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(18,099)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(18,099)

Proportioning / Combination Valve Replacement Service

How much does a Proportioning / Combination Valve Replacement cost?

On average, the cost for a Toyota Crown Proportioning / Combination Valve Replacement is $513 with $359 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
Show example Toyota Crown Proportioning / Combination Valve Replacement prices

What is the Proportioning / Combination Valve all about?

Your braking system relies on hydraulic pressure to operate. When you depress the brake pedal, brake fluid is pushed through the system to the wheels. Fluid pressure is responsible for actuating both disc brake calipers, as well as drum brakes. However, there are numerous components in line between the brake pedal and the brakes themselves, including the combination valve.

The combination valve is responsible for metering fluid to disc brakes, as well as fulfilling tasks done by both the pressure differential switch and proportioning valve (which is responsible for reducing the fluid pressure in the lines leading to the rear drum brakes). This is necessary because of how brakes work in terms of lockup – the more weight there is on a wheel, the more force can be applied without locking up the brakes. In rear drum brakes, the weight on the wheel is comparatively small (the weight of the engine on the front wheels is considerable).

Keep in mind:

  • In modern cars that employ combination valves, replacing the entire valve body is necessary if the proportioning valve fails.
  • There is no way to check operation on this type of valve unless it has failed completely.
  • The valve may have failed due to many reasons, including debris in the brake fluid.

How it's done:

  • The defective proportioning combination valve brake lines are disconnected
  • The defective proportioning combination valve is removed from the vehicle
  • The new proportioning combination valve is installed and the brake lines are connected to valve
  • The brake system is bled and purged of air in the system and the brake fluid is refilled
  • The vehicle is road tested for proper brake operation

Our recommendation:

Follow your automaker’s recommendations on brake system service to ensure that the fluid remains in good condition and free of debris. Have your braking system maintained by our expert mechanics to ensure that any potential problems are caught as soon as possible. Driving with a failing proportioning valve puts you at increased risk.

What common symptoms indicate you may need to replace the Proportioning / Combination Valve?

  • Rear brakes lock up easily, particularly on wet pavement

How important is this service?

While it is still possible to drive with a failed or failing proportioning valve, it’s not recommended because it decreases your safety while increasing the risk of being involved in an accident because your rear brakes lock up under even light loads. Have the entire combination valve assembly replaced immediately.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(18,099)

Rating Summary
17,047
626
116
76
234
17,047
626
116
76
234

Derrick

21 years of experience
109 reviews
Derrick
21 years of experience
Toyota Sienna V6-3.5L - Oil Change - Middle Village, New York
Excellent service and he showed up early!

Chris

23 years of experience
2372 reviews
Chris
23 years of experience
Toyota Prius L4-1.8L Hybrid - Ignition Coil - Murrieta, California
Chris was right on time even a few minutes early. He was very professional, friendly, and knowledgeable. I had a great experience with the service and will use again if needed in the future.

Tien

24 years of experience
903 reviews
Tien
24 years of experience
Toyota Highlander V6-3.0L - Timing Belt - Hayward, California
Did another timing job on my parents car, could not be more happier for the awesome service received

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Toyota Sienna V6-3.3L - Ignition Coil - Cibolo, Texas
Gustavo is #1

Excellent Rating

(18,099)

Rating Summary
17,047
626
116
76
234
17,047
626
116
76
234
Number of Toyota services completed
199089+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Faulty Door Lock Switch
If the door locks are not functioning well or the door lock button is broken, you may need to replace the door lock switch.
B1948 OBD-II Trouble Code: Climate Control Water Temperature Sensor Circuit Short To Ground
B1948 means there is a fault in the coolant temperature signal circuit, likely due to a problem with one of the electrical components.
A Buyer’s Guide to the 2012 Acura RL
The The 2012 Acura RL is a luxury four-door sedan that offers a decent amount of interior space and seating, as well as appreciable performance (although it’s limited to just a V6 engine). The RL ended production after the 2012...

Overheating way to fast

Hello. If the engine overheats this fast then you should do a block test. This sounds like a blown head gasket or a cracked head. When this occurs combustion pressure enters the cooling system and causes this to occur. I...

Brake master cylinder leaking, clutch jammed up. Is quote for new clutch that doesn't mention brake master reasonable? 1998 Ford Escort

Hi there - I think the fact that the brake and clutch hydraulic system share the reservoir is confusing how to repair 2 separate issues. For sure, your brake master cylinder (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-brake-master-cylinder) appears to be failing, and should be replaced....

Very slow coolant leak

Hi there. I wouldn't assume that you have a coolant leak based on coolant being present after the vehicle overheated. In most cases, the coolant will boil out of the radiator cap and cause this type of 'spillage'. If you've...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com