Suzuki Swift Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Suzuki Swift Car Battery Replacement is $291 with $151 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$456.16Shop/Dealer Price$535.05 - $763.62
1998 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$524.27 - $751.52
1994 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$473.53Shop/Dealer Price$557.27 - $804.32
1997 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$524.30 - $751.56
1993 Suzuki SwiftL3-1.0LService typeCar Battery ReplacementEstimate$465.99Shop/Dealer Price$549.32 - $791.82
2001 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$524.44 - $751.81
1999 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$447.15Shop/Dealer Price$524.31 - $751.59
1990 Suzuki SwiftL4-1.3LService typeCar Battery ReplacementEstimate$473.53Shop/Dealer Price$557.27 - $804.32
Show example Suzuki Swift Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0

William

21 years of experience
129 reviews
William
21 years of experience
Suzuki Swift L4-1.3L - Car is hard to shift - Cape Coral, Florida
Saved me a lot of time and money I would use him again!

Scott

39 years of experience
607 reviews
Scott
39 years of experience
Suzuki Esteem L4-1.8L - Battery - Westminster, Colorado
scott is a very nice and knowledgable man told me everything I needed to know. want to use him again

Robert

32 years of experience
646 reviews
Robert
32 years of experience
Suzuki * * - Battery - Sunnyvale, California
Very helpful and fun gentleman. Took care of everything on getting my jeep on and running which is 20 years old. I highly recommend him for any mechanical needs.

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Suzuki Forenza L4-2.0L - Battery - Upland, California
We have used Jay for a prior repair on our elderly mother's vehicle. When she had another issue, we did not hesitate to request Jay again for the repair. He has been on time, diligent and very informative of the repairs and potential issues.

Excellent Rating

(14)

Rating Summary
14
0
0
0
0
14
0
0
0
0
Number of Suzuki Car Battery Replacement services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Does a Cracked Window Need to Be Replaced?
Windows Windows are not just for looking through. Though it may seem that visibility is the sole purpose of your car’s windows, they are also for structural support. Every piece of glass on your car -- the windshield, rear window,...
How to Register a Car in New York
For For some, moving to New York is a lifelong dream that they will stop at nothing to achieve. While moving to the Big Apple is exciting, there are a number of things that you will need to do. The...
B1972 OBD-II Trouble Code: Passenger Rear Seat Up Switch Circuit Short to Battery
B1972 means there is a circuit failure in a passenger rear seat up switch, likely due to damaged electrical components or a faulty switch.

How do I use ParkSense rear park assist?

The ParkSense rear park assist feature helps you detect items behind you when you’re reversing your vehicle. The park assist comes on only when your vehicle is in REVERSE, and only when you are driving at less than 11 mph....

Car not starting due to security code.

Hi there. This comes up frequently on this vehicle. The two most common problems that I have found that cause this is either a failure in the passlock sensor in the ignition lock cylinder, or the body control module has...

Hi, I have a 2003 pontiac sunfire that is getting water in my engine. It looks like water is leaking from somewhere between my eng

Engine coolant can leak externally through a hose, radiator, water pump, etc. or internally due to a leaking head gasket and sometimes a leaking intake manifold gasket depending on the engine design. External leaks are typically found by simple pressure...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com