logo

Suzuki Samurai Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(9)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Suzuki Samurai Control Arm Assembly Replacement is $419 with $223 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Front Upper Right ReplacementEstimate$700.44Shop/Dealer Price$822.83 - $1177.83
1993 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$726.33Shop/Dealer Price$859.38 - $1252.76
1994 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$726.33Shop/Dealer Price$859.41 - $1252.82
1992 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$726.33Shop/Dealer Price$859.41 - $1252.82
1991 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$659.71Shop/Dealer Price$778.20 - $1123.19
1991 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$686.67Shop/Dealer Price$810.03 - $1173.84
1994 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Rear Lower Left ReplacementEstimate$650.71Shop/Dealer Price$764.91 - $1101.62
1990 Suzuki SamuraiL4-1.3LService typeControl Arm Assembly - Rear Lower Right ReplacementEstimate$659.71Shop/Dealer Price$776.14 - $1119.58
Show example Suzuki Samurai Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Suzuki Samurai services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(9)
Rating Summary
9
0
0
0
0
9
0
0
0
0

Grzegorz

42 years of experience
473 reviews
Request Grzegorz
Grzegorz
42 years of experience
Request Grzegorz
by SJ
Suzuki Samurai L4-1.3L - Axle Shaft Seal Replacement (Front) - San Bruno, California
Gregory did an excellent job on my Samurai. He was also very patient in explaining all the work involved and helpful through the whole process.

Frank

28 years of experience
66 reviews
Request Frank
Frank
28 years of experience
Request Frank
by Taylor
Suzuki Samurai L4-1.3L - Pre-purchase Car Inspection - Denver, Colorado
Incredibly thorough and communicative. Had him take a look at an old Suzuki Samurai and even though the car is nearly 30 years old, Frank was more than familiar with all of it's workings and quirk.

Chris

23 years of experience
2372 reviews
Request Chris
Chris
23 years of experience
Request Chris
by Anthony
Suzuki Samurai L4-1.3L - Starter - Lake Elsinore, California
Quick and easy! Knows his craft, he will be my mechanic from on.

David

29 years of experience
142 reviews
Request David
David
29 years of experience
Request David
by Howard
Suzuki Samurai L4-1.3L - Engine idle speed is high - San Diego, California
David showed up and got right to work on the car. Within 10-15 min. he found the problem and fixed a high idle issue. He even helped with a lock issue that was out of his scope of duty. Friendly and efficient. Great guy

Excellent Rating

(9)
Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Suzuki Samurai services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

What type of vehicle is right for you?
Sedans, coupes, convertibles, minivans, crossovers, hatchbacks, station wagons, SUVs, and pickups. Let us help you decide which to choose.
Read more
How to Replace a Camshaft Position Sensor
Camshaft position sensors determine the position of the camshaft in relation to the crankshaft to control the fuel injector.
Read more
How to Install a Car Window Deflector
Ventshade vent visors on your car windows help keep the sun and rain out while allowing fresh air inside the car. The window guards also deflect wind.
Read more

How does the audio system theft protection work?

Your car’s radio has protection against theft in the form of a special code that has to be put in to get the radio to work if it ever loses power. This code will also need to be entered in...
Read more

blown head gasket been sitting for a year now

My best guess is that your lower engine has water mixed with the oil. This may have damaged the lower bearings of the engine. I don't think a reseal will work since you will need major work on the engine...
Read more

2010 Chevy Aveo. Overheating.

A faulty temperature gauge should be ruled out (direct temperature measurement would accomplish that) but, based on the "sequence" you are describing it does sound like real overheating. Other causes of overheating, not included in your list, are trapped air,...
Read more
  1. Home
  2. Estimates
  3. Suzuki
  4. Samurai
  5. Control Arm Assembly Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE