Suzuki Samurai Clutch is not fully disengaging Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(8)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(8)

Clutch is not fully disengaging Inspection Service

How much does a Clutch is not fully disengaging Inspection cost?

On average, the cost for a Suzuki Samurai Clutch is not fully disengaging Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1995 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1994 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1993 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1985 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1990 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1987 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1986 Suzuki SamuraiL4-1.3LService typeClutch is not fully disengaging InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Suzuki Samurai Clutch is not fully disengaging Inspection prices

Your car’s clutch is what allows you to change gears. When you press the clutch pedal, the clutch moves away from flywheel, stopping the rotation and allowing you to shift to a higher or lower gear without causing damage (grinding gears does your transmission no good at all). When you release the clutch pedal, the clutch should press up against the flywheel and you should be able to proceed in the newly selected gear. However, there are some situations in which the clutch may not fully disengage.

How this system works:

To put it in a nutshell, clutches work based on friction. When the clutch pedal is pressed, either a cable or a piston (depending on the type of clutch is installed in your vehicle) will push the release fork. This causes the throw out bearing to press against the diaphragm spring.

The center of the spring is pushed in, which engages a series of pins. These pull the pressure plate away from the clutch disc and separate the clutch from the engine flywheel. When you take your foot off the pedal, the reverse happens, and the clutch is engaged.

Clutch components are subject to a significant amount of wear and tear (because they work on friction – this is normal). The most common problem here is the disc wearing. The material is a lot like what you’ll find on your brake pads, and the operating concept is also very similar. Of course, that creates slippage, which isn’t the problem here. Failure to disengage is called “sticking”, and there are several potential causes.

Common reasons for this to happen:

  • Stretched/Broken Clutch Cable: If the clutch cable is broken or stretched, then the clutch will stick (not disengage). You’ll notice the sticking becoming more and more common as the cable continues to stretch.

  • Leaking Hydraulic System: If you have a hydraulic clutch, it’s possible that either the slave or master cylinder (or both) is leaking. This means that insufficient hydraulic pressure is built up for the clutch system to operate correctly.

  • Misadjusted Linkage: The linkage connects the clutch pedal to the transmission. If it’s incorrectly adjusted, the clutch may not disengage properly.

  • Incompatible Aftermarket Parts: If you’ve recently had clutch work done, it’s possible that aftermarket components were installed in your car. Not all aftermarket parts will work correctly with your clutch, and this can cause it to not fully disengage.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the entire clutch system and determine the source and cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will need to inspect the clutch, as well as the cable or hydraulic system. Both a visual inspection and a test drive may be required. Once the underlying cause has been determined, the mechanic will recommend the next step.

How important is this service?

If your clutch is not fully disengaging, it means that the flywheel and clutch disc are not fully separating. This causes additional wear not only on the clutch material, but on other components in the system (including the input shaft).

The best defense against transmission problems is to ensure that you work with a reputable mechanic for general maintenance who can inspect and troubleshoot problems as they arise. It’s also important to ensure that any aftermarket clutch components installed are fully compatible with your vehicle. If you’re experiencing problems with the clutch not fully disengaging, one of our professional mechanics can inspect and repair the problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Frank

27 years of experience
66 reviews
Frank
27 years of experience
Suzuki Samurai L4-1.3L - Pre-purchase Car Inspection - Denver, Colorado
Incredibly thorough and communicative. Had him take a look at an old Suzuki Samurai and even though the car is nearly 30 years old, Frank was more than familiar with all of it's workings and quirk.

Brett

25 years of experience
213 reviews
Brett
25 years of experience
Suzuki Samurai L4-1.3L - Serpentine/Drive Belt - Charlotte, North Carolina
Great!

David

28 years of experience
142 reviews
David
28 years of experience
Suzuki Samurai L4-1.3L - Engine idle speed is high - San Diego, California
David showed up and got right to work on the car. Within 10-15 min. he found the problem and fixed a high idle issue. He even helped with a lock issue that was out of his scope of duty. Friendly and efficient. Great guy

Chris

22 years of experience
2241 reviews
Chris
22 years of experience
Suzuki Samurai L4-1.3L - Starter - Lake Elsinore, California
Quick and easy! Knows his craft, he will be my mechanic from on.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Suzuki Samurai services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does an Air Cleaner Temperature Sensor Last?
An An air cleaner temperature sensor is not overly common on newer vehicles. This is because in order to ensure that your car engine operates the way it should, several electronic sensors may actually be needed. However, if you drive...
How Long Does a Center (Drag) Link Last?
The The center link has ball joints on either end, and connects the pitman arm and idler arm on your car’s suspension. This part is sometimes called the relay rod or the drag link. The main purpose of the center...
The Guide to Legal Car Modifications in Ohio
ARENA Creative / Shutterstock.com Whether you live in Ohio or plan to move to the state, you need to know the laws concerning vehicle modification. The following information will help you keep your car street legal when...

I am looking for a part online but cant find one; ae8g-6n664-ba. For a ford fiesta 2011. What is the part name? Tha Thank you

The part number that you have supplied is for a crankcase vent hose but the Ford part number for that hose in the U.S. for your year, make and model is AE8Z-6A664-A. If you google the latter number, you will...

I accidentally put diesel in a gas tank and drove like for 2 blocks.then it stoped.it does start up but does it completely. And si

The fuel system will have to be thoroughly cleaned and that's about it. A gasoline engine will not run on diesel. Your car was running during those 2 blocks on the gasoline that was in the fuel lines. Once the...

I have a 2000 suzuki grand vitara v6 5 speed manual transmission rear wheel drive. A couple weeks ago it made a loud clunking noise I stopped because i thought it was my tire. It stopped and then last weekend when i was driving and no matter what gear i was in it was still sounding like i was downshifting. Then yesterday in a parking lot had to stop for someone crossing and when i put it in 1st gear and went to release the clutch my car my the worst noise ever and the clutch wouldnt release and car stalled. Tried again and engine just revved and wouldnt move there was a very loud POP and when i went to push it into a parking spot the car would only go a little bit then stop and wouldnt go any further without making a loud popping sound. What could that be?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com