Suzuki Grand Vitara Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(84)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(84)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Suzuki Grand Vitara Wheel Stud Replacement is $194 with $52 for parts and $142 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Suzuki Grand VitaraV6-2.7LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$317.49Shop/Dealer Price$368.74 - $488.74
2010 Suzuki Grand VitaraL4-2.4LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$287.49Shop/Dealer Price$338.76 - $458.79
2006 Suzuki Grand VitaraV6-2.7LService typeWheel Stud - Driver Side Rear ReplacementEstimate$287.49Shop/Dealer Price$338.76 - $458.78
2013 Suzuki Grand VitaraL4-2.4LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$285.49Shop/Dealer Price$336.23 - $454.72
2009 Suzuki Grand VitaraV6-3.2LService typeWheel Stud - Driver Side Front ReplacementEstimate$287.49Shop/Dealer Price$338.79 - $458.82
2006 Suzuki Grand VitaraV6-2.7LService typeWheel Stud - Driver Side Front ReplacementEstimate$344.48Shop/Dealer Price$401.77 - $526.29
2010 Suzuki Grand VitaraL4-2.4LService typeWheel Stud - Passenger Side Front ReplacementEstimate$294.99Shop/Dealer Price$346.06 - $465.92
2001 Suzuki Grand VitaraV6-2.7LService typeWheel Stud - Passenger Side Front ReplacementEstimate$354.98Shop/Dealer Price$412.76 - $537.66
Show example Suzuki Grand Vitara Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(84)

Rating Summary
78
4
0
1
1
78
4
0
1
1

Milton

37 years of experience
239 reviews
Milton
37 years of experience
Suzuki Grand Vitara V6-3.2L - Lights (Headlamps/beams/brakes) - Las Vegas, Nevada
Prompt and efficient. Great job!

Ruben

10 years of experience
63 reviews
Ruben
10 years of experience
Suzuki Grand Vitara V6-2.7L - Car idle is rough - Columbia, South Carolina
Mr. Cruz was very knowledgeable,professional and easy to talk to. I would like to have him do the maintenance on my auto. Mr. Sam Jiles.

Vaughan

11 years of experience
92 reviews
Vaughan
11 years of experience
Suzuki Grand Vitara V6-2.7L - Brake Pads Replacement (Front) - Irving, Texas
GReat!

Shawn

12 years of experience
285 reviews
Shawn
12 years of experience
Suzuki Grand Vitara L4-2.4L - Car is overheating Inspection - Allentown, Pennsylvania
Courteous and on time.

Excellent Rating

(84)

Rating Summary
78
4
0
1
1
78
4
0
1
1
Number of Suzuki Grand Vitara services completed
924+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

3 Essential Things to Know About Steering Wheels and Covers
The The steering wheel on your vehicle is used to control the movement of the car. For example, when you turn the wheel left, the car will turn left and vice versa. The steering wheel is connected to the vehicle...
How Long Does a Courtesy Light Bulb Last?
The The courtesy light bulb is also called a dome light and is located on the ceiling in your vehicle. It is normally towards the front of the car and provides light when you open the car door. This light...
Top Automotive News & Stories: September 24-September 30
Angry Civic Type R, 350 special edition Ferraris, Infiniti variable compression tech, Mercedes' electric future, and more.

Engine rebuild or swap.

If your RX does indeed need and engine then you will have options depending on if you want it rebuilt, or replaced with a new, rebuilt or new unit. All of these variations will have their own costs depending on...

why wont my truck start? 2002 Chevy Trailblazer

Hello. If the car was running BEFORE you replaced all of these parts, the first thing to do is make sure that you have reconnected any wiring (harnesses, plugs, grounds) that you removed when you replaced the numerous items that...

how do wagner brake rotors and pads compae to stock GM

Hi Jerry. Thanks for writing in today. I am a fan of this brand of brake system components. However, in regards to being "better" than OEM, that's a very difficult question to provide a straight and clear answer. Generally speaking,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com