Suzuki Esteem Brake Drum Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Suzuki Esteem Brake Drum Replacement is $447 with $172 for parts and $275 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1997 Suzuki EsteemL4-1.6L	Service typeBrake Drum Replacement	Estimate$677.27	Shop/Dealer Price$792.23 - $1071.83
2002 Suzuki EsteemL4-1.8L	Service typeBrake Drum Replacement	Estimate$619.27	Shop/Dealer Price$734.28 - $1013.92
1995 Suzuki EsteemL4-1.6L	Service typeBrake Drum Replacement	Estimate$619.27	Shop/Dealer Price$734.27 - $1013.91
2000 Suzuki EsteemL4-1.6L	Service typeBrake Drum Replacement	Estimate$647.77	Shop/Dealer Price$765.70 - $1047.54
2000 Suzuki EsteemL4-1.8L	Service typeBrake Drum Replacement	Estimate$619.27	Shop/Dealer Price$734.32 - $1013.99
1996 Suzuki EsteemL4-1.6L	Service typeBrake Drum Replacement	Estimate$619.27	Shop/Dealer Price$734.27 - $1013.91
1999 Suzuki EsteemL4-1.6L	Service typeBrake Drum Replacement	Estimate$633.77	Shop/Dealer Price$748.38 - $1027.72
1999 Suzuki EsteemL4-1.8L	Service typeBrake Drum Replacement	Estimate$633.77	Shop/Dealer Price$749.46 - $1029.61

Show example Suzuki Esteem Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

Raise the vehicle and safely support it using steel jack stands.
Remove tire and wheel assembly.
Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(14)

Rating Summary

13

1

0

0

0

13

1

0

0

0

SEE REVIEWS NEAR ME

Jay

37 years of experience

953 reviews

Jay

37 years of experience

by Steven

Suzuki Esteem L4-1.8L - Power Steering Pressure Hose - Corona, California

Jay Unger repaired my older model vehicle with no problem. I have been told by others it would not be wise to fix the car based on the year and mileage of my vehicle but for under $700 my car was repaired and running like new. It sure saved going out and buying a new car with payments or buying a vehicle with potentially worse problems. He was very professional, was timely and explained everything that was wrong, what he did as to the repairs and what may be needed for future repairs. I would call YourMechanic again and ask for Jay Unger to repair my car anytime. Having the work done at home saved me drive time and down time.

Nicholas

21 years of experience

354 reviews

Request Nicholas

Nicholas

21 years of experience

Request Nicholas

by Stacey

Suzuki Esteem L4-1.8L - Car does not shift from park to drive - Denver, Colorado

Above and beyond. Helped me to book my appt after I chose the wrong service, gave a detailed report that went far beyond what I've ever experienced or expected and I'll definitely have him back for future repairs!

Jamahl

20 years of experience

830 reviews

Jamahl

20 years of experience

by Jackie

Suzuki Esteem L4-1.6L - Car is overheating - Gotha, Florida

Ralph

23 years of experience

34 reviews

Ralph

23 years of experience

by Ryan

Suzuki Esteem L4-1.8L - Throttle Control Cable - Los Angeles, California

Arrived early, great communication, knowledgeable, and did the job quickly. Awesome!

Excellent Rating

(14)

Rating Summary

13

1

0

0

0

13

1

0

0

0

SEE REVIEWS NEAR ME

Recent articles & questions

Can I Use the Rearview Mirror to Drive in Reverse?

It’s It’s tempting to throw your car in reverse and back up using the rearview mirror to see where you’re going. DO NOT DO THIS! It’s very dangerous to use the car rear view mirror to drive in reverse. This...

P0301 OBD-II Trouble Code: Cylinder 1 Misfire Detected

Diagnostic Trouble Code (DTC): P0301 P0301 code definition Cylinder 1 misfire detected What the P0301 code means There are 4-6 cylinders in...

How to Prepare for Driving in the Desert

Inclement Inclement weather and hostile environments pose a danger (https://www.yourmechanic.com/article/5-essential-things-to-know-about-driving-in-bad-weather) to motorists. Plenty of roads go into extremely remote areas, and a good percentage of these will close completely when the weather does not permit safe travel. Desert roads are...

Car is making a strange noise

You have a coolant leak in the engine which may be getting into the intake manifold. Check for leaks by having the system pressure tested. Check the corners of the intake and into throttle body to see if coolant is...

when driving speed slow down and resume to speed it begins to jerk i have to put in over drive to resume speed especially on hiway

You should have the vehicle scanned. The data from the speed sensor needs to be checked to see if the transmission or engine is the cause of the jerking. You may have a transmission solenoid that's not shifting correctly, an...

2008 chevy tahoe hybrid check engine light on

Generally, the check engine light (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) comes on when something fairly serious is going on with the vehicle. This can happen for many different reasons such as a faulty mass air flow sensor, a faulty O2 sensor, a bad catalytic...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com