Saturn LS Car idle is rough Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(6)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(6)

Car idle is rough Inspection Service

How much does a Car idle is rough Inspection cost?

On average, the cost for a Saturn LS Car idle is rough Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LSL4-2.2LService typeCar idle is rough InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LS Car idle is rough Inspection prices

A rough idling engine can be caused by a number of issues, some of them are serious while others tend to be minor, but the symptoms remain pretty much the same. The car will feel rough and bouncy when the engine is running. The car will also idle below its regular speed, display inconsistent RPMs and may produce a shaking, skipping or slipping sound when the vehicle is running.

While a rough idling engine may seem to be a simple inconvenience it often indicates a deeper problem within the engine. The vehicle should be inspected and repaired as soon as possible because small problems have a way of turning into expensive repairs.

How this system works:

The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drivetrain and the throttle pedal is not being depressed. The idle speed is measured in the revolutions per minute of the crankshaft.

When an engine is running at idle speed it generates enough power to smoothly operate equipment such as the water pump, alternator, and power steering but not enough power to move the vehicle itself. A passenger car will usually idle between 600 RPMs and 1000 RPMs. A properly functioning idle should run smoothly without skipping or slipping.

Common reasons for this to happen:

  • Dirty Fuel Injectors: The fuel injection system injects fuel into the cylinders, which creates a mix of air, and fuel to ignite and burn. Fuel injectors have tiny nozzles to spray the fuel into the cylinder and they can become clogged over time.

A clogged or failing fuel injector creates a lack of fuel in the vehicle's engine. This can cause a rough idle, it can also cause symptoms such as slow acceleration or the car not feeling as if it has enough power. If the problem is addressed early, it is possible to clean the injectors, which will restore them to full function. If this condition is not addressed in a timely manner the injectors will need to be replaced.

  • Incorrect Idle Speed: While the average idle speed falls between 600 to 1,000 RPMs, if your vehicle is experiencing a rough idle it could be due to an incorrect idle speed setting. A trained mechanic can easily adjust the idle speed, and it should stay at the proper speed. If an adjusted idle speed becomes inconsistent or changes at random intervals there may be a bigger problem that needs to be explored.

  • Vacuum Leak: If the vacuum system has a leak, it can seriously affect the ability of the vehicle’s computer to regulate the air to fuel ratio. This can lead to a rough idle and if the problem is not addressed the car may experience slow acceleration and a lack of power. Vacuum leaks should be inspected and repaired immediately.

  • Incorrectly Installed or Damaged Plugs: Spark plugs are responsible for creating the spark that allows the vehicle to burn fuel. If spark plugs are improperly installed or malfunctioning, the idle speed can be affected. The vehicle's engine may vibrate or there may be slipping or straining sounds coming from the engine.

  • Defective or Clogged Fuel Pump: A rough idle can be related to fuel delivery issues. The fuel pump, which is responsible for pulling fuel from the gas tank to the fuel injectors, can become clogged or defective. If this happens the engine will not get enough fuel, which can cause a rough idle, sputtering, stalling and even slow acceleration.

  • Clogged Fuel Filter: A clogged fuel filter can cause similar problems. The job of the fuel filter is to screen out contaminants in the fuel, over time it will become clogged and need to be replaced. A rough idle is one symptom of a clogged fuel filter.

  • Failing Electrical Components: A problem or failure in the ignition system or various electronic components can cause a rough idle. If this is the case, the problem will usually get worse as RPMs increase. Common culprits include the ignition control module, plug wires, coils, and spark plugs.

  • Defective Airflow Sensor: A defective airflow sensor can be responsible for a rough idle. A mass airflow sensor detects the amount of air coming into the fuel injection system and sends that information to the vehicle's computer. The computer uses that data to deliver the proper amount of fuel to the air in the vehicle. Over time these sensors can malfunction or become dirty. One of the first symptoms of a malfunctioning airflow sensor is a rough idle. The car may also accelerate slowly and even stutter or stall as the problem progresses.

  • Dirty Oxygen Sensor: Oxygen sensors measure how rich or lean the gases are as they exit the combustion chamber. Depending on the results, the amount of fuel entering the engine is adjusted by the vehicle computer. The ultimate goal is to maintain an ideal mixture that produces the lowest emissions. A dirty or failing oxygen sensor will usually trigger the check engine light and can lead to a rough idle, lower fuel efficiency and failed emission test.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the rough idle issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will check your car for leaks and defective parts. This includes airflow sensors, fuel pump, electronics and other important components related to your car's idling state. It may be necessary to crank the car and test drive it in order to verify the problem and provide an accurate diagnosis.

How important is this service?

A rough idling car is more of an inconvenience at first but if the problem is not solved it can quickly lead to bigger problems such as slow acceleration, stalling and eventually a vehicle that will not start at all. Most of these conditions can make the vehicle dangerous to drive. A rough idle should be inspected and repaired as quickly as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(6)

Rating Summary
5
0
1
0
0
5
0
1
0
0

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Saturn LS L4-2.2L - Coolant is leaking - Odenton, Maryland
Great Service! He was knowledgeable about what my issue was and provided me with the help that I needed.

Oscar

24 years of experience
72 reviews
Oscar
24 years of experience
Saturn LS L4-2.2L - Car is not starting - Odenton, Maryland
Oscar was very professional and knowledgeable about cars. He let me know exactly what was wrong with my car. I had been told my fuel pump was bad which is why my car wouldn't start. Well turns out that wasn't the case at all. Oscar found that it was a broken timing chain was the reason for my car not starting. I'm glad I found that out before shelling out unnecessary money on something that wasn't broken at all. All in all Great service across the board and I would highly recommend Oscar for any auto needs.

Daniel

11 years of experience
228 reviews
Daniel
11 years of experience
Saturn SL1 L4-1.9L - Car idle is rough - Chicago, Illinois
He did a good job on replacing the tensioner. However, he misdiagnosed the brakes as being less than 6mm, when it was brand new and didn't need replacing. Actually it was the swivel bar that was causing problems, not the brakes since it was new. He also overlooked the ignition coil after I found out about the problem with another mechanic from another repair shop, besides the spark plugs and wires. He needs to step up his game and this is constructive criticism so he can better next time.

Chris

22 years of experience
2235 reviews
Chris
22 years of experience
Saturn SL L4-1.9L - Car idle is rough - Laguna Woods, California
Really great service. Chris was on time, determined the problem right away and fixed it. He was also very patient and took the time to explain what was wrong and what he was doing to repair it.

Excellent Rating

(6)

Rating Summary
5
0
1
0
0
5
0
1
0
0
Number of Saturn Car idle is rough Inspection services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

What Causes Fuel Injectors to Get Clogged or Dirty?
Fuel injectors deliver fuel into the cylinder for combustion. Clogged fuel injectors can be caused by debris or impurities in the fuel.
How to Buy a Good Quality Tachometer
Tachometers Tachometers are used to let the driver know when to shift gears in a manual transmission as well as giving additional information about traction or slippage; as well as giving a quick overview of overall engine output as a...
P2401 OBD-II Trouble Code: EVAP Leak Detection Pump Control Circuit Low
P2401 P2401 trouble code definition P2401 is a OBD2 generic trouble code indicating a fault within the EVAP leak detection circuit. This code may be seen with other EVAP system codes. What the P2401 code means The P2401 trouble code...

Leak from under dash

Hello. It is likely the heater core causing the leak because it is on the passenger side and when they leak the passenger floor becomes wet. It may also be a heater core gasket that is leaking but the heater...

Bolt on bottom of transfer case. 2001 Dodge Ram 2500

Hello - I would consult a service manual on your transfer case problem (https://www.yourmechanic.com/question/why-would-a-transfer-case-jump-gears-by-kyler-m) if possible, but basic guidance would be: the "bullet" would go back in first, followed by the spring, followed by the '"bolt". Examine the "bullet" -...

clear/replace EGR valve

Hello, thank you for writing in. For exact specifications on tools needed and a step by step procedure, you will need to access a service manual for the vehicle. Typically you would expect to use a 12 mm socket or...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com