Saab 9-7x Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Saab 9-7x Power Steering Pressure Hose Replacement is $641 with $221 for parts and $420 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Saab 9-7xV8-6.0LService typePower Steering Pressure Hose ReplacementEstimate$906.88Shop/Dealer Price$1028.15 - $1367.66
2008 Saab 9-7xV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$879.85Shop/Dealer Price$995.82 - $1331.36
2006 Saab 9-7xL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1097.97Shop/Dealer Price$1268.55 - $1767.73
2006 Saab 9-7xV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$879.85Shop/Dealer Price$995.89 - $1331.48
2007 Saab 9-7xV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$879.85Shop/Dealer Price$1000.31 - $1339.22
2008 Saab 9-7xV8-6.0LService typePower Steering Pressure Hose ReplacementEstimate$879.85Shop/Dealer Price$996.32 - $1332.22
2007 Saab 9-7xL6-4.2LService typePower Steering Pressure Hose ReplacementEstimate$1097.97Shop/Dealer Price$1268.59 - $1767.81
2009 Saab 9-7xV8-5.3LService typePower Steering Pressure Hose ReplacementEstimate$879.85Shop/Dealer Price$995.89 - $1331.48
Show example Saab 9-7x Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(27)

Rating Summary
25
2
0
0
0
25
2
0
0
0

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Saab 9-7x V8-5.3L - Car is not starting Inspection - Indianapolis, Indiana
Very professional and friendly. Thank you Mike.

Alex

24 years of experience
464 reviews
Alex
24 years of experience
Saab 9-7x L6-4.2L - Windshield Wiper Motor Replacement (Front) - Mesquite, Texas
For the record, I would like to say that this is the first time I've used a mobile mechanic. Awesome!!!! Alex is very professional and I felt very comfortable dealing with him. He was honest during the whole process and even gave me a quote for an issue I may fix in the near future. I was very satisfied and happy with the whole experience. Great service. Thank you again Alex!

Sedat

21 years of experience
19 reviews
Sedat
21 years of experience
Saab 9-7x V8-5.3L - Serpentine/Drive Belt - Arlington, Texas

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Saab 9-7x V8-5.3L - Oil Pressure Sensor - Indianapolis, Indiana
Very knowledgeable and really knew what he was doing.

Excellent Rating

(27)

Rating Summary
25
2
0
0
0
25
2
0
0
0
Number of Saab 9-7x services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

How a Car's Cooling System Works
Have Have you ever considered the thousands of times explosions occur in your engine? If you're like most people, that thought never enters your mind. Every time a spark plug fires, the fuel and air mixture in that cylinder blows...
How Often Does My Car Need a Radiator Flush?
A A radiator is part of the internal combustion cooling system in a vehicle. It is a form of heat exchanger, designed to transfer heat from the heated coolant mixture as it flows through the vehicle. Radiators operate by pushing...
How to Renew Your Car Registration in Vermont
Every Every state mandates that vehicle owners register their cars. Registration is important for a number of reasons, including paying taxes (buying your tags), for issuing and renewing license plates, for ensuring that drivers complete their emissions testing if needed,...

Cooling fan won't stop running.

Hi there. The cooling system can leak from so many different spots that it can be hard to diagnose. If the problem occurred right after the thermostat and gasket were replaced then the work may not have be performed properly....

My car makes a noise when it's cold

Hi there: This sound could be caused by the actual radiator fan being slightly bent, a drive pulley that's damaged or even the serpentine or drive belt that's wearing out. There are other issues that could be causing this problem,...

My daughters car is making a noise from the back door and when she presses the lock button on the key it goes off

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com