Porsche Macan Clutch pedal goes all the way to the floor Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(24)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(24)

Clutch pedal goes all the way to the floor Inspection Service

How much does a Clutch pedal goes all the way to the floor Inspection cost?

On average, the cost for a Porsche Macan Clutch pedal goes all the way to the floor Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Porsche MacanL4-2.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Porsche MacanV6-3.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Porsche MacanL4-2.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Porsche MacanV6-3.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$119.98 - $138.72
2021 Porsche MacanV6-3.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2017 Porsche MacanL4-2.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2017 Porsche MacanV6-3.0L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2017 Porsche MacanV6-3.6L TurboService typeClutch pedal goes all the way to the floor InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Porsche Macan Clutch pedal goes all the way to the floor Inspection prices

Like your brake pedal, your clutch pedal should have a firm feel when you press it. It should offer resistance as you push it toward the floor, and stop shy of the actual floorboard. When you depress the pedal, you should also be able to change gears. However, if your clutch pedal goes all the way to the floor and you can’t change gears, there’s definitely something wrong. The problem will depend on the type of clutch system in your car.

How this system works:

There are two types of clutch systems used in manual transmission vehicles – cable operated and hydraulic. Cable systems were more common a few years ago, but hydraulic systems have gained in popularity, so there’s a 50/50 chance you’ll have either.

The simplest way to tell is to open the hood and see if you can spot two components on the firewall that look like master cylinders. One is the master cylinder for your brakes, and the other is the clutch master cylinder. If you don’t see two things that look like master cylinders, you have a cable-operated clutch.

If you have a cable-operated clutch, chances are good that the cable has broken (this is very common, and will occur as your car ages unless you take preemptive action and replace the cable before it snaps). The cable runs from the clutch pedal to the clutch assembly itself, and allows you to engage the clutch and change gears.

If you have a hydraulic clutch, the problem is likely with the master or slave cylinder. These work in the same way as your brake hydraulic system. When you press the pedal, it pressurizes the fluid in the system, which then allows you to change gears. If the fluid is low, or the master or slave cylinder has failed, you won’t be able to change gears.

Common reasons for this to happen:

  • Broken Clutch Cable: The most common reason to have a clutch pedal that goes all the way to the floor is a broken clutch cable. This is extremely common, particularly on older cars. Replacing the cable will allow you to engage the clutch and change gears once more.

  • Missing Connector Rod: The clutch cable runs to a throw out fork and bearing. It connects with a small rod. If this rod is missing, the cable won’t attach to the fork and your pedal will go to the floor.

  • Low Fluid: If you have a hydraulic clutch, there are a couple of other things it could be. One is low fluid in the master/slave cylinder. This can be checked by visually inspecting the reservoir. If the fluid is below the “full” line, then you have low fluid.

  • Failed Clutch Master Cylinder: The most common way for a clutch master cylinder to fail is for the internal seals to begin leaking fluid out (meaning that you’ll be low on fluid). This fluid may or may not run onto the clutch pedal, and it may or may not be visible on the firewall or the back of the engine.

  • Failed Slave Cylinder: A failed slave cylinder is less common than a failed master cylinder, but the symptoms (and causes) are generally the same. Seals break down and begin leaking, leading to low fluid levels in the system.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the clutch pedal, the cable or hydraulic system to verify operation and determine the actual cause of the problem. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first inspect the clutch pedal, as well as its connection to either the clutch cable or the master cylinder. The mechanic will check the fluid level in the reservoir if this is a hydraulic system, as well as inspecting for leaks.

How important is this service?

If your clutch pedal goes to the floor, you won’t be able to engage the clutch, and you won’t be able to shift gears. In short, you’ll be stuck. Driving without an operable clutch cable is not recommended. One of our professional mechanics can inspect and repair your clutch system.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(24)

Rating Summary
22
1
0
0
1
22
1
0
0
1

James

31 years of experience
690 reviews
James
31 years of experience
Porsche Macan V6-3.0L Turbo - Oil Change - Long Beach, California
James was amazing! It was my first time using this platform for this. He was really nice and fixed everything flawless! Highly recommend 

Shawn

12 years of experience
287 reviews
Shawn
12 years of experience
Porsche Macan V6-3.0L Turbo - Oil Change - Phoenixville, Pennsylvania
Amazing service! Wonderful mechanic and a friendly face. I’m glad Shawn worked on my car and I trust him with everything car-related from now on.

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Porsche Macan V6-3.0L Turbo - Brake Pads Replacement (Rear) - San Jose, California
Robert showed up right on time and took care of the repair in my driveway, extremely convenient.

Anderson

27 years of experience
91 reviews
Anderson
27 years of experience
Porsche Macan V6-3.0L Turbo - Spark Plugs - Brooklyn, New York
Anderson was knowledgeable, efficient and friendly. I would like to use him again.

Excellent Rating

(24)

Rating Summary
22
1
0
0
1
22
1
0
0
1
Number of Porsche Macan services completed
264+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

Should I Lift Up My Wiper Blades Before a Snowstorm?
It's a good idea to lift up your car wiper blades before it snows. If you don't, you could get a burnt out window wiper motor or bent wiper arms.
Symptoms of a Bad or Failing AC Receiver Dryer
If you see signs of refrigerant leakage, hear rattling noises, or smell mold coming from the AC, you may have to replace the AC receiver dryer.
Signs You Need New Car Tires
Car tires can leak, wear unevenly, and lose contact with the road, all of which make driving unsafe. Rotate your car tires and inspect them regularly.

A click is heard, lights flash, and engine shuts down

Hello. The symptoms you are describing can be caused by a few different issues. The first thing I would check is to see if the battery is in good condition, properly charged, and able to pass a load test. I...

P0126 - check engine code

It is quite possible the code was set as an intermittent problem. The thermostat may have been stuck at one point, freed up and began working again, and then allowed the light to go off. Most computer controlled engine systems...

I am 3 hours out of town, can I drive my car home to my mechanic?

Yes, you should not have any problem driving home. The RSC light indicates that there may be an issue with the "roll stability control" which is related to the traction control system in your vehicle. The traction control system (https://www.yourmechanic.com/services/traction-control-light-is-on-inspection)...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com