Oldsmobile Delta 88 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Oldsmobile Delta 88 Fuel Injector Replacement is $674 with $478 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Oldsmobile Delta 88V6-3.8LService typeFuel Injector ReplacementEstimate$1777.16Shop/Dealer Price$2161.70 - $3301.53
1991 Oldsmobile Delta 88V6-3.8LService typeFuel Injector ReplacementEstimate$1761.84Shop/Dealer Price$2143.38 - $3280.96
Show example Oldsmobile Delta 88 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(12)

Rating Summary
11
0
0
1
0
11
0
0
1
0

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Oldsmobile Delta 88 V8-5.7L - Thermostat Housing Gasket - Torrance, California
Extremely knowledgeable and conscientious. Makes sure the job gets done right!

Juan

11 years of experience
216 reviews
Juan
11 years of experience
Oldsmobile Delta 88 V8-5.7L - Car is not starting - Torrance, California
Juan quickly and methodically identified the issue.

Joel

22 years of experience
987 reviews
Joel
22 years of experience
Oldsmobile Delta 88 V6-3.8L - Mass Airflow Sensor - Atlantic Beach, Florida
Very prompt, friendly, courteous and knowledgeable. This is my sons first car and he was clueless. Joel put him at ease. We will definitely ask for him in the future should the need arise.

Hugh

12 years of experience
159 reviews
Hugh
12 years of experience
Oldsmobile Delta 88 V6-3.8L - Battery - Littleton, Colorado
Conscientious, considerate and knowledgeable. Performed the work well and saved me money from unnecessary things I thought I needed. “Sometimes we get lucky”, he said. Highly recommended.

Excellent Rating

(12)

Rating Summary
11
0
0
1
0
11
0
0
1
0
Number of Oldsmobile Delta 88 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P2425 OBD-II Trouble Code: Exhaust Gas Recirculation Cooling Valve Control Circuit Open
P2425 P2425 code definition Exhaust Gas Recirculation Cooling Valve Control Circuit Open What the P2425 code means P2425 is an OBD-II generic code that the engine control module (ECM) detected the engine exhaust gas recirculation cooling bypass valve (EGRCBV) control...
Rules of the Road For Vermont Drivers
Are Are you a lifetime Vermonter, or have you just moved to the freedom and unity state? Whatever the case may be, if you’re doing any driving in Vermont, you should be familiar with the rules of the road, so...
Ohio Speed Limits, Laws, and Fines
Following Following is an overview of the laws, limits, and fines as they relate to speeding traffic violations in the state of Ohio. Speed limits in Ohio Ohio is the only state east of the Mississippi that permits a 70...

Won't shift out of second gear - 2000 GMC Sierra 2500

Hello. This definitely sounds like an electronic transmission control issue. It could be something as simple as a transmission range selection switch (https://www.yourmechanic.com/services/transmission-position-sensor-switch-replacement) or something as serious as a transmission valve body. You may want to consult with a transmission...

Smoking and smell of antifreeze

If you engine just started to pour white smoke out the exhaust then most likely you just blew your head gasket. It could be from overheating or corrosion inside engine caused the head to leak coolant into the cylinders and...

My car has a high pitch chirping sound when accelerating. 2010 Subaru Impreza

Hi - your Impreza has a turbocharged engine for enhanced performance. This produces pressurized air for the engine, increasing power. To avoid over-pressurizing the engine, there are boost pressure controls, and a "waste gate (https://www.yourmechanic.com/question/how-necessary-is-it-to-repair-the-wastegate-by-chancey-w)" port to vent over-pressure -...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com