Oldsmobile Delta 88 Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(11)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(11)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Oldsmobile Delta 88 Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1986 Oldsmobile Delta 88V6-3.0LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1982 Oldsmobile Delta 88V8-5.7L DieselService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1971 Oldsmobile Delta 88V8-5.7LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1978 Oldsmobile Delta 88V8-5.7L DieselService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1973 Oldsmobile Delta 88V8-7.5LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1987 Oldsmobile Delta 88V6-3.8LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1983 Oldsmobile Delta 88V8-5.7L DieselService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1979 Oldsmobile Delta 88V8-4.9LService typeCar is not getting enough power InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Oldsmobile Delta 88 Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(11)

Rating Summary
10
0
0
1
0
10
0
0
1
0

Kenneth

20 years of experience
792 reviews
Kenneth
20 years of experience
Oldsmobile Delta 88 V8-5.7L - Thermostat Housing Gasket - Torrance, California
Extremely knowledgeable and conscientious. Makes sure the job gets done right!

Daniel

9 years of experience
51 reviews
Daniel
9 years of experience
Oldsmobile Delta 88 V8-5.7L - Starter - Henderson, Nevada
DANIEL IS ABSOULUTELY THE BEST PROFESSIONAL AND RESPECTFUL . COURTEOUS INDIVIDUAL THAT I HAVE MET !!!! HIS DEMEANOR IS UNHEARD OF REGARDING AUTO MECHANICS THAT I HAVE EVER DEALT WITH . THEY USUALLY HAVE NASTY , SHITTY , CONDENCENDING ATTITUDES , AND ARE GENERALLY SCUMBAG ASSHOLES . HIS WORK ON MY VEHICLE WAS PERFECT AND 100 % SATISFACTORY . I HOPE TO GET DANIEL AGAIN THE NEXT TIME I USE YOUR SERVICE . I ALSO HOPE THAT IF I DO NOT , THE NEXT TIME SOON , THERE IS A PERSON LIKE HIM . HOWEVER , I PLAN ON USING ON ALWAYS USING DANIEL , THROUGH YOUR COMPANY . WHAT A GREAT PERSON !!!!!

Juan

10 years of experience
216 reviews
Juan
10 years of experience
Oldsmobile Delta 88 V8-5.7L - Car is not starting - Torrance, California
Juan quickly and methodically identified the issue.

Chris

22 years of experience
2247 reviews
Chris
22 years of experience
Oldsmobile Delta 88 V6-3.8L - Ignition Lock Assembly - Laguna Hills, California
Great mechanic with a pleasant attitude.............he definitely knows his business!!

Excellent Rating

(11)

Rating Summary
10
0
0
1
0
10
0
0
1
0
Number of Oldsmobile Delta 88 services completed
121+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does an Ignition Coil Last?
The combustion process that happens when your car is cranked is vital in order to get the car moving. In order for...
P0606 OBD-II Trouble Code: PCM Processor Fault
P0606 code definition PCM Processor Fault What the P0606 code means The Powertrain Control Module is sometimes referred to as the Power...
P0835 OBD-II Trouble Code: Clutch Pedal Switch B Circuit High
P0835 means there is an issue with the clutch position sensor circuit, possibly due to a defective or misadjusted sensor, or faulty wiring.

Truck has a problem idling. 1996 dodge ram 1500.

There could be an issue with the clutch pressure plate springs. One or more of the springs may be damaged causing the pressure plate to apply at an angle making the clutch assembly lock up with the transmission input shaft...

Honda 2005. 200,000 miles. told the catilytic converter needs to be changed. does the manifold need to be changed also? Honda dealer quoted 1119.00. is that reasonable, and should i just buy the part and have a regular garage install?

2007 Nissan Maxima · SE Sedan 4D

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com