Oldsmobile Cutlass Supreme Valve Cover Gasket Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Valve Cover Gasket Replacement Service

How much does a Valve Cover Gasket Replacement cost?

On average, the cost for a Oldsmobile Cutlass Supreme Valve Cover Gasket Replacement is $171 with $31 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
1993 Oldsmobile Cutlass SupremeV6-3.4L	Service typeValve Cover Gasket Replacement	Estimate$812.68	Shop/Dealer Price$892.83 - $1104.91
1996 Oldsmobile Cutlass SupremeV6-3.1L	Service typeValve Cover Gasket Replacement	Estimate$815.93	Shop/Dealer Price$912.45 - $1189.24
1997 Oldsmobile Cutlass SupremeV6-3.1L	Service typeValve Cover Gasket Replacement	Estimate$815.93	Shop/Dealer Price$912.53 - $1189.38
1996 Oldsmobile Cutlass SupremeV6-3.4L	Service typeValve Cover Gasket Replacement	Estimate$878.29	Shop/Dealer Price$976.62 - $1256.98
1995 Oldsmobile Cutlass SupremeV6-3.1L	Service typeValve Cover Gasket Replacement	Estimate$815.93	Shop/Dealer Price$917.10 - $1197.36
1991 Oldsmobile Cutlass SupremeV6-3.4L	Service typeValve Cover Gasket Replacement	Estimate$592.34	Shop/Dealer Price$667.98 - $885.44
1991 Oldsmobile Cutlass SupremeL4-2.3L	Service typeValve Cover Gasket Replacement	Estimate$1231.59	Shop/Dealer Price$1310.97 - $1521.29
1990 Oldsmobile Cutlass SupremeV6-3.1L	Service typeValve Cover Gasket Replacement	Estimate$647.83	Shop/Dealer Price$712.80 - $895.99

Show example Oldsmobile Cutlass Supreme Valve Cover Gasket Replacement prices

What is a valve cover gasket and how does it work?

Each cylinder head on your car’s engine has an aluminum or plastic valve cover bolted to it. Between this valve cover and the cylinder head, there is a gasket that keeps engine oil from leaking out. The valve cover bolts keep the gasket compressed, thus preventing leaks. Over time the gasket becomes brittle from the engine’s heat or the bolts loosen, creating an engine oil leak.

When to consider replacing a valve cover gasket?

Look for these signs of oil leakage at the valve cover gasket:

Oil seepage or dripping. Should the joint between the valve cover and the cylinder head fail, oil often becomes visible on the valve cover or cylinder heads. Usually, the oil will attract and hold dirt.
Oil accumulating inside the spark plug well. The spark plug tube seals are part of the valve cover sealing system. If the tube seals are leaking, you will see oil on the spark plugs or wires. The valve cover gasket and tube seals are all replaced at one time if either fails.
Oil leakage at the rubber grommets. The bolts holding the valve cover to the cylinder head sometimes have rubber grommet seals under the bolt heads. If these seals are leaking, you will see oil seepage around the bolt heads.

How do mechanics replace a valve cover gasket?

Remove engine cover. Some engines have plastic covers over the entire top. The plastic engine cover is removed to access the valve cover(s).
Remove components. On 4 cylinder engines, the valve cover is usually readily accessed once any electrical components and emission control tubing are removed, plus any accelerator linkages that might be in the way. On 6 or 8 cylinder engines, depending on which valve cover gasket is leaking, removal of the air intake plenum might be required, as well as additional steps.
Remove valve cover. Once the valve cover(s) is accessed, the cover retaining bolts are removed and the cover pulled off. The valve cover sealing surface is checked with a straight edge to be sure the cover is flat and thus reusable.
Install new gasket. The new valve cover gasket is applied along with new rubber grommets under the retaining bolt heads. If there are spark plug tube seals, these are replaced as well. In some applications, oil resistant RTV (room temperature vulcanization) sealant must be applied to specific segments of the sealing surface, along with the new gasket, to ensure a complete and effective seal. The cover is bolted back on, using a calibrated inch pound torque wrench, and all other components are restored to their original position.
Check for leaks. Finally, the car engine is run and a visual check is made for oil leaks.

Is it safe to drive with a valve cover gasket problem?

Yes, as long as the amount of oil leaking is small, and there is no leak onto hot engine parts such as the exhaust manifold, it is safe to drive your car until you have an opportunity to fix it.

If you notice oil leaking on to the ground beneath your car after it is parked, you do not have a small leak, and it needs to be found and repaired as soon as possible. Any leak, of course, means your oil level is dropping as you drive the car. If you have a leak, be sure to check your oil more frequently than usual so you do not run low on oil and damage the engine.

When replacing a valve cover gasket keep in mind:

The mechanical components of a car engine will typically outlive the gaskets used to seal the engine. However, many of these gaskets, including the valve cover gaskets, are relatively easy to replace.
Never add stop leak type products to engine oil or other vehicle fluids. Not only are these materials not approved or specified by the original equipment manufacturers, but they also can create additional problems that may be costly to repair.
Often, if a car is old enough to have a valve cover oil leak, there will be oil leaks elsewhere on the engine, so you should request a complete leak inspection. It may be more cost effective to repair multiple leaks during one service call.
Often, the PCV (Positive Crankcase Ventilation) valve is inserted into a rubber grommet in one of the valve covers. An old rubber grommet is a potential leak source, as well as connections to the PCV valve. These components should be inspected and considered for replacement while there is access to the valve cover.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(44)

Rating Summary

38

3

0

0

3

38

3

0

0

3

SEE REVIEWS NEAR ME

Jerry

31 years of experience

48 reviews

Jerry

31 years of experience

by Joanne

Oldsmobile Cutlass Supreme V6-3.4L - Car is not starting - Las Vegas, Nevada

Jerry was great and very knowledgeable with my cars engine since it old and he knows the engine well

Alvin

16 years of experience

22 reviews

Alvin

16 years of experience

by Chris

Oldsmobile Cutlass Supreme V6-3.1L - Battery - Towson, Maryland

He was on time, friendly and took care of the problem in a professional manner

Choeun

16 years of experience

181 reviews

Choeun

16 years of experience

by Colin

Oldsmobile Cutlass Supreme V6-3.1L - Thermostat - Modesto, California

For something as scary as auto repair it was very plesant and choeun was extremely professional about it. What turned out to be a simple thermostat replacement ended up being a fix to my throttle body cable, which was on its last few strands. He helped me temporaily repair it for free. Going to use him again for my repairs. Best part was being able to be home while he did all the work in my garage.

Joseph

28 years of experience

578 reviews

Joseph

28 years of experience

by Lamont

Oldsmobile Cutlass Supreme V6-3.1L - Starter - Spring, Texas

Arrived early and finished way faster than expected

Excellent Rating

(44)

Rating Summary

38

3

0

0

3

38

3

0

0

3

SEE REVIEWS NEAR ME

Recent articles & questions

How to Maintain Automotive Power Tools

Automotive technicians take care of power tools to save money. Check for dirt and debris and change filters and oil regularly to maintain longevity.

B1280 OBD-II Trouble Code: Servo Motor Potentiometer Coolair Circuit Failure

B1280 means there is an error with the servo motor potentiometer coolair circuit, likely due to a faulty potentiometer or defective servo motor.

The Guide to Legal Car Modifications in Kansas

ARENA Creative / Shutterstock.com If you already live in Kansas and want to customize your vehicle, or you have a car or truck that is already modified and are moving to the state, you need to know...

Put my GMC into gear and when I give it gas it just wines and won't move.

Hi there. Check the clutch to see if it is slipping. When a clutch slips, the engine will continue to operate but the transmission will not drive under a load. If the clutch is new and the noise is still...

A/C pressure is high on both sides after compressor, condenser, accumulator, orifice change

Hi there. In general, high pressure on both high and low pressure AC sides is typically caused by an obstruction in the evaporator. In some cases, this can be a simple debris that can be cleaned if removed, while in...

engine codes

Hi Jonathan. Thanks for sending your question today. The code that is easier to identify is the P-0740 issue. What the P0740 code means is that the powertrain control module (PCM) has detected something unusual within the torque converter clutch...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com