Oldsmobile Achieva Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Oldsmobile Achieva Power Steering Pressure Hose Replacement is $273 with $91 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Oldsmobile AchievaV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$842.88Shop/Dealer Price$1004.39 - $1477.58
1993 Oldsmobile AchievaL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$579.45Shop/Dealer Price$675.78 - $959.00
1992 Oldsmobile AchievaV6-3.3LService typePower Steering Pressure Hose ReplacementEstimate$815.67Shop/Dealer Price$974.55 - $1445.78
1996 Oldsmobile AchievaV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$412.15Shop/Dealer Price$466.69 - $624.46
1996 Oldsmobile AchievaL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$460.51Shop/Dealer Price$529.20 - $724.79
1995 Oldsmobile AchievaL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$395.29Shop/Dealer Price$445.81 - $591.08
1995 Oldsmobile AchievaV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$412.15Shop/Dealer Price$466.71 - $624.50
1997 Oldsmobile AchievaL4-2.4LService typePower Steering Pressure Hose ReplacementEstimate$460.51Shop/Dealer Price$527.14 - $721.18
Show example Oldsmobile Achieva Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(6)

Rating Summary
4
0
1
0
1
4
0
1
0
1

Manuel

42 years of experience
132 reviews
Manuel
42 years of experience
Oldsmobile Achieva L4-2.4L - Inspection / Diagnostics - San Antonio, Texas
I never called for a mobile mechanic before until I found this website, was rather skeptical at first but because my car couldn't drive at all I became desperate. My mechanic Manuel arrived a bit early unexpectedly, which is good, and he knew the problem with no hassel along with the recommended parts I would need to fix my car. Because of him I can fully trust in YourMechanic.com to find out what is wrong with my car and knowing how to fix it at a fair price, and never feel uncomfortable with their mechanics ever again.

Ryan

19 years of experience
62 reviews
Ryan
19 years of experience
Oldsmobile Achieva L4-2.4L - Car is not starting - Ogden, Utah
Seemed to definitely know what he was talking about. Was right on time. Really friendly.

Tyrone

20 years of experience
105 reviews
Tyrone
20 years of experience
Oldsmobile Achieva L4-2.4L - Oil Change - Houston, Texas
It was a highly enjoysble experience with a young man who is personable, a gigted mechanic, and a true professional!!!

Ricardo

24 years of experience
199 reviews
Ricardo
24 years of experience
Oldsmobile Achieva V6-3.1L - Blower Motor Relay - Miami, Florida
Always punctual, knowledgeable, patient with all of my questions. He does a great job. I will continue to book him for any future repairs to my car.

Excellent Rating

(6)

Rating Summary
4
0
1
0
1
4
0
1
0
1
Number of Oldsmobile Achieva services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

What Does it Mean for a Car to be Reliable?
We We live in really stressful times. Domestically, there is uncertainty about our political future, and overseas can be a dangerous place to travel. In times like these, it’s natural for people to gravitate toward things that are reliable and...
P2620 OBD-II Trouble Code: Throttle Position Output Circuit Open
P2620 P2620 code definition Throttle Position Output Circuit Open What the P2620 code means P2620 is an OBD-II code for the engine control module (ECM) detecting the throttle position closed output circuit is open and cannot detect a closed throttle....
How an Automotive College Degree Benefits Your Car Mechanic Career
Attending an automotive college program opens many doors for car mechanics, including career growth and higher pay as you become a better technician.

key problem

It sounds like when the drive shaft broke it may have damaged the transmission linkage and is not letting the transmission go all the way to Park. This will prevent the key from turning to the locked position. If you...

High pitched whine noise is coming from behind or below glove box area. The noise occurs at low rpm at any speed, especially while turning left.

Hi there. The sound that you are hearing is probably from the blower motor to the heater / air conditioning evaporator. Remove the fuse to the blower motor and see if the sound stops. If the sound stops, then the...

Cost for to replace the rear camshaft seal.

Billing question sent to CS for the cost of replacing the camshaft seal on a 2005 Kia Amanti with a V6-3.5L engine.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com