Nissan NX Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,239)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,239)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Nissan NX Brake Pad Replacement is $221 with $81 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Nissan NXL4-2.0LService typeBrake Pads - Front ReplacementEstimate$390.28Shop/Dealer Price$452.70 - $631.86
1992 Nissan NXL4-1.6LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.22 - $471.44
1992 Nissan NXL4-1.6LService typeBrake Pads - Rear ReplacementEstimate$381.27Shop/Dealer Price$441.95 - $619.80
1991 Nissan NXL4-2.0LService typeBrake Pads - Rear ReplacementEstimate$381.27Shop/Dealer Price$441.95 - $619.80
1993 Nissan NXL4-1.6LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$350.72 - $474.06
1993 Nissan NXL4-1.6LService typeBrake Pads - Rear ReplacementEstimate$381.27Shop/Dealer Price$442.09 - $620.05
1991 Nissan NXL4-1.6LService typeBrake Pads - Front ReplacementEstimate$307.11Shop/Dealer Price$349.26 - $471.51
1991 Nissan NXL4-2.0LService typeBrake Pads - Front ReplacementEstimate$381.27Shop/Dealer Price$441.95 - $619.80
Show example Nissan NX Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(1,239)

Rating Summary
1,193
30
5
0
11
1,193
30
5
0
11

Joshua

28 years of experience
709 reviews
Joshua
28 years of experience
Nissan NX L4-2.0L - My car will not shift from reverse to first gear. My gears are stuck. (Inspection) - Pinole, California
Joshua was professional. Came a few minutes early and introduced himself. Very helpful and gave me a great idea as to what was going on with my car. I'm very pleased with the results. Thanks again. I will be using using your services in the future. :)

Shane

18 years of experience
379 reviews
Shane
18 years of experience
Nissan Rogue Sport L4-2.0L - Brake Pads Replacement (Front, Rear) - Austin, Texas
Shane did an excellent job with my car. Her was very friendly and professional. I Will definitely be using him again.

Kevin

7 years of experience
111 reviews
Kevin
7 years of experience
Nissan Altima L4-2.5L - Brake Pads Replacement (Front, Rear) - Kissimmee, Florida
Kevin was absolutely fantastic! Professional, knowledgeable, and honest. Will definitely request him again.

Charles

18 years of experience
176 reviews
Charles
18 years of experience
Nissan Altima L4-2.5L - Brake Pads Replacement (Rear) - Rockville, Maryland
On time , knowledgeable and a nice person :) . Excellent service experience.

Excellent Rating

(1,239)

Rating Summary
1,193
30
5
0
11
1,193
30
5
0
11
Number of Nissan Brake Pad Replacement services completed
13629+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Choose a Lift for Your Jeep Wrangler
The The Jeep Wrangler (https://www.yourmechanic.com/article/a-buyer-s-guide-to-the-2012-jeep-wrangler) is easily the most off-road oriented vehicle you can buy from a dealership. All Jeep Wranglers come with four-wheel drive and a removable top. Their high ground clearance and short wheelbase allow them to navigate...
P2139 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch D / F Voltage Correlation
P2139 P2139 code definition Throttle/Pedal Position Sensor/Switch D / F Voltage Correlation What the P2139 code means The P2139 code means that an improper voltage correlation between the throttle and pedal position sensors has caused the throttle plate to become...
P0141 OBD-II Trouble Code: O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2)
P0141 code definition O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2) What the P0141 code means P0141 is the OBD-II generic...

I was having radiator problems. I installed a new radiator and car ran hot while driving. Engine stopped running and turns over but will not start.

Hi there. The issue could be a sticking thermostat, a water pump failing, or a blown head gasket that could be causing the engine to overheat and make the engine not start up after it overheats. Sent billing question to...

Bank 1 air fuel imbalance alarm car is misfire after it gets hot ok up till that time

Hi there. Check the spark plugs and see if the plugs have a good bold spark. If the plugs are not sparking, then either the plugs are fouled out or the ignition coils are not energizing. Check the fuel injectors...

I have a 2006 Nissan [Frontier](/topics-frontier/). When it is in park it’s starts idling up and down for no reason. Why?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com