Nissan NV3500 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(10)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(10)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Nissan NV3500 Wheel Bearings Replacement is $415 with $261 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Nissan NV3500V8-5.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$912.76Shop/Dealer Price$1084.71 - $1587.60
2016 Nissan NV3500V8-5.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$898.34Shop/Dealer Price$1067.47 - $1568.24
2013 Nissan NV3500V6-4.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$898.34Shop/Dealer Price$1067.51 - $1568.31
2015 Nissan NV3500V6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$898.34Shop/Dealer Price$1067.51 - $1568.31
2017 Nissan NV3500V8-5.6LService typeWheel Bearings - Driver Side Front ReplacementEstimate$914.54Shop/Dealer Price$1090.11 - $1604.83
2017 Nissan NV3500V6-4.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$914.54Shop/Dealer Price$1087.98 - $1601.10
2016 Nissan NV3500V6-4.0LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$898.34Shop/Dealer Price$1067.53 - $1568.35
2017 Nissan NV3500V6-4.0LService typeWheel Bearings - Driver Side Front ReplacementEstimate$914.54Shop/Dealer Price$1087.76 - $1600.71
Show example Nissan NV3500 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(10)

Rating Summary
9
0
1
0
0
9
0
1
0
0

David

17 years of experience
639 reviews
David
17 years of experience
Nissan NV3500 V8-5.6L - Oil Change - American Canyon, California
Very professional, quick and friendly. I always appreciate David’s service.

Jason

16 years of experience
344 reviews
Jason
16 years of experience
Nissan NV3500 V8-5.6L - Door Mirror Replacement (Driver Side) - New York, New York
Jason was on time, patient, and thorough. An excellent mechanic. Have already scheduled my next appointment!

Greg

23 years of experience
624 reviews
Greg
23 years of experience
Nissan NV3500 V8-5.6L - Brake Pads Replacement (Front, Rear) - Phoenix, Arizona
Greg did a fantastic Job and talk to me through the entire process. He made sure I understood what he was doing and why he was doing it as well as checking over the rest of the vehicle to ensure it works properly.

Simon

28 years of experience
378 reviews
Simon
28 years of experience
Nissan NV3500 V8-5.6L - Oil Change - Washington, District of Columbia
Biggest problem was technian Being late.

Excellent Rating

(10)

Rating Summary
9
0
1
0
0
9
0
1
0
0
Number of Nissan NV3500 services completed
110+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

How to Rebuild a Car Engine
Whether Whether it is to breathe new life into a commuter or work vehicle, or for hobby in a classic car, there are many cases in which rebuilding an engine can be a great alternative to replacing one. Generally speaking,...
How to Get Smog Technician Certified in Nevada
Automotive technician jobs include smog certified emissions inspectors. In Nevada, you need to attend class and training to become an inspector.
How to Replace a Washer Fluid Level Switch
The washer fluid level switch fails when the Windshield Fluid Warning Light stays illuminated or there are unusual noises coming from the washer pump.

I cannot get my bluetooth to work

Hello, having a convenience feature not working properly can be annoying, especially when it has to do with the entertainment system. It appears that Mazda has recognized this issue in Technical Service Bulletin (TSB 09-008/15) to resolve issues with the...

Parking sensor causing false beeps

Is the sensor totally pushed in and hanging by the wires or pushed in a little? Either way you have to determine which parts are damaged: the sensor itself, the bezel for it or the bumper. The sensor and bezel...

Hi, I have a 2014 Chevy Equinox and one windshield wiper works and one does not. Unfortunaley, it is the driver side that doesn't work and I got caught in a bad rain storm the other day.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com