Nissan ARIYA Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(12,593)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(12,593)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Nissan ARIYA Uneven tire wear Inspection is $146 with $0 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
* Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
* Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
* Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$145.99Shop/Dealer Price$147.85 - $149.24
* Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$145.99Shop/Dealer Price$149.32 - $151.82
2023 Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$145.99Shop/Dealer Price$147.85 - $149.24
2024 Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$145.99Shop/Dealer Price$147.41 - $148.48
* Nissan ARIYAElectricService typeUneven tire wear InspectionEstimate$145.99Shop/Dealer Price$147.44 - $148.52
Show example Nissan ARIYA Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(12,593)

Rating Summary
11,809
407
90
60
227
11,809
407
90
60
227

Godwin

25 years of experience
253 reviews
Godwin
25 years of experience
Nissan Murano V6-3.5L - Uneven tire wear - Chino Hills, California
Very efficient and friendly

Robert

19 years of experience
18 reviews
Robert
19 years of experience
Nissan Murano V6-3.5L - Brake Rotor/Disc Replacement (Front) - Atlanta, Georgia
Robert was great. He was personable and knowledgeable. I would definitely use him again.

H

27 years of experience
828 reviews
H
27 years of experience
Nissan Xterra V6-4.0L - Brake System Flush - Sunnyvale, California
He did a good work for the brake flush job, but a wheel stud and a lug nut were stripped during re-installation of a rear wheel.

Justin

9 years of experience
372 reviews
Justin
9 years of experience
Nissan Altima L4-2.5L - Battery - Pompano Beach, Florida
Justin was very professional and answered all my questions.

Excellent Rating

(12,593)

Rating Summary
11,809
407
90
60
227
11,809
407
90
60
227
Number of Nissan services completed
138523+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mini Cooper Coupe
The The 2012 Mini Cooper Coupe has a distinctive style that offers an agile and fast ride to its passengers. The goal with the Coupe is to provide buyers with an alternative to the Porsche Cayman, Audi TT Coupe, and...
Symptoms of Bad or Failing Stabilizer Bar Bushings
Common signs include sluggish response in vehicle handling and rattling or squeaking noises from underneath the car.
P0291OBD-II Trouble Code: Cylinder 11 Injector Circuit Low
P0291 P0291 code definition When your vehicle’s PCM registers the P0291 code, it means that a voltage reading came from the fuel injector circuit – for cylinder number 11’s fuel injector – that doesn’t conform to the predetermined value referenced...

Engine temperature shows overheating

If your heater is not blowing hot air, the heater core may be clogged. The heater core is part of the cooling system loop. If coolant is not flowing into it, you will not get hot air but more importantly,...

whats the best way to clean the throttlebody?

Hello. The best way to clean the throttle is to remove it from the vehicle. Find a throttle body or MAF cleaning product of your choice and use the nozzle that comes with it. When taking the steps to remove...

Died while driving cranks but won't start what could it be?

Hello. Typically when you have these symptoms you want to focus on air, fuel and spark. If you already replaced the ignition coil, and know you are getting spark to the plugs, turn your attention to the fuel system. You...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com