Mitsubishi Eclipse Cross Brake Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,955)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,955)

Brake Hose Replacement Service

How much does a Brake Hose Replacement cost?

On average, the cost for a Mitsubishi Eclipse Cross Brake Hose Replacement is $259 with $107 for parts and $152 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Hose - Driver Side Rear ReplacementEstimate$397.14Shop/Dealer Price$466.44 - $638.31
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Hose - Passenger Side Front ReplacementEstimate$412.64Shop/Dealer Price$486.97 - $662.62
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Hose - Driver Side Front ReplacementEstimate$412.64Shop/Dealer Price$486.97 - $662.61
2018 Mitsubishi Eclipse CrossL4-1.5L TurboService typeBrake Hose - Passenger Side Rear ReplacementEstimate$365.14Shop/Dealer Price$434.43 - $606.29
Show example Mitsubishi Eclipse Cross Brake Hose Replacement prices

What is the brake hose and how does it work?

The hydraulic steel brake lines that carry brake fluid in your car are bolted to the frame of the vehicle. These metal brake lines must eventually attach to the individual wheel calipers — or wheel cylinders in the case of drum brakes — at all four wheels. Since the wheels constantly move up and down, or left and right in the case of the front wheels, the brake line that attaches to the individual wheel calipers must be highly flexible. Enter the brake hose: a flexible, synthetic, reinforced-rubber hose designed to withstand the 1,000 PSI plus pressures that occur when you apply the brakes. There is at least one brake hose at each wheel position, and sometimes two depending on the suspension design. At the end of each rubber hose are steel connections with seals to maintain a leak-proof connection.

Brake Hoses

When to consider replacing the brake hose:

  • Physical damage. If there are cuts, cracks, abrasions, bulging, or excessive rust at the hose fitting ends, the hose should be replaced.
  • Leaks. Seepage at hose fittings, or leaks anywhere along the hose, requires replacement. If there is a leak, or the hose is bulging, you may notice that the brake pedal is lower than usual or spongy.
  • Internal hose failure. Occasionally, the lining on the interior of the hose can separate, blocking the flow of hydraulic fluid. This is diagnosed using test gauges. A fluid blockage that prevents the brakes from releasing may manifest itself as dragging brakes or overheated brakes.
  • End of Lifetime. Although many brake hoses can last 20 plus years if well-made out of quality materials, after 10 years of service it is best to replace the hoses with new ones for maximum reliability and safety.

How do mechanics replace the brake hose?

  • The vehicle is jacked up and safely supported with steel jack stands.
  • The wheel and tire assembly are removed.
  • A pan is put in place to catch brake fluid.
  • Residual pressure in the brake line is relieved by momentarily opening the brake caliper bleeder screw.
  • Each hose end is detached. At the caliper, the attachment is often a banjo style bolt with one-time-use copper washers. The attachment at the vehicle frame is typically a flare connection, so a tube nut must be loosened. Once both ends are detached, the hose is removed.
  • The new hose is installed using new copper-sealing washers and the factory OEM torque on the tube nut and the banjo bolt.
  • Finally, the brake system is bled to remove all air and the vehicle is road tested. A final check for leaks is performed after the road test.

Is it safe to drive with a brake hose problem?

No. Properly working brakes are always essential. If you suspect damage to the brake hoses or see leaks it is a good idea to have a professional evaluate your car’s brakes.

When replacing a brake hose keep in mind:

  • If a brake hose is replaced due to aging, the mechanic will check all of the other brake hoses as they may be worn or defective as well.
  • Some vehicles have flexible, braided stainless steel brake hoses, or other specially designed hoses. If your car does not have ordinary synthetic rubber hoses, a mechanic will let you know what type of new brake hose you have and what your replacement options are.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mitsubishi mechanics

Real customer reviews from Mitsubishi owners like you.

Excellent Rating

(1,955)

Rating Summary
1,828
72
15
13
27
1,828
72
15
13
27

Tyrone

11 years of experience
423 reviews
Tyrone
11 years of experience
Mitsubishi Galant L4-2.4L - Brake Hose Replacement (Driver Side Front) - Temple Hills, Maryland
Great work, didnt take long and explained stuff to me that I could understand.

Andrew

11 years of experience
857 reviews
Andrew
11 years of experience
Mitsubishi Lancer L4-2.0L - Brake Hose Replacement (Driver Side Front) - Shawnee Mission, Kansas
He goes above and beyond to get the job done right would recommend to my friends and do

John

24 years of experience
55 reviews
John
24 years of experience
Mitsubishi Galant L4-2.4L - Window Motor / Regulator Assembly Replacement (Passenger Side Front) - Woodbury, New Jersey
I am glad that I found this service, there were a few bumps, especially in relation to long hold times to reach someone in customer service, also there was a service that wasn't covered that caused alot of confusion - but overall I would definitely use your mechanic again.

Carlos

16 years of experience
362 reviews
Carlos
16 years of experience
Mitsubishi Galant L4-2.4L - Car is not starting - Bedford, Texas
Carlos was great! He showed up early, and although he fixed my car within the first 10 minutes he stuck around and gave me a complete overview of what kind of condition my car was in. He also gave me tips on how to maintain my car in good working order. Carlos went above and beyond and I would gladly recommend his services to anyone!

Excellent Rating

(1,955)

Rating Summary
1,828
72
15
13
27
1,828
72
15
13
27
Number of Mitsubishi services completed
21505+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mitsubishi MECHANICS
700+
experts on our platform

Recent articles & questions

How Long Does a Steering Rack/Gearbox Last?
When When you turn the steering wheel, the two front wheels also turn in the direction you want. It actually takes a lot of different components to translate the rotational movement of the steering wheel into side to side movement...
Child Seat Safety Laws in Hawaii
Hawaii, Hawaii, like other states, has regulations in place for seat belts, and other security. Adults are expected to use their seat belts, and they are also expected to look after children who occupy their motor vehicles. Children cannot be...
P0310 OBD-II Trouble Code: Cylinder 10 Misfire Detected
P0310 P0310 Code Definition The P0310 code is a generic powertrain code related to the ignition system or misfire. In this case, a misfire has been detected specifically in cylinder number 10. Codes related to the P0310 include: P0300: Random/Multiple...

How do i unbolt the, what looks like an, ac condenser from the radiator so i can remove the radiator.

The A/C condenser is removed from the radiator after you remove fans, transmission cooler lines, and hose connections. Tilt the radiator back and disconnect the lock bolt on top center of the radiator that locks the condenser to the radiator,...

My car was smoking on the driver side no leaks on the ground and it's not over heating

Hello. The best thing to do is visually inspect where the smoke (https://www.yourmechanic.com/services/smoke-from-engine-or-exhaust-inspection) is coming from. Replicate whatever conditions necessary to get the engine to smoke again, and lift the hood to see where it is coming from. Keep in...

Hi I have a chevy j1 2010 model. My remote is jamed and I can't start my car. It shuts off my fuel how can I reset my alarm to start the vehicle.

Hi there. The remote will need to be repaired or replaced and then the new remote would need to be programmed to match the computer system in your vehicle. Then your vehicle will start up properly. If you need further...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com