Mercury Tracer Vent Oil Separator Replacement at your home or office.

What is the Vent Oil Seperator all about?

An internal combustion engine runs on a series of controlled explosions. During this process, gases are created. While most of those gases will eventually make their way from the combustion chamber through the exhaust manifold and out the muffler, some pass the pistons into the crankcase. The latter is called “blow-by”, and it can be very damaging to an engine. It creates additional pressure within the crankcase that damages seals and gaskets. To combat this deleterious effect, a ventilation system is used.

These systems require several different components in order to operate, including the positive crankcase ventilation (PCV) valve and the vent oil separator hose. The vent oil separator hose is responsible for capturing and collecting oil droplets that invariably accompany those spent gases and ensuring they are not released into the combustion chamber. The gases are then re-burned for emissions control. If your vent oil separator is plugged, excess pressure can build up inside the crankcase and blow out a seal, causing an oil leak. Excess oil in the vent oil separator can also enter the combustion chamber, causing a misfire and rough run with blue, oily exhaust.