Mercury Sable Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(251)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(251)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Mercury Sable Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Mercury SableV6-3.8LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1987 Mercury SableV6-3.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1997 Mercury SableV6-3.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1992 Mercury SableV6-3.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
1988 Mercury SableV6-3.0LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
1988 Mercury SableV6-3.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2004 Mercury SableV6-3.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
1998 Mercury SableV6-3.0LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Mercury Sable Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercury mechanics

Real customer reviews from Mercury owners like you.

Excellent Rating

(251)

Rating Summary
234
8
0
2
7
234
8
0
2
7

Jamahl

20 years of experience
830 reviews
Jamahl
20 years of experience
Mercury Sable V6-3.0L - Power Steering Pump - Winter Garden, Florida
He is dependable, courteous and a real professional.

David

42 years of experience
220 reviews
David
42 years of experience
Mercury Sable V6-3.0L - Oil Change - Atlanta, Georgia

Eliseo

12 years of experience
239 reviews
Eliseo
12 years of experience
Mercury Sable V6-3.0L - Fuel Pump - Magnolia, Texas
Outstanding service! Eliseo was on time for both appointments, figured out our issue and completed the repair within the time frame quoted. I highly recommend Eliseo for any mechanic needs for your vehicle.

Patrick

32 years of experience
369 reviews
Patrick
32 years of experience
Mercury Sable V6-3.0L - Car AC Repair - Las Vegas, Nevada
Patrick did an amazing job diagnosing my car's A/C system. He was very thorough and actually saved me a bunch of money from the original estimate. He attacked the issue starting with the least expensive option and that allowed him to eliminate some of the expensive portions of the repair. He went above and beyond to help and I will start using Your Mechanic whenever I need a repair. Thank you Patrick you were awesome!

Excellent Rating

(251)

Rating Summary
234
8
0
2
7
234
8
0
2
7
Number of Mercury Sable services completed
2761+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercury MECHANICS
600+
experts on our platform

Recent articles & questions

Symptoms of a Bad or Failing Valve Cover Gasket
Common signs of a faulty gasket include a burning oil smell, dirty valve cover, oil leaks, low engine oil, and a rough-running engine that misfires.
P2317 OBD-II Trouble Code: Ignition Coil F Secondary Circuit
P2317 P2317 code definition Ignition coil F secondary circuit What the P2317 code means This trouble code indicates that the powertrain control module has detected an abnormal reference voltage from the one of the engine’s ignition coils. What are the...
B1812 OBD-II Trouble Code: Lamp Backup Switch Input Circuit Short to Battery
B1812 means there is a circuit issue with a lamp backup switch, possibly due to a blown fuse or bulb defect.

Keyless remote broken

The system will need to be checked to see if the drivers door lock is having an issue or the remote is the cause. The remote may have a bad button for the drivers door since it is the one...

Clutch pedal goes to floor when pressed

With the symptoms you have described, the most likely cause is a leak in the clutch hydraulic system. If there is a leak on the system it causes air to enter. Since air is not able to be compressed the...

How do turn off the 'horn beep' function on a mopar aftermarket remote start in a 2015 Jeep Grand Cherokee?

If you do not have the publications and manual that came with the system, you may inquire about them at the dealer or look it up online so you have the manual for the system. If this is not a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com