Mercedes-Benz SLC43 AMG Oil level is low Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Oil level is low Inspection Service

How much does a Oil level is low Inspection cost?

On average, the cost for a Mercedes-Benz SLC43 AMG Oil level is low Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2020 Mercedes-Benz SLC43 AMGV6-3.0L TurboService typeOil level is low InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2017 Mercedes-Benz SLC43 AMGV6-3.0L TurboService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2018 Mercedes-Benz SLC43 AMGV6-3.0L TurboService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2019 Mercedes-Benz SLC43 AMGV6-3.0L TurboService typeOil level is low InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Mercedes-Benz SLC43 AMG Oil level is low Inspection prices

A vehicle needs oil to run and without it, or too little of it, severe damage can happen to the engine. Engine oil lubricates all of the major moving parts of the engine, which cuts down on wear and tear and dissipates the heat the engine generates. Not having enough oil in a vehicle can be deadly to the car’s engine.

Engine oil operates in a closed loop system so if the engine is losing oil at a significant rate, there is a problem somewhere, most likely a leak.

How this system works:

Engine oil is stored in the oil pan, which holds 4 to 6 quarts of oil depending on the vehicle. When the vehicle engine is started, the oil pump sucks oil from the oil pan through a part called the pickup tube. The oil is then pumped into the oil filter, which removes the dirt and debris that has accumulated in the oil. The engine oil then circulates throughout the engine via spurt holes before heading back to the oil pan where the process starts all over again.

Common reasons for this to happen:

  • Oil Light Comes On: The Low Oil Engine Warning light will illuminate when the oil level gets lower than it should in the oil pan. This warning light varies on vehicles but in most it looks like an oilcan with a droplet coming out of the spout. If this light illuminates for more than a couple of seconds at start-up the car should be inspected immediately as the oil level is too low in the car. This can lead to damage to critical engine components and expensive repairs.

  • Oil Leak: An oil leak can occur in just about any of the oil system components. Common problems are leaking or failing oil pan gaskets. As gaskets and seals age they tend to shrink and fail letting oil escape the system. A leaking gasket can quickly turn into an expensive repair if not addressed, as critical components will not have the lubrication they need to operate safely.

  • Worn Piston Rings: Piston rings help control the oil pressure in the vehicle. If they are worn or damaged the oil levels in the car will drop. Look for white or gray exhaust smoke, slow acceleration and excessive oil consumption. This problem can quickly damage critical and expensive engine components such as the pistons themselves and should be repaired quickly.

  • Faulty Worn Valve Guides: Valve guides are a cylindrical piece of metal that is pressed or cast into the cylinder head. They help to conduct heat away from the combustion process and into the cylinder head where it may be taken up by the cooling system. If valve guide seals are worn, cracked or broken the engine will suck oil down the guides and dump it into the cylinder, which will pull oil from the lubrication system. Oil levels will drop. This problem should be addressed as soon as possible.

  • Incorrect Oil Type: Engines can be filled with low viscosity synthetic oil, which reduces friction and increase fuel efficiency. A lower viscosity oil is thinner and can leak past rings and the seals on valve guides resulting in a loss of oil. Synthetic oil should not be used for the engine break-in period.

  • Assembly Mistakes: Piston rings that are not seated or sealed properly can cause oil to leak out of the engine. This problem can result in significant oil loss. The engine must be rebuilt to correct this problem.

What to expect:

Oil will become black and a bit gritty over time, this is normal and does not indicate that the oil needs to be changed. Most modern oils, especially the synthetics can last between 7,000 and 10,000 miles before they need to be changed.

How it's done:

A mechanic will inspect your car for oil leaks, the oil type and check to see if the oil level warning light is operating as it should. The mechanic will also inspect some related engine components. This will include valve guides, piston rings and more.

How important is this service?

Loss of engine oil is almost always a sign of a more serious problem. Engine oil is literally the lifeblood of the car and if the levels get too low it can damage critical components of the engine. Oil loss or high oil consumption should be investigated as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Juan

12 years of experience
55 reviews
Juan
12 years of experience
Mercedes-Benz CLK320 V6-3.2L - Oil level is low - Vallejo, California
Super Professional

Kenneth

20 years of experience
801 reviews
Kenneth
20 years of experience
Mercedes-Benz S320 L6-3.2L - Check Engine Light is on - Los Angeles, California
Kenneth arrived on time. He was very professional and knowledgeable. He clearly explained the issue with my check engine light and gave me great recommendation to the issues. I will continue to call upon Kenneth for and future issues with my Mercedes.

Robert

31 years of experience
641 reviews
Robert
31 years of experience
Mercedes-Benz E350 V6-3.5L - Serpentine/Drive Belt - San Jose, California
Mr Robert is a great and honest mechanic. If you ask what your car might need, he’ll tell you. He’ll take the time to talk to you and buil a rapport with you.

Kevin

24 years of experience
554 reviews
Kevin
24 years of experience
Mercedes-Benz CLK350 V6-3.5L - Oil Change - Atlanta, Georgia
Another great service call with Kevin! Thanks

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Symptoms of Bad or Failing Spring Insulators
Common signs include the vehicle bottoming out, excessive road noise, grinding noises while turning, and damage to front tires and brakes.
How Long Does an Air Charge Temperature Sensor Last?
The The air charge temperature sensor, also referred to as the intake air temperature sensor, works to monitor the temperature of the air as it enters your car engine. The engine’s computer has to have this information so it can...
P006A OBD-II Trouble Code: Manifold Absolute Pressure (MAP) - Mass or Volume Air Flow Correlation
P006A means there is a signal correlation problem between the engine computer and MAF or MAP sensor, likely due to a faulty intake system or sensor.

my car swayss back and forth on its own. starting at 30mph

Hello. If you have replaced these parts and it is still swaying then you need to check the tires (https://www.yourmechanic.com/article/how-to-tell-the-difference-in-size-for-a-car-tire-by-jason-unrau). Make sure that they are the correct size. Aftermarket wheels will also cause this problem if they are not the...

Can I use gasket maker as sealant for my oil pan?

Using gasket maker in place of an oil pan gasket works sometimes. However, what I recommend is using a the actual cork/rubber gasket with a thin coat of The Right Stuff brand gasket sealant applied to both the engine block...

My car won’t start I have a 2004 Chevy Monte Carlo 3.4 l, some guy told me it was my E.G.R valve I changed it nothing it cranks but still don’t start,I changed my fuel filter cause it clogged it started for a bit turned it off then didn’t start again but cranks but don’t turn over or start, I took out the air filter cleaned out the air filter with carbon cleaner it started for a bit again then next day went to start it cranks but don’t start up. That’s my problem

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com