Mercedes-Benz R550 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(12)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Mercedes-Benz R550 Mass Airflow Sensor Replacement is $270 with $176 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Mercedes-Benz R550V8-5.5LService typeMass Airflow Sensor ReplacementEstimate$465.99Shop/Dealer Price$571.24 - $847.62
Show example Mercedes-Benz R550 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0

Dan

39 years of experience
981 reviews
Dan
39 years of experience
Mercedes-Benz G550 V8-5.5L - Mass Airflow Sensor - Cumming, Georgia
Dan was quick and efficient with many different things. Everything is working great now.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Mercedes-Benz C230 L4-1.8L Turbo - Mass Airflow Sensor - Fort Washington, Maryland
Prompt, professional, pleasant, and knowledgeable. Richard texted me to let me know he would be 15 mins late and still showed up 5 mins early. He made additional recommendations and documented all of his work.

Timothy

21 years of experience
21 reviews
Timothy
21 years of experience
Mercedes-Benz SLK230 L4-2.3L Turbo - Mass Airflow Sensor - Fort Lauderdale, Florida
Great! Arrived on time and finished before I expected. No problem with Timothy or his work Does an excellent job.

Chris

22 years of experience
2235 reviews
Chris
22 years of experience
Mercedes-Benz C300 V6-3.0L - Mass Airflow Sensor - Mission Viejo, California
Chris arrived early and finished ahead of schedule.

Excellent Rating

(12)

Rating Summary
12
0
0
0
0
12
0
0
0
0
Number of Mercedes-Benz Mass Airflow Sensor Replacement services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

Can Sensors Be Cleaned or Do They Need to Be Replaced?
In In most cases, sensors for your automobile will need to be replaced if they fail, but depending on the type of sensor and its location or function, some can be cleaned and reused (https://www.yourmechanic.com/question/can-sensors-be-cleaned-or-do-they-need-to-be-replaced). Sensors can come in many...
Symptoms of a Bad or Failing Brake Booster Vacuum Sensor
A failing brake booster vacuum sensor will cause the brake pedal to be stiff or turn on the Check Engine Light.
Symptoms of a Bad or Failing EVP Position Sensor
Common signs include poor cold start performance, the Check Engine Light coming on, and failing an emissions test.

Where is the crankshaft position sensor location

Hey there, thanks for writing in. The sensor is on the right rear of the engine block behind the exhaust manifold heat shield. If you need help replacing the crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement), a certified technician from YourMechanic can come...

Why won't my car go in reverse?

Hello - hopefully the few days where the transmission was losing fluid (https://www.yourmechanic.com/services/transmission-fluid-is-leaking-inspection) badly did not damage anything. Causes of "no reverse" include: valve body wear, especially the pressure regulator valve, a loose nut on the transmission main shaft (causes...

Looking for a ohms / resistance chart for the water thermal sensor switch on a 1985 toyota celica.

Hi there. Get a digital ohm meter and check the resistance on the coolant temperature sensor (water thermal sensor). You are looking for readings that are more than 200 ohms in variance between a cold and a warm engine. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com