Mercedes-Benz ML400 Car is not starting Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(344)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(344)

Car is not starting Inspection Service

How much does a Car is not starting Inspection cost?

On average, the cost for a Mercedes-Benz ML400 Car is not starting Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Mercedes-Benz ML400V6-3.0L TurboService typeCar is not starting InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
Show example Mercedes-Benz ML400 Car is not starting Inspection prices

A car that fails to start is a rare occurrence in this age of greatly improved efficiency and reliability. But it still happens occasionally, and the advanced electronic technologies that have made cars better have also made the job of roadside diagnosis difficult, if not impossible, for even reasonably handy owners. One of our expert mobile mechanics can provide an expeditious diagnosis and provide a quote for any necessary repairs.

Common reasons for this to happen:

If the engine cranks, but the car doesn't start:

  • Bad fuel pump: A faulty fuel pump won't deliver fuel to the engine, even if you've just filled up.

  • Bad spark plugs: Without hot sparks to ignite the fuel charge in each cylinder, there is no combustion and no expansion of the burning mixture. Thus, the engine will not start.

  • Bad timing belt: If the timing belt stretches or breaks, the engine will not run. Moreover, continuing to crank the engine may bring the valves into contact with the piston, causing serious engine damage.

  • Bad ignition coil: Without a functional coil to step up the voltage, there can be no spark. No spark means no start.

  • Faulty cam or crank sensor: If the sensors are faulty they will either provide no information to the ignition system, or will provide incorrect data. Either way, the engine will not fire.

If nothing happens after you turn the key:

  • Bad battery or terminals: Batteries have a finite lifespan, and terminals can loosen or corrode.

  • Bad starter: This should be obvious from the response to the key. If nothing happens at all when you turn the key, the starter may have reached the end of its life.

  • Ignition problem: This could be due to faulty contacts in the ignition switch, or in the wiring.

If there is a grinding noise when you turn the key:

  • Starter is bad: Do not persist in cranking the engine.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the cause of your car’s failure to start through a series of diagnostic procedures. You will receive an upfront, fair and transparent estimate for the necessary repairs. The mechanic will book a follow-up appointment to perform the repairs and will bring the required parts and tools. All repairs are covered by our warranty.

How it's done:

The mechanic will check the ignition system, fuel system, and charging system, and then look for any mechanical damage. The mechanic may also try an alternative fuel source, like a quick shot of brake or carburetor cleaner into the throttle body, or a quick shot of liquid fuel via a vacuum line. If the car starts momentarily and then dies, that indicates that you have a fuel delivery issue.

How important is this service?

It goes without saying that a non-starting car is an important issue to address. Do not ignore or abandon the car if it’s not starting; this is an issue that should be dealt with promptly. Book a mechanic to perform a thorough diagnostic as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(344)

Rating Summary
304
16
3
7
14
304
16
3
7
14

Marko

10 years of experience
29 reviews
Marko
10 years of experience
Mercedes-Benz CLK350 V6-3.5L - Car is not starting - Decatur, Georgia
Marko was very polite and knowledgeable as well as prompt. He got right to it and finished the job in a reasonable amount of time. He also communicated with me a few times even before he showed up for the appointment.

Andrew

12 years of experience
29 reviews
Andrew
12 years of experience
Mercedes-Benz C240 V6-2.6L - Car is not starting - Cape Coral, Florida
Amazing!

John

27 years of experience
1019 reviews
John
27 years of experience
Mercedes-Benz CLS550 V8-4.6L Turbo - Car is not starting - Friendswood, Texas
Great experience with John, and would definitely recommend him to friends and family.

Chris

22 years of experience
2235 reviews
Chris
22 years of experience
Mercedes-Benz 300SL L6-3.0L - Car is not starting - San Clemente, California
Very happy to have found Your Mechanic. Easy to use, quick appointment set, knowledgeable mechanics. Will definitely use again if needed.

Excellent Rating

(344)

Rating Summary
304
16
3
7
14
304
16
3
7
14
Number of Mercedes-Benz Car is not starting Inspection services completed
3784+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer's Guide to the 2012 Mercedes-Benz GL350 BlueTec
If If you love a diesel engine in your SUV, but still want to ride around in luxury, your perfect vehicle may very well be the 2012 Mercedes-Benz GL350 BlueTec. Key Features The most important feature worth noting is the...
P2213 OBD-II Trouble Code: NOx Sensor Circuit Bank 2
P2213 means there is an issue with the NOx Sensor Circuit Bank 2, most likely due to a faulty catalytic converter, or bad oxygen sensors.
How to Replace the Electronic Spark Control Module
The car ignition has an electronic spark control module that fails when the Check Engine Light illuminates or if the engine does not start.

Replacing Mopar ATF 4+ fluid with Valvoline ATF 4+ fluid

Sure you can. They all mix. Just make sure it's the 4+. It's the same design; they all mix perfectly fine. There is no problem in doing that at all. If you would like to have a technician perform this...

Engine, VSC TRAC and TRAC OFF lights are on at the same time

This is not a common problem and you should not drive the vehicle until this is properly checked out. This can be due to a bad connection in the ignition switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-ignition-switch). Other possibilities include a serious problem with the...

Brake rotor thickness before replacement

The standard thickness when new the front rotors are 28mm or 1.102 in. The minimum thickness before or after machining is 25.0mm or .983 in. This means you cannot take off more than about 3mm or .10 in if the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com