Mercedes-Benz GLK350 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(22)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(22)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mercedes-Benz GLK350 Brake Pad Replacement is $231 with $91 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Front ReplacementEstimate$336.86Shop/Dealer Price$388.63 - $529.75
2010 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Front ReplacementEstimate$327.85Shop/Dealer Price$376.52 - $515.33
2012 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Rear ReplacementEstimate$327.85Shop/Dealer Price$376.57 - $515.40
2012 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Front ReplacementEstimate$327.85Shop/Dealer Price$376.57 - $515.40
2010 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Rear ReplacementEstimate$327.85Shop/Dealer Price$379.14 - $519.91
2014 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Rear ReplacementEstimate$357.05Shop/Dealer Price$406.71 - $546.25
2014 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Front ReplacementEstimate$327.85Shop/Dealer Price$376.59 - $515.45
2015 Mercedes-Benz GLK350V6-3.5LService typeBrake Pads - Front ReplacementEstimate$327.85Shop/Dealer Price$376.57 - $515.40
Show example Mercedes-Benz GLK350 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0

Jay

20 years of experience
66 reviews
Jay
20 years of experience
GLK350 2015 - Brake Pads - Des Plaines, IL
Jay is an absolute professional who came on time and finished his quality work on time. He explained what he found and also made recommendations on what I needed to take care of on my car what can wait.

Ronald

40 years of experience
118 reviews
Ronald
40 years of experience
GLK350 2010 - Tire Rotation - Spring, TX
Ron is just absolutely the best! In these days where customer service seems to be lacking, he goes above and beyond to make the experience so pleasant. From texting beforehand, updating, and arriving on time. Proficient and professional, and did my Mercedes GLK service promptly and efficiently. SO PLEASANT. KIND DEMEANOR and extremely gracious. My Mechanic should be proud to have such a wonderful representative showing up in their name. I plan on using him every time I have a service needed.. Here's to a wonderful future relationship, Ron. It truly was such a pleasure meeting you.. And THANKS. God be with you and keep you. Stay safe. Christine

Mike

10 years of experience
177 reviews
Mike
10 years of experience
GLK350 2015 - Reset Indicator Lights - Garner, NC
Mike is excellent

Joel

15 years of experience
1142 reviews
Joel
15 years of experience
GLK350 2011 - Initial Safety Inspection - Jacksonville, FL
Joel was on time and very thorough!

Excellent Rating

(22)

Rating Summary
21
1
0
0
0
21
1
0
0
0
Number of Mercedes-Benz GLK350 Brake Pad Replacement services completed
242+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2011 Cadillac DTS
The The 2011 Cadillac DTS is a full-size sedan that offers the comfort and luxury you expect from this automaker. It manages to combine a comfortable ride with tremendous amounts of cargo capacity in the trunk, although it isn’t without...
The Guide to Right-of-Way Laws in Washington
When When driving in the state of Washington, there are bound to be any number of times when you will have to stop or slow down to allow another vehicle or a pedestrian to proceed. Even in the absence of...
How to Register a Car in Florida
All All vehicles must be registered through Florida’s Department of Highway Safety and Motor Vehicles (DHSMV) or through eTags, which is an online registration system approved by the state. If you are new to Florida, you have 10 days to...

Loss of oil pressure

The oil sender may be bad causing the erratic readings. I would, however, suggest having the oil pressure tested with a gauge before replacing the sending unit for the oil pressure. If it tests okay and the pressures are normal,...

How to replace oil cooler hose 08 Landrover lr2

It does appear as though you will need to remove the intake manifold. My information system doesn't give specific instruction for the oil cooler hoses, but it does give information about the oil cooler. This sort of situation isn't out...

Fan blower stopped working

Hi, thanks for writing in. I'd be happy to provide my insight. There are a few other possibilities with this scenario. The blower switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-blower-motor-switch), the blower motor itself, function switch or the blower fan relay (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-blower-motor-relay) could have a...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com