Mercedes-Benz GLE350 Spark Plug Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Spark Plug Replacement Service

How much does a Spark Plug Replacement cost?

On average, the cost for a Mercedes-Benz GLE350 Spark Plug Replacement is $366 with $142 for parts and $224 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Mercedes-Benz GLE350V6-3.5LService typeSpark Plug ReplacementEstimate$1010.50Shop/Dealer Price$1147.13 - $1530.29
2016 Mercedes-Benz GLE350V6-3.5LService typeSpark Plug ReplacementEstimate$639.78Shop/Dealer Price$726.49 - $970.73
2021 Mercedes-Benz GLE350L4-2.0L TurboService typeSpark Plug ReplacementEstimate$516.78Shop/Dealer Price$590.56 - $805.19
2020 Mercedes-Benz GLE350L4-2.0L TurboService typeSpark Plug ReplacementEstimate$516.78Shop/Dealer Price$590.56 - $805.19
2017 Mercedes-Benz GLE350V6-3.5LService typeSpark Plug ReplacementEstimate$800.37Shop/Dealer Price$891.01 - $1138.20
Show example Mercedes-Benz GLE350 Spark Plug Replacement prices

What are spark plugs and how do they work?

Spark plugs are one of the key components of your vehicle’s ignition system. They ignite gasoline and air inside of your engine. This gives your engine the power to propel you down the road. The spark plug takes high voltage electricity from the ignition coil and creates a spark at just right moment during the engine’s combustion cycle. This gives the engine the best mix of power, fuel economy and low emissions. However, the electrode at the end of the spark plug eventually wears out and can cause performance issues.

Spark plugs-MATROX-1

When should you replace spark plugs?

Replacement should follow the vehicle maintenance schedule. This will be listed in the vehicle’s owner’s manual. Some cars require regular replacement at 30k, 60k or 100k miles. It is possible in some cases that a spark plug might fail before the service schedule, but it’s not typically common.

Avoiding spark plug replacement can cause:

  • Difficulty starting your car.
  • Check engine light for a misfire code.
  • Flashing check engine light during acceleration for misfire, this can cause engine damage.
  • Reduced fuel economy and/or power.
  • Rough idle and/or unexplained engine vibration.
  • Failed State emission testing.

Even if only one spark plug is found to be faulty, they should always be replaced in sets. Most engines will require 4,6, or 8 spark plugs.

How do mechanics replace spark plugs?

Spark plugs are threaded into the engine’s cylinder head(s). Most cars have one plug per cylinder, so a four-cylinder engine will have four plugs, a six-cylinder engine will have six plugs, and so forth. The mechanic will:

  • Have the correct spark plugs on hand for your vehicle
  • Pull any diagnostic trouble codes that may be related to worn spark plugs.
  • Remove the original spark plugs and look at removed spark plugs for any clues indicating engine mis-operation exists; such as oil burning, excessively rich mixture, pre-ignition damage etc. Inform owner of any found unusual conditions.
  • Install new plugs using a torque wrench.
  • Finally, a road test of the vehicle to confirm normal operation.

Is it safe to drive with worn spark plugs?

Yes, but spark plugs that are worn enough to cause engine-misfiring have the potential to cause engine damage and overheating of the catalytic converter. Regardless of the age of the plugs, or mileage, if the engine misfires or runs poorly, the plugs should be inspected for defects. Generally, spark plug failure will not keep the engine from running, but in cases of extreme wear, you may experience a limitation in the speed at which you can drive the car. If the maintenance schedule says the plugs should be replaced, it is best to do so promptly.

When having spark plugs replaced keep in mind:

  • High-speed driving may accelerate spark plug wear. Consider earlier than required inspection and tune-up if you operate the car in severe conditions.
  • Plugs should always be promptly replaced per the manufacturer maintenance schedule even if they appear to be working perfectly.
  • If your vehicle is equipped with spark plug wires (as opposed to a coil-on-plug system), the wires should be replaced at the same time. This may increase the cost of your repair.
  • It is possible that when doing a spark plug replacement, your vehicle may also need additional parts like ignition coils, this will add to the repair cost.
  • Some engines require that the intake manifold be removed while replacing spark plugs. This may increase the parts and labor cost for the repair.
  • Leaking valve cover gaskets, which have let oil get in contact with the spark plugs, coils or wires, may be the cause of ignition system issues. Valve cover gaskets will need to be replaced in addition to the spark plugs, wires or coils. This will add to the repair cost.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Edgar

5 years of experience
168 reviews
Edgar
5 years of experience
GLE350 2016 - Spark Plugs - Austin, TX
This was the second time I've used Edgar, and everything went as smoothly as the first time. A couple of the spark plugs are a big pain to access, but he got the work done and at a small fraction of what the dealership wanted. Will keep using him for other work!

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Mercedes-Benz GLE350 services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

P2298 OBD-II Trouble Code: O2 Sensor Out of Range During Deceleration Bank 2 Sensor 1
P2298 means there is a voltage problem with the 02 sensor. Most of the time it's due to the oxygen sensor. Some causes may be vacuum or exhaust leak.
A Buyer’s Guide to the 2012 Suzuki Kizashi
This This affordable little sedan showed up on the market in 2010 as an effort to bolster Suzuki’s fading popularity in the United States car game. While it may not have saved the company’s American operations, it is still an...
How to Vacuum a Car
Keeping Keeping your car clean (https://www.yourmechanic.com/article/the-top-10-car-cleaning-products-interior-exterior) on the outside as well as on the inside (https://www.yourmechanic.com/article/4-essential-things-to-know-about-cleaning-the-interior-of-your-car) is part of regular vehicle maintenance. While keeping the exterior of your car clean is mainly for appearance and corrosion resistance, cleaning your car’s...

Timing belt stripped teeth,I changed the belt, pullyes and water pump now it doesn't fire

Since the timing belt stripped off the teeth of the belt then the camshaft and crankshaft got out of time and this is an interference engine. This means that you most likely bent the valves when the timing belt teeth...

Hi, I drive a Tiida Latio Nissan. Lately i have had difficulties accelerating. It lags behind then all of a sudden it pushes forward. Then when braking it pushes behind and can even start reversing itself. what could be the issue ?

Check engine light in code mean p0302 and p103a

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com