Mercedes-Benz G550 Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Mercedes-Benz G550 Fuel Injector Replacement is $1288 with $980 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Mercedes-Benz G550V8-5.5LService typeFuel Injector ReplacementEstimate$2320.32Shop/Dealer Price$2829.01 - $4323.90
2013 Mercedes-Benz G550V8-5.5LService typeFuel Injector ReplacementEstimate$2388.09Shop/Dealer Price$2891.91 - $4383.14
2011 Mercedes-Benz G550V8-5.5LService typeFuel Injector ReplacementEstimate$2300.50Shop/Dealer Price$2802.49 - $4292.34
2012 Mercedes-Benz G550V8-5.5LService typeFuel Injector ReplacementEstimate$2388.09Shop/Dealer Price$2892.02 - $4383.34
2014 Mercedes-Benz G550V8-5.5LService typeFuel Injector ReplacementEstimate$2369.65Shop/Dealer Price$2876.19 - $4359.10
2009 Mercedes-Benz G550V8-5.5LService typeFuel Injector ReplacementEstimate$2300.50Shop/Dealer Price$2803.02 - $4293.28
Show example Mercedes-Benz G550 Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Mercedes-Benz G550 V8-5.5L - Battery - Thornton, Colorado
Great

Nazareth

28 years of experience
345 reviews
Nazareth
28 years of experience
Mercedes-Benz G550 V8-5.5L - Oil Change - Pasadena, California
Nazareth is an exceptionally competent and nice person, It was a pleasure to deal with. Highly recommending his service.

Tabitha

18 years of experience
379 reviews
Tabitha
18 years of experience
Mercedes-Benz G550 V8-5.5L - Headlight Bulb Replacement (Driver Side Low Beam) - La Jolla, California
very knowledgable, patient and good comunicator., detailed explanations.

Sergio

11 years of experience
204 reviews
Sergio
11 years of experience
Mercedes-Benz G550 V8-5.5L - Pre-purchase Car Inspection - San Antonio, Texas
Sergio was responsive and on-time. He was also very throughout with his inspection.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mercedes-Benz G550 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

B1973 OBD-II Trouble Code: Passenger Rear Seat Down Switch Circuit Short to Battery
B1973 means there is a circuit malfunction in a passenger rear seat down switch, likely due to damaged electrical parts or a faulty switch.
How Long Does a Mass Airflow Sensor Last?
The The right amount of air and fuel in your engine is a vital component in keeping the engine running as it should. Making sure that all of the vital components of the air and fuel system are running at...
How to Replace a Flex Coupling Steering Damper
A flex coupling steering dampener helps suppress steering vibrations. Signs of failure include excessive vibration and play in the steering wheel.

The car has a decrease in gas mileage

Hello. For a sudden drop like this to occur, it usually means that a sensor it not reading correctly. I usually install a scan tool first to check things like the oxygen sensors (https://www.yourmechanic.com/services/oxygen-sensor-replacement) and the air flow meter as...

When it's hot outside, the car will overheat after driving a long distance. It doesn't do it in cold weather.

Hi there. When coolant gets hot, it expands. Which is why the overflow reservoir exists. If the vehicle tends to overheat during the hot summer season, it may be contributed to the air conditioning system. Anytime you turn the AC...

How do you know when evaporative emission vapor vent tube from fuel tank to evaporative emission canister is faulty?

If a leak in the EVAP system is detected, the Check Engine light will illuminate on the dash and the trouble code related to the problem will be stored in the engine computer. When an air leak is present in...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com