Mercedes-Benz AMG GT C Transfer case fluid is dirty Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5,730)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5,730)

Transfer case fluid is dirty Inspection Service

How much does a Transfer case fluid is dirty Inspection cost?

On average, the cost for a Mercedes-Benz AMG GT C Transfer case fluid is dirty Inspection is $105 with $0 for parts and $105 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Mercedes-Benz AMG GT CV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$124.99Shop/Dealer Price$133.39 - $139.69
2020 Mercedes-Benz AMG GT CV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2018 Mercedes-Benz AMG GT CV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.41 - $119.72
2019 Mercedes-Benz AMG GT CV8-4.0L TurboService typeTransfer case fluid is dirty InspectionEstimate$104.99Shop/Dealer Price$113.39 - $119.68
Show example Mercedes-Benz AMG GT C Transfer case fluid is dirty Inspection prices

A transfer case is unique to all-wheel drive and four-wheel drive vehicles, sending power from the engine to the rear wheels. The transfer case is a sealed unit and may be either gear-driven or chain-driven depending on the manufacturer. Because the transfer case is a sealed unit, it requires lubrication to keep all of the moving parts clean and at a reasonable temperature. Transfer case fluid ensures the longevity of parts in the transfer case.

How this system works:

In four-wheel drive and all-wheel drive vehicles, a transfer case is either connected directly to the back of the transmission, or by a small driveshaft further back in the vehicle. When activated, the transfer case takes power from the engine to the back wheels. Depending on the kind of vehicle, power may go to the rear wheels on a full-time or part-time basis. All-wheel drive systems are typically on all of the time while a four-wheel drive system are activated by either pressing a button in the vehicle or by manipulating a selector lever, typically located near the transmission hump on the floor. In both systems, transfer case fluid keeps the internal parts of the transfer case lubricated. Over time, transfer case fluid will become dirty and break down. When transfer case fluid breaks down you may notice shuddering from the vehicle while turning or a whining noise from the gears in the transfer case.

Common reasons for this to happen:

  • Time: Over time, transfer case fluid will break down and become dirty. Dirty transfer case fluid may cause moving parts in the transfer case to have more difficulty moving, which may cause them to fail.

  • Improper Filling: If the transfer case is not properly filled with transfer case fluid, it may break down more quickly, have difficulty dissipating heat, and keeping parts lubricated.

What to expect:

A top-rated mobile mechanic will come to your home or office and determine whether or not your transfer case fluid needs to be replaced. If it does, he or she will then provide a detailed inspection report outlining the reason the fluid needed to be replaced and the cost of any repairs that may need to be made.

How it's done:

A mechanic will first have your vehicle idle for a few minutes to warm the fluid as warm fluid will drain easier. The mechanic will then drain the old transfer case fluid through the drain plug. The drain plug on most transfer cases is magnetic and picks up metal shavings that otherwise might potentially damage components in the transfer case. The mechanic should clean the drain plug before replacing it. The mechanic will then remove the fill plug and add new fluid. The mechanic should also double-check the amount of fluid, he or she puts in the transfer case, ensuring that it was done properly. A vehicle that is under-lubricated may not dissipate heat or protect critical components as well as a vehicle that is properly lubricated. When the transfer case is full, the mechanic will replace the fill plug and check for any leaks.

How important is this service?

By choosing to not replace your transfer case fluid, you may compromise critical and expensive components inside the transfer case. Because the transfer case is a sealed unit, it is very important that the transfer fluid is filled properly so that heat is appropriately dissipated and components to not suffer from unneeded friction. Repairing a differential can be very expensive, so in order to preserve these components, you should have you transfer case fluid replaced at the correct intervals. Doing so could potentially save you a lot of money down the road.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123

Theodore

16 years of experience
1638 reviews
Theodore
16 years of experience
Mercedes-Benz C230 L4-2.3L Turbo - Fuel Filter - Everett, Washington
He checked out the other questions I had about my car and gave me advice about it. Changed the fuel filter in a jiffy and didn't leave a trace of it having been done. He made sure everything ran smoothly before he left. Very convenient and great service!

Robert

15 years of experience
32 reviews
Robert
15 years of experience
Mercedes-Benz C300 V6-3.5L - Oil Change - Plano, Texas
Professional. Timely and friendly

Chris

22 years of experience
2266 reviews
Chris
22 years of experience
Mercedes-Benz CLA250 L4-2.0L Turbo - Oil Change - Irvine, California
He was very professional.

Jamie

22 years of experience
120 reviews
Jamie
22 years of experience
Mercedes-Benz S420 V8-4.2L - Serpentine/Drive Belt Replacement - Ontario, California
Great job

Excellent Rating

(5,730)

Rating Summary
5,332
192
54
29
123
5,332
192
54
29
123
Number of Mercedes-Benz services completed
63030+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform

Recent articles & questions

How Does the Fuel System Work in a Modern Car?
Cars Cars have evolved a staggering amount over the last decade, and the biggest issue that manufacturers addressed with those advancements involves the amount of fuel used by the engine. Consequently, the fuel systems found in modern cars can get...
Symptoms of a Bad or Failing Headlight Switch
If the high beams, daytime running lights, or headlamps are not working consistently, you may need to replace the headlight switch.
P0310 OBD-II Trouble Code: Cylinder 10 Misfire Detected
P0310 P0310 Code Definition The P0310 code is a generic powertrain code related to the ignition system or misfire. In this case, a misfire has been detected specifically in cylinder number 10. Codes related to the P0310 include: P0300: Random/Multiple...

Radiator leaking fluid

Hi. Fluid leaks are common, particularly from old rubber hoses. I suggest you have a certified mechanic, like one from YourMechanic, have all of the hoses replaced (https://www.yourmechanic.com/services/radiator-hose-replacement). It may seem like overkill, but all of the other hoses that...

Truck will crank but will not start

The best way to approach a starting (https://www.yourmechanic.com/services/car-is-not-starting-inspection) issue like this is to break it down and start with one system at a time. Keep it as simple as possible. If you have not already checked for spark, you will...

I have a 2015 Ford F-150 2800 miles on it. Transfer case output shaft seal started leaking. Dealer covered it under factory warra

This can happen due to a few reasons. It's possible there was a manufacturing issue/defect with the seals. They could have not only gotten into the production line, but the parts supply network as well. Another issue can be the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com