logo

Mercedes-Benz 500SEC Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(5,626)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(5,626)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Mercedes-Benz 500SEC Brake Drum Replacement is $363 with $201 for parts and $161 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Mercedes-Benz 500SECV8-5.0LService typeBrake Drum ReplacementEstimate$630.34Shop/Dealer Price$768.81 - $1117.27
1993 Mercedes-Benz 500SECV8-5.0LService typeBrake Drum ReplacementEstimate$564.36Shop/Dealer Price$694.89 - $1019.41
1984 Mercedes-Benz 500SECV8-5.0LService typeBrake Drum ReplacementEstimate$584.80Shop/Dealer Price$720.44 - $1060.28
Show example Mercedes-Benz 500SEC Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Mercedes-Benz services completed
61886+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Mercedes-Benz mechanics

Real customer reviews from Mercedes-Benz owners like you.

Excellent Rating

(5,626)
Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119

Melvin

17 years of experience
221 reviews
Request Melvin
Melvin
17 years of experience
Request Melvin
by Leslie
Mercedes-Benz C240 V6-2.6L - Crankshaft Position Sensor - Lithonia, Georgia

Michael

16 years of experience
606 reviews
Request Michael
Michael
16 years of experience
Request Michael
by Schantate
Mercedes-Benz E350 V6-3.5L - 7,500 Miles Maintenance Service - Atlanta, Georgia
Michael was professional and knowledgeable about my 2008 Mercedes E350 4Matic. I currently have 214,000 miles on my car. Michael explained various aspects of my car and how to continue to maintain my vehicle's life. He was awesome!!!!

Andrew

11 years of experience
857 reviews
Request Andrew
Andrew
11 years of experience
Request Andrew
by Ahmed
Mercedes-Benz R350 V6-3.5L - Power Steering Pump - Kansas City, Missouri
The best

Anthony

28 years of experience
113 reviews
Request Anthony
Anthony
28 years of experience
Request Anthony
by Gavin
Mercedes-Benz C300 V6-3.5L - Oil Change - Bellport, New York
Top service. Always good to see someone who loves what they do execute their work. I feel comfortable when Anthony works on my vehicle because I trust that he knows what he is doing. He speaks with ease about what he does and confidence. You can tell he has been doing this long enough to be considered an expert.

Excellent Rating

(5,626)
Rating Summary
5,236
189
54
28
119
5,236
189
54
28
119
Number of Mercedes-Benz services completed
61886+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mercedes-Benz MECHANICS
1100+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

4 Essential Things to Know About Car Sharing
Car Car sharing is a service that drivers can sign up for that allows them to essentially share a car with other drivers. They simply set up a time that they will require a vehicle, head to the location provided...
Read more
Windshield Laws in Kansas
If If you are a licensed driver, you already know there are many rules that you are required to follow when operating a vehicle on Kansas roads. However, motorists must also make sure that their vehicles are in compliance with...
Read more
P0711 OBD-II Trouble Code: Transmission Fluid Temperature Sensor Circuit Range/Performance
P0711 P0711 code definition The P0711 code is a generic powertrain code related to the transmission, including sensor failures and pressure faults. In this case, it means that the engine control module (ECM) or powertrain control module (PCM) has detected...
Read more

Engine idle fluctuates and dies.

This may be a result of a dirty or failing idle air control valve. The idle air control valve reads the air intake as it is mixed with fuel prior to being injected into the engine at low speeds and...
Read more

Cost estimate for rear main seal replacement

Billing question for to replace the rear main seal (rear crankshaft seal) on a 2003 Lexus GS300 with a L6-3.0L engine.
Read more

Car lost power while driving on highway and wont start now

There are several possible reasons for a vehicle to crank and not start (https://www.yourmechanic.com/services/car-is-not-starting-inspection). A bad fuel pump, clogged fuel filter, faulty injectors, bad ecu, failed ignition coil, or a malfunctioning sensor. It will first be necessary to figure out...
Read more
  1. Home
  2. Estimates
  3. Mercedes-Benz
  4. 500SEC
  5. Brake Drum Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com

Read FAQ
GET A QUOTE