Mazda B2600 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Mazda B2600 Brake Pad Replacement is $193 with $53 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Mazda B2600L4-2.6LService typeBrake Pads - Rear ReplacementEstimate$331.72Shop/Dealer Price$365.44 - $455.26
1991 Mazda B2600L4-2.6LService typeBrake Pads - Front ReplacementEstimate$538.13Shop/Dealer Price$638.00 - $933.48
1990 Mazda B2600L4-2.6LService typeBrake Pads - Front ReplacementEstimate$538.13Shop/Dealer Price$638.02 - $933.52
1991 Mazda B2600L4-2.6LService typeBrake Pads - Rear ReplacementEstimate$319.11Shop/Dealer Price$350.39 - $438.38
1992 Mazda B2600L4-2.6LService typeBrake Pads - Front ReplacementEstimate$538.13Shop/Dealer Price$639.50 - $936.10
1990 Mazda B2600L4-2.6LService typeBrake Pads - Rear ReplacementEstimate$319.11Shop/Dealer Price$350.58 - $438.72
1993 Mazda B2600L4-2.6LService typeBrake Pads - Front ReplacementEstimate$538.13Shop/Dealer Price$638.04 - $933.55
1993 Mazda B2600L4-2.6LService typeBrake Pads - Rear ReplacementEstimate$319.11Shop/Dealer Price$350.39 - $438.38
Show example Mazda B2600 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Mazda mechanics

Real customer reviews from Mazda owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Jeremiah

14 years of experience
87 reviews
Jeremiah
14 years of experience
Mazda B2600 L4-2.6L - Coolant is leaking Inspection - Spring, Texas
Arrived right on time. Very capable and personable. Would recommend and schedule again.

Jay

38 years of experience
1035 reviews
Jay
38 years of experience
Mazda B2600 L4-2.6L - Inspection / Diagnostics - Riverside, California
Jay was very professional and personable and he explained things in terms that were easy to understand. I highly recommend him

Javier

12 years of experience
59 reviews
Javier
12 years of experience
Mazda B2600 L4-2.6L - Engine is backfiring - Tomball, Texas
Javier contacted me because previous bookings ended earlier than scheduled and I was able to have him service my car before my book time which was fantastic! He was quick and knowledgeable and showed me what was wrong and answered all of my questions. I would definitely recommend him and we'll have him come service my vehicle once the parts are in.

Nick

15 years of experience
90 reviews
Nick
15 years of experience
Mazda B2600 L4-2.6L - Coolant is leaking - Sacramento, California
Very professionable

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Mazda B2600 services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Mazda MECHANICS
1100+
experts on our platform

Recent articles & questions

How Long Does a Key Fob Battery Last?
In order to get into a modern car, you will usually have to have the key fob that comes...
P0568 OBD-II Trouble Code: Cruise Control Set Signal Malfunction
P0568 P0568 code definition Cruise Control Set Signal Malfunction What the P0568 code means P0568 is an OBD-II generic code that the engine control module (ECM) or body control module (BCM) identified a voltage signal for more than 90 seconds...
How Long Does a Tailgate Locking Assembly Last?
For For those that own a truck the ability to stow items in the back is a huge draw. In order to keep all your items safe and secure a tonneau cover can be installed. This basically covers the back...

How do I use the car finder feature?

The car finder feature is useful when you can’t find your vehicle, such as when it is in a crowded parking garage, or it is dark out. To use the car finder feature, press the Lock button twice on the...

Problems with my CVT transmission.

Hi there. With the CVT system, there could be multiple internal transmission components or sensors that are causing this type of problem. However, it's also possible that simply flushing the transmission fluid and changing the filter would resolve this problem....

Hi the other day I started my car and almost all my oil came out at once I’m not sure what happened

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com