Lexus RX330 Check Engine Light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(9)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(9)

Check Engine Light is on Inspection Service

How much does a Check Engine Light is on Inspection cost?

On average, the cost for a Lexus RX330 Check Engine Light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Lexus RX330V6-3.3LService typeCheck Engine Light is on InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2005 Lexus RX330V6-3.3LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2006 Lexus RX330V6-3.3LService typeCheck Engine Light is on InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Lexus RX330 Check Engine Light is on Inspection prices

The Check Engine Light can be one of the most confusing warnings in your dashboard cluster because it offers no explanation as to why you suddenly need to check your engine. It sounds ominous and can be as serious as a malfunctioning catalytic converter or as trivial as a loose gas cap.

How this system works:

The Check Engine Light location and color will vary by vehicle, but in most cases it is a dashboard warning light that is yellow and shaped like an engine. It may or may not have the word “check” integrated into the design.

This indicator is part of the onboard diagnostics (OBD-II) system and in all cases it indicates a problem with your emissions system. Basically, it is an emissions monitoring system. A Check Engine indicator will stay solid or blink.

  • If the indicator is blinking, the situation is usually serious, such as a severe misfiring of the engine. This would allow unburned fuel to dump into the exhaust system, pushing the temperature of your catalytic converter to the breaking point. Slow the car down, find a safe place to stop, and request a mechanic to perform a diagnosis.

  • A steady light on the other hand is not an emergency situation. You can continue driving, but you should schedule an appointment with a mechanic as soon as possible.

Common reasons for this to happen:

While a Check Engine Light can come on for a number of reasons, in most cases it is due to one of the following issues:

  • Loose or damaged gas cap: It’s hard to believe that a gas cap can prompt your check engine light to come on, but it can. Your gas cap acts as the seal for your fuel system and it helps maintain the pressure in your fuel tank. A loose or damaged cap can reduce your gas mileage and increase emissions from your car.

When that annoying yellow light pops on, the first thing you should do is pull over and inspect your gas cap. If it is loose, a quick tighten could very well solve your problem. If it is damaged, head to your local auto parts store for a new one.

Once you have fixed the issue, continue driving to see if the check engine light turns off. If the light stays on, schedule an appointment with a mechanic.

  • Faulty oxygen sensor: An oxygen sensor monitors the exhaust for unburned oxygen, which indicates engine efficacy and the proper air-to-fuel ratio. If you have a faulty sensor, it will not provide the correct data to the onboard computer. The majority of vehicles have two to four sensors. The OBD II code will tell the mechanic which one is giving a reading that is outside of its parameters.

Deterioration of the precious metals inside the oxygen sensor affects the sensors’ ability to give an accurate reading. If you put off getting an oxygen sensor replaced, it will eventually damage your catalytic converter, which can be very costly to replace. Your best bet is to call a mechanic and get a proper diagnosis.

  • Failing catalytic converter: A catalytic converter helps reduce emissions in the exhaust gases. It converts the carbon monoxide and other harmful gases into less harmful emissions. A failing converter will negatively affect your gas mileage and when the damage becomes severe enough, your vehicle won’t go any faster when you push down harder on the gas pedal.

In most cases, a catalytic converter will not fail if you properly maintain your car. A failing converter can be the result of a faulty oxygen sensor that has not been replaced or any other engine efficacy issue.

A broken catalytic converter will eventually bring your car to a complete stop. Before that, your gas mileage will be horrid, the car will not run smoothly, and the car will not pass an emissions test. A damaged converter should be replaced immediately.

  • Faulty mass airflow sensor: This part directs the computer in your vehicle to add the correct amount of fuel based on the air that is coming through the engine. When a mass airflow sensor starts to fail, the car will stall, it will idle poorly, the emissions will go up, and your gas mileage will go down.

An air filter that has never been replaced or improperly installed can sometimes be the culprit when it comes to a faulty mass airflow sensor. Have your air filter checked and replaced on a yearly basis.

While it is possible to drive for months with a malfunctioning mass airflow sensor, it’s not a good idea. Your gas mileage will drop and the car will start stalling frequently. It is best to call a mechanic and have the sensor diagnosed and replaced if necessary.

  • Bad spark plugs and wires: A spark plug acts as a seal in the combustion chamber and provides the gap for the spark that causes combustion in the engine.


While newer cars can go 100,000 miles on a set of plugs, older vehicles, especially those built before 1996, require new plugs roughly every 30,000 miles. There is no way to prevent plugs from failing, it just happens over time. If spark plugs are your issue, get them replaced immediately. A mechanic can make quick work of the job and new plugs in most cases are very affordable.

What to expect:

A top-rated mobile mechanic will come to your home or office to identify the source and cause of the illuminated Check Engine Light, and then check other system components as specific symptoms and issues are identified.

After the inspection, the mechanic will provide a detailed report that describes the diagnosis, along with the scope and cost of the necessary repairs.

How it's done:

When the Check Engine Light is on, your car’s monitoring system will have "fault codes" that indicate the nature of the problem. Your car may have one or more problems and hence there can be multiple codes.

The mechanic will read the codes using a scanner, interpret the codes, and provide a diagnosis. If you approve the repair estimate, they will replace the faulty part(s), clear the memory of any fault codes, turn the Check Engine Light off, and let you drive the car for a few days to see if the light comes back on or not.

Please note: It may take several days of driving the car for the monitoring system to verify that the repair has fixed all the problems. If the monitoring system fails any of its internal tests, it will turn the light back on. This means that the car has more problems that were not evident during the first evaluation. The mechanic will have to perform further diagnosis and create new repair estimates for resolving the problems found. In some rare cases, multiple visits may be required to diagnose and resolve the stubborn Check Engine Light issues.

How important is this service?

A blinking Check Engine Light indicates a critical issue, whereas a solid light reflects a non-emergency situation. Once you rule out a loose gas cap, it’s imperative a mechanic diagnoses the issue as soon as possible.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(9)

Rating Summary
8
0
0
1
0
8
0
0
1
0

Noe

36 years of experience
604 reviews
Noe
36 years of experience
Lexus RX330 V6-3.3L - Check Engine Light is on - Bellevue, Washington
Noe was very professional and extremely knowledgeable. I was 100% confidant in his skill not only in diagnosing the issue, but fixing it as well.

Francisco

10 years of experience
174 reviews
Francisco
10 years of experience
Lexus RX330 V6-3.3L - Check Engine Light is on - Huntington Beach, California
Francisco goes above and beyond his professional capabilities to assist you anyway he can. I would definitely highly recommend him to anyone using services for their car.

Leslie

25 years of experience
2 reviews
Leslie
25 years of experience
Lexus RX330 V6-3.3L - Check Engine Light is on - Dickinson, Texas
Insanely fast, professional, helpful beyond just the initial problem. Cannot say enough good things about this guy. A+

Brandon

18 years of experience
275 reviews
Brandon
18 years of experience
Lexus RX330 V6-3.3L - Check Engine Light is on - Duluth, Georgia
as usual, arrived on time and finished the work. Highly recommend Brandon.

Excellent Rating

(9)

Rating Summary
8
0
0
1
0
8
0
0
1
0
Number of Lexus RX330 Check Engine Light is on Inspection services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Check If Your Tires Are in Good Condition
Tires Tires are the foundation on which your car or truck rests. Checking if your tires have good tread and suitable pressure will improve your car's handling, gas mileage, and general tire life. Here's how: Assess how much tread is...
How to Clean an Idle Air Control Valve
Maintenance of an idle air control valve includes cleaning it from time to time to ensure it lasts long. It keeps your car idle level at normal.
How Much Does a Mechanic Make in California?
Automotive technician jobs in California have an average salary of $44K, and the state industry is growing rapidly.

Car won't accelerate after stop

If the vehicle is not moving when you press on the gas pedal, it is possible that the transmission may be slipping. I would recommend having professional technician, such as one from YourMechanic, test your vehicle's acceleration (https://www.yourmechanic.com/services/car-does-not-move-when-i-step-on-the-gas-pedal-inspection) so that...

I have a 2004 Chevy impala that doesn't move when it's in drive an i step on the gas peddle. Why?

This may be a number of different possibilities, however it sounds like it may be related to a transmission problem. This can happen for a few different reasons such as low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a faulty control solenoid. An...

I just installed a new fuel pump on my 1995 f150 xl.. I had thought the pump was bad.. But come to find out that there is no power

Hi Micah. Thanks for contacting us today. Typically, when you have an issue like this, it's caused by either an exposed electrical wire that is creating a short or a blown fuse/relay. The best advice I can offer is for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com