Lexus RC350 Grease on inner edge of tires Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Grease on inner edge of tires Inspection Service

How much does a Grease on inner edge of tires Inspection cost?

On average, the cost for a Lexus RC350 Grease on inner edge of tires Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2021 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2018 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2015 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2019 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2017 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2016 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2020 Lexus RC350V6-3.5LService typeGrease on inner edge of tires InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Lexus RC350 Grease on inner edge of tires Inspection prices

Grease is an important protectant for many parts of your car. While it isn’t used in your engine, it is used in several other areas, including the CV joints on your axles, as well as the grease fittings on your suspension (many newer cars have sealed fittings that aren’t serviceable today). It’s also used in rear-wheel drive applications – a truck’s driveshaft may have one or even two grease fittings. However, if you’re noticing grease on the inner edge of your tires, it means that something has potentially gone wrong.

How this system works:

There are a couple of places that grease on the inner edge of your tires might have come from. The most likely is from the CV joint. CV axles, or constant velocity axles, are used in front-wheel drive cars to connect the wheel hubs to the transmission. They have two joints, one close to either end. The joints are made to be flexible, so that your car can travel over bumps and dips easily without losing traction.

The joints are flexible, and include moving parts. To protect them from damage from dust, debris and other threats, they’re covered by rubber “boots” filled with grease. This ensures that they’re constantly lubricated, and that dust and debris cannot enter and damage the joints.

However, over time, your boots wear. The rubber can become brittle from age, and can crack. Boots can also be torn through impact with debris in the road and more. When this happens, the grease can leak out, and dirt and debris can enter the joint.

Common reasons for this to happen:

  • Blown CV Boot: If you’ve noticed grease on the inner edge of your tires, there’s a chance that one of your CV boots has blown and is leaking grease out. This is a serious situation. Without grease, the joint is not properly lubricated. Even more worrying, dirt and debris can enter the CV joint and cause serious damage, requiring the entire joint to be replaced. If the situation is caught early, it’s possible that only the boot will need to be replaced.

  • Damaged Grease Fitting: Some vehicles have grease fittings on their suspension system that enable moving parts to move more easily with lubrication. If one of these is damaged, it’s possible that some of the grease may leak onto the edge of your wheel from a nearby grease fitting.

  • Recent Lubrication of Grease Fittings: Once upon a time, an “oil and lube” service really lived up to its name, with all of a car’s grease fittings being lubricated during normal maintenance. With most newer cars now having sealed systems, this has become less common. However, if your car has serviceable fittings, it’s possible that grease from a recent service somehow ended up on the inner edge of the tire.

  • Recent CV Boot or Axle Replacement: If you’ve already had a CV boot blow out and the axle has been rebooted, or a new CV axle has been installed, it’s possible that the mechanic did not clean off the inner edge of the tire after the repair.

What to expect:

A top-rated mobile mechanic will come to your home or office to inspect the CV axles, boots, grease fittings and more. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your CV axles and boots, as well as any grease fittings on your front suspension in order to determine the source of the grease on the inner edge of your tires. The mechanic may also need to test drive the vehicle to test for symptoms of a failed CV joint, which include clicking during turning, or a vibration while driving.

How important is this service?

If the problem is with your CV boots, having the situation corrected is critical. While it’s possible to reboot a CV axle before the boot blows entirely, or immediately afterward, any use of the vehicle with the boot blown can contaminate the CV joint with dust and dirt. This will eat into the joint itself, causing irreparable damage and requiring the entire axle to be replaced. If you’ve noticed grease on the inner edge of your tires, one of our professional mechanics can diagnose and repair the condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Luis

29 years of experience
94 reviews
Luis
29 years of experience
Lexus RC350 V6-3.5L - Brake Pads Replacement (Front, Rear) - Schaumburg, Illinois
Luis was great. He arrived on time, worked efficiently and was very knowledgable.

Mitchel

24 years of experience
239 reviews
Mitchel
24 years of experience
Lexus RC350 V6-3.5L - Pre-purchase Car Inspection - Hialeah, Florida
Called me before and after the service was performed as requested. Highly recommend.

Scott

22 years of experience
49 reviews
Scott
22 years of experience
Lexus RC350 V6-3.5L - Brake Pads Replacement (Front) - Phoenix, Arizona
Major Shou-Out to Scott, Excellent customer service. Thanks for the suggestion regarding what needs to fix on my car.. No more Lexus dealer trips for me.... Thanks

Jake

8 years of experience
21 reviews
Jake
8 years of experience
Lexus RC350 V6-3.5L - Oil Change - Gilbert, Arizona
Major Shou-Out to JP (Jake) Excellent customer service. Jake did a very detailed check-Up for my car and patiently explained to me my car’s condition. No more Lexus dealer trips for me.... Thanks Bro!!!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Lexus RC350 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How Does Power Steering Impact a Vehicle’s Handling?
Many cars today, and almost all trucks and utility vehicles, feature power steering. Power steering (also known as...
P3458 OBD-II Trouble Code: Cylinder 8 Deactivation/Intake Valve Control Performance
P3458 means that the MAF, MAP, or TP sensors have detected a problem with the cylinders due to electrical, sensor, or oil pressure issues.
P2300 OBD-II Trouble Code: Ignition Coil A Primary Control Circuit Low
P2300 means the battery voltage sent to the ignition coil is not correct due to faulty coil, circuit wires, or faulty PCM .

Jeep is throwing code p0441 and code 13. Checked front hoses. OK. Evap leak? Any help?

Hi - the P0441 code indicates that there is no flow of fumes detected from the gas tank/evap cannister to the engine. This could be caused by a faulty leak detection pump in the gas tank, failed purge valve, bad...

Cost to replace engine in a 2002 BMW 325i

Hi Ernesto. Thanks for sending in your question. Unfortunately, replacing an engine is not a service our mobile mechanics could offer, so you'll have to contact a local BMW specialist to receive an estimate for replacing the engine on your...

2011:C300 in limp mode

The power train warning light or “limp mode” light generally will come on when the computer has detected a fault within the transmission control system. When this happens, the transmission control system puts the vehicle into a "limp mode" which...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com