Lexus IS300 Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(124)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(124)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Lexus IS300 Throttle Body Replacement is $1504 with $1308 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Lexus IS300L6-3.0LService typeThrottle Body ReplacementEstimate$2832.92Shop/Dealer Price$3495.72 - $5464.28
2004 Lexus IS300L6-3.0LService typeThrottle Body ReplacementEstimate$2820.31Shop/Dealer Price$3478.78 - $5444.09
2002 Lexus IS300L6-3.0LService typeThrottle Body ReplacementEstimate$2820.31Shop/Dealer Price$3478.84 - $5444.20
2005 Lexus IS300L6-3.0LService typeThrottle Body ReplacementEstimate$2820.31Shop/Dealer Price$3478.84 - $5444.19
2001 Lexus IS300L6-3.0LService typeThrottle Body ReplacementEstimate$2820.31Shop/Dealer Price$3482.45 - $5450.51
Show example Lexus IS300 Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Lexus mechanics

Real customer reviews from Lexus owners like you.

Excellent Rating

(124)

Rating Summary
118
3
1
2
0
118
3
1
2
0

David

16 years of experience
93 reviews
David
16 years of experience
Lexus IS300 L6-3.0L - Throttle Body - Brentwood, California
I’ve used Yourmechanic a few times now and they continue to employ awesome mechanics! David is awesome!

Edgar

15 years of experience
38 reviews
Edgar
15 years of experience
Lexus IS300 V6-3.5L - Oil Change - Union City, New Jersey
Great work and very friendly

Wilson

14 years of experience
296 reviews
Wilson
14 years of experience
Lexus IS300 L6-3.0L - Car is not starting - Casselberry, Florida
Perfect 10.

Alfred

32 years of experience
86 reviews
Alfred
32 years of experience
Lexus IS300 L6-3.0L - Oil Change - San Diego, California
showed up late, had to leave to get more oil, did not return for over 60 minutes. I had to caal just to find out if he was coming back

Excellent Rating

(124)

Rating Summary
118
3
1
2
0
118
3
1
2
0
Number of Lexus IS300 services completed
1364+
services done by our mechanics
TOTAL NUMBER OF EXPERT Lexus MECHANICS
1100+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Tire Air Pump
Owning Owning a car means an air pump is a great investment. It’s essential to keep your tires at the proper air pressure in order to protect them, your vehicle, and yourself. An air pump lets you do so without...
How to Replace a Power Steering Belt
Common signs of a failing power steering belt include a squealing noise and visible cracks, cuts, or nicks on the serpentine or drive belt.
P0929 OBD-II Trouble Code: Gear Shift Lock Solenoid Circuit Range/Performance
P0929 means there is an issue with the gear shift lock solenoid circuit, possibly due to fluid or battery voltage issues, or faulty wiring.

Why my turn signals don't work?

If both rear turn signal lights are not working correctly, it's most likely due to an electrical relay or fuse that supplies power to the tail lights. However, if it's a fuse, it's likely that the parking lights (when you...

Biased pre-purchase mechanic evaluation.

Hi there. I don't think you're going to have any issues with our professional mobile mechanics having any bias; especially if the car is from a dealership. Many of our mobile mechanics are former dealer mechanics who saw the benefits...

Hello ben my car is making like a crack noise or some kind of noise everytime i turn and or accelerate. rattling coming from back

Hi Alex. Cracking noises are typically caused by metal to metal contact or a bushing that is pinching between metal components. On the front suspension, there are a few possible sources including steering stabilizer bar bushings, tie rod bushings, lower...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com