Jeep Grand Wagoneer L Parking brake won't engage Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(7,424)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(7,424)

Parking brake won't engage Inspection Service

How much does a Parking brake won't engage Inspection cost?

On average, the cost for a Jeep Grand Wagoneer L Parking brake won't engage Inspection is $140 with $0 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2023 Jeep Grand Wagoneer LL6-3.0L TurboService typeParking brake won't engage InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
2024 Jeep Grand Wagoneer LL6-3.0L TurboService typeParking brake won't engage InspectionEstimate$145.99Shop/Dealer Price$147.82 - $149.20
Show example Jeep Grand Wagoneer L Parking brake won't engage Inspection prices

Engaging your parking brake ensures that your car doesn’t roll when you park on a hill. This is important in a wide variety of situations, whether you’re parking at home and your driveway is angled, or you’re backing down a boat ramp to unload in the lake. If your parking brake won’t engage, then you’re relying solely on the transmission’s park setting to hold the vehicle in place, which is never a good thing. It could slip, and it could also cause damage to the transmission.

How this system works:

Most parking brakes are relatively simple affairs – really nothing more than a cable that attaches to the handle that sits between your front seats (or the parking brake pedal under the dash in some cars). Pulling the handle pulls the cable, which engages the parking brake assembly and pushes a pair of brake shoes into contact with the inside of the drum.

However, despite that simplicity, there are several things that could go wrong with your parking brake. The most common issue is simply that you need to adjust your brake shoes. However, there could be a problem with the cable (corrosion or wear, for instance), or there could be a problem with the handle itself, although this is rare.

Common reasons for this to happen:

  • Need to Adjust Brake Shoes: The single most common reason your parking brake won’t engage is a need to adjust the brake shoes. This requires removing the rear wheels, removing the drum, and then adjusting the wheel to spread the shoes apart. Both sides should be adjusted.

  • Cable Is Detached: Another potential reason here is that the cable may have come loose from one or both sides. The cable must attach to both rear brakes for your parking brake to work (if it attaches to just one side, the brake will engage but feel loose, and the car will roll on a hill).

  • Cable Is Loose at the Handle: A much less common problem is that the nut where the cable attaches under the handle is loose. If this happens, there will be slack in the cable, and pulling the handle will not engage the parking brake. This is most common after inexpert parking brake repairs.

  • Rusted Bell Crank: The bell crank is really nothing more than a lever that sits near the front of the parking brake assembly. These are prone to rusting, particularly if you don’t use your parking brake very often. If this is the case, your parking brake will not engage.

What to expect:

One of our experienced mobile mechanics will come to your home or office and inspect the entire parking brake system, from the handle to the bell crank, the cabling and the attachment points at the rear. The mechanic will also provide you with a full report that details the scope and cost of any necessary parts and repairs.

How it's done:

The mechanic will inspect all aspects of your parking brake, beginning with the handle or pedal in the cabin. The mechanic will also inspect the cables, the shoe condition and adjustment and other aspects of your parking brake system. It may be necessary to remove one or both rear wheels, as well as the brake drums (if your car has drum brakes). If your car has disc brakes, the caliper and rotor may need to be removed to inspect the parking brake shoes, which are located inside the built-in drum on the rotor itself.

How important is this service?

If your parking brake will not engage, it will not prevent you from driving, but it does make parking on an incline risky. It’s possible that the transmission will slip out of park, and the vehicle will roll down the slope. One of our mechanics can fully assess your parking brake and advise you on what is needed to repair it.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Jeep mechanics

Real customer reviews from Jeep owners like you.

Excellent Rating

(7,424)

Rating Summary
7,058
200
38
25
103
7,058
200
38
25
103

Victor

36 years of experience
230 reviews
Victor
36 years of experience
Jeep Liberty V6-3.7L - Oil/Fluid Leak - Rio Rancho, New Mexico
Great guy. Got right to it. Diagnosed well. Couldn't be happier.

Robert

19 years of experience
68 reviews
Robert
19 years of experience
Jeep Grand Cherokee L6-4.0L - Steering Rack/Gearbox - Phoenix, Arizona
Excellent customer service and knowledge of his field.

Robert

12 years of experience
20 reviews
Robert
12 years of experience
Jeep Grand Cherokee V6-3.6L - Thermostat - Walnut, California
Great service

Russell

25 years of experience
356 reviews
Russell
25 years of experience
Jeep Compass * - Alternator - Beaverton, Oregon
Right on time and finished the job when he said he would.

Excellent Rating

(7,424)

Rating Summary
7,058
200
38
25
103
7,058
200
38
25
103
Number of Jeep services completed
81664+
services done by our mechanics
TOTAL NUMBER OF EXPERT Jeep MECHANICS
1300+
experts on our platform

Recent articles & questions

P2295 OBD-II Trouble Code: Fuel Pressure Regulator 2 Control Circuit Low
P2295 P2295 code definition Fuel pressure regulator 2 control circuit low What the P2295 code means This trouble code indicates that the powertrain control module has detected a low reference voltage from the fuel pressure regulator circuit. What are the...
How to Replace an Exhaust Clamp
An exhaust pipe is supported by exhaust clamps within a vehicle. A bad clamp can lead to exhaust leaks that can turn hazardous if not addressed.
2012 Mazda CX-5 vs. 2012 Toyota RAV4: Which One Should I Buy?
Mid-size crossover SUVs are an excellent option when you need to take several friends along with you, or bring your kids along and yet still need to keep a tight leash on your purchase cost as well as your ongoing...

Heat working, but AC doesn't

The AC on this car is known to have one or more of many possible failures from the compressor, from lines leaking, to control module problems. I recommend that you have a mechanic, like the ones from YourMechanic, do a...

Car is leaking coolant, and overheating, is it the intake manifold gasket?

This may be related to a few different things such as a bad thermostat (https://www.yourmechanic.com/services/thermostat-replacement), a failing coolant fan relay, or a blown head gasket. As you may know the thermostat regulates the flow of coolant in and out of...

Have a land rover free lander 2003, bought it last weekend brought it home no problem, recent seviced, yesterdy when i pulled up outside my house the engine management light came on and i didnt use it again until this morning, i got in it and when i turned the ignition it made a clunk noise and then wouldnt turn over but made a whinning noise each time i turned the key. a couple of points, when i collected the car last sunday the man said he had done oil and water etc, so i had no reason to check, however for some reason this motring i decided to check and there was oil but no water !!!! my fault for not checking when i collected, second point is that since picking it up i have had trouble with the alarm and immobilizer it takes several attempts to disarm the jeep and several combinatioona of the fob and key then eventually it will dis arm it could be posible the immobilizer isnt fully disarming or battery/alternator/starter issues ?

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com