Isuzu Rodeo Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(175)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(175)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Isuzu Rodeo Fuel Injector Replacement is $877 with $737 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Isuzu RodeoL4-2.2LService typeFuel Injector ReplacementEstimate$2123.20Shop/Dealer Price$2618.85 - $4097.70
2002 Isuzu RodeoL4-2.2LService typeFuel Injector ReplacementEstimate$2114.19Shop/Dealer Price$2608.07 - $4085.60
1991 Isuzu RodeoV6-3.1LService typeFuel Injector ReplacementEstimate$1620.61Shop/Dealer Price$1991.12 - $3098.48
1999 Isuzu RodeoV6-3.2LService typeFuel Injector ReplacementEstimate$2698.64Shop/Dealer Price$3300.55 - $5097.53
2003 Isuzu RodeoL4-2.2LService typeFuel Injector ReplacementEstimate$2114.19Shop/Dealer Price$2609.57 - $4088.22
2004 Isuzu RodeoV6-3.2LService typeFuel Injector ReplacementEstimate$3585.44Shop/Dealer Price$4409.35 - $6871.64
2004 Isuzu RodeoV6-3.5LService typeFuel Injector ReplacementEstimate$4506.50Shop/Dealer Price$5560.41 - $8713.30
1993 Isuzu RodeoV6-3.2LService typeFuel Injector ReplacementEstimate$2636.27Shop/Dealer Price$3187.95 - $4830.05
Show example Isuzu Rodeo Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(175)

Rating Summary
160
8
0
1
6
160
8
0
1
6

Travis

16 years of experience
165 reviews
Travis
16 years of experience
Isuzu Rodeo V6-3.2L - Intake Manifold Gaskets - Flower Mound, Texas
Travis went the extra mile with his work. I had this exact job done 18 months ago by a b&m shop. Not only did they cost more, but they did a bad job. Travis pointed out the method of repair the other guys used on a bad o-ring and repaired it properly. I highly recommend Travis for anyone on a budget and wants excellent service.

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Isuzu Rodeo V6-3.2L - Exhaust Gas Recirculation/EGR Valve - San Antonio, Texas
Very polite and professional. Gave me a quote and helped me prioritize the work.

Justin

17 years of experience
88 reviews
Justin
17 years of experience
Isuzu Rodeo V6-3.2L - Battery Light is on - Rancho Cordova, California
Justin was great very knowledgeable, diagnosed the problem and made sure he got the right parts for the job. Ended up paying less than what was quoted.

Timmy

11 years of experience
43 reviews
Timmy
11 years of experience
Isuzu Rodeo V6-3.2L - Brake Pads Replacement (Front) - Memphis, Tennessee
He was great! Friendly and on time. Did a great job. Thanks

Excellent Rating

(175)

Rating Summary
160
8
0
1
6
160
8
0
1
6
Number of Isuzu Rodeo services completed
1925+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

10 Best Work Boots for Auto Mechanics
Automotive technician jobs require footwear that provide safety, durability, and comfort. Work boots that are fit for mechanics start around $84.
New York Parking Laws: Understanding the Basics
If If you are a licensed driver in the state of New York, you are likely well aware of the various laws regarding the roads. You know the speed limits and you know the proper way to pass vehicles on...
How Long Does a Horn Relay Last?
Having Having a fully functional horn is an essential part of staying safe while driving. The horn on your vehicle will allow you to alert other drivers of your presence and can be used to prevent accidents in some instances....

What can I do if the remote keyless entry remote only works up close?

The remote keyless entry system is not only a great convenience, but it increases vehicle security by being able to lock or unlock the doors from a distance. If the range of the remote decreases, there are a few points...

rattling noise when turning on a.c. then later stops making noise

Hello there, many faults will cause a rattling noise when the AC is turned on in your 1997 Lexus ES300. The most common would be the belt tensioner, idler pulley, AC clutch, AC compressor, or the belt itself. When the...

I drive a 2012 Nissan Altima. I was driving uphill yesterday but I noticed a strange sound

It could be that the automatic transmission is either slipping or that it is staying in low gear. The car has enough miles on it to be having that sort of trouble. It's difficult to say anything specific from this...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com