Isuzu Axiom Ignition Switch Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(13)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(13)

Ignition Switch Replacement Service

How much does a Ignition Switch Replacement cost?

On average, the cost for a Isuzu Axiom Ignition Switch Replacement is $293 with $139 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2002 Isuzu AxiomV6-3.5LService typeIgnition Switch ReplacementEstimate$447.72Shop/Dealer Price$520.99 - $731.87
2003 Isuzu AxiomV6-3.5LService typeIgnition Switch ReplacementEstimate$789.51Shop/Dealer Price$948.76 - $1421.96
2004 Isuzu AxiomV6-3.5LService typeIgnition Switch ReplacementEstimate$720.81Shop/Dealer Price$862.91 - $1284.61
Show example Isuzu Axiom Ignition Switch Replacement prices

What is the Ignition Switch all about?

The ignition switch, located on the steering column or in the dashboard, takes the power from the battery and directs it to all the accessories and electrical components of your car. It also transfers the power to the starter when you turn the ignition key. If the starter does not receive power from the ignition key, the car will not start. When the ignition switch goes bad, your car may not start and the accessories (lights, radio, etc.) may not work. Replacing an ignition switch can be as simple as removing a few screws to access the ignition switch, or as complicated as removing the whole steering column.

Ignition Switch

Keep in mind:

  • After an ignition switch is replaced, all electrical components should be checked to ensure proper operation.

How it's done:

  • Check the condition of the ignition switch.
  • Remove and replace the ignition switch if it is bad.
  • Verify operation of electrical components.

Our recommendation:

The battery feeds power to ignition switch, so it is important for the ignition system that the battery is in good condition. Don't put too much weight on your key ring because this can damage the key and the tumbler part of the ignition switch. If there is no power inside the car (none of the electrical components are working), have the mechanic inspect the main fuses. If the fuses are good, then the mechanic should inspect the ignition switch and other electrical components.

What common symptoms indicate you may need to replace the Ignition Switch?

  • Car may not start.
  • Car starts then dies.
  • Some electrical components may not work (radio, clock, lights, etc.).

How important is this service?

The ignition switch serves to send power from the battery. When you turn your key to turn on your vehicle, the ignition switch takes power from the battery and sends it to the starter, which allows your vehicle to turn on. When you turn on any electrical components in your vehicle (such as your lights, radio, and air conditioning), the ignition switch draws power from the battery, and sends it to these electrical components to power them. When your ignition switch stops working, your starter and your electrical components have no way of drawing power from your battery. With a faulty ignition switch, you won’t be able to use your radio, lights, or air conditioning, and you won’t be able to turn on your vehicle. In extreme cases, a broken ignition switch won’t allow you to turn your vehicle off, even if you remove the key.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Isuzu mechanics

Real customer reviews from Isuzu owners like you.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0

Luis

16 years of experience
244 reviews
Luis
16 years of experience
Isuzu Axiom V6-3.5L - Mass Airflow Sensor - Las Vegas, Nevada
Luis is a great mechanic who gets the job done in a timely and professional manner. I was so impressed with his services that I booked him for a future appointment to perform more work on my car.

Nicholas

12 years of experience
691 reviews
Nicholas
12 years of experience
Isuzu Axiom V6-3.5L - Car does not shift from park to drive - Durham, North Carolina
Nick was great.

Robert

21 years of experience
1307 reviews
Robert
21 years of experience
Isuzu Axiom V6-3.5L - Engine is misfiring - Lafayette, Colorado
P;rofessional and knowledgeable.

Jerome

35 years of experience
206 reviews
Jerome
35 years of experience
Isuzu Axiom V6-3.5L - Brake Master Cylinder - District Heights, Maryland
Did a great job and is a very nice person.

Excellent Rating

(13)

Rating Summary
12
1
0
0
0
12
1
0
0
0
Number of Isuzu Axiom services completed
143+
services done by our mechanics
TOTAL NUMBER OF EXPERT Isuzu MECHANICS
200+
experts on our platform

Recent articles & questions

P2282 OBD-II Trouble Code: Air Leak Between Throttle Body and Intake Valves
P2282 P2282 code definition Air Leak Between Throttle Body and Intake Valves What the P2282 code means P2282 is an OBD-II generic code for the engine control module (ECM) monitoring the vacuum in the intake manifold at idle. This code...
B2104 OBD-II Trouble Code: Door Passenger Key Cylinder Switch Failure
B2104 trouble code means there's a failure in the passenger door key cylinder switch, caused by a failed component in the switch.
How to Replace a Combination Switch Assembly
Combination switches include the control of turn signals, windshield wipers, windshield washers, and high beams. Faulty switches can cause accidents.

How do I access the elapsed time feature?

The elapsed time feature displays how much time has eclipsed since the feature was reset. The feature can run for up to 100 hours, at which point it will automatically reset. To access the elapsed time, press the Trip button...

1996 Chevrolet Corvette cranks but won't start

There are a few possible causes for your concern. Your engine needs several things in order to run properly: Fuel from the fuel tank, spark from the ignition system to ignite the fuel, and pressure in the cylinders generated by...

Completely stopped running, does not turn on or do anything. What could it be?

You stated that you replaced a blown fuse. This fuse can be the circuit that is having a short circuit. You should have a mechanic come and scan the computer to see if there is codes in memory. The problem...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com