Hyundai Santa Cruz Gears slipping when accelerating Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(8,035)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(8,035)

Gears slipping when accelerating Inspection Service

How much does a Gears slipping when accelerating Inspection cost?

On average, the cost for a Hyundai Santa Cruz Gears slipping when accelerating Inspection is $146 with $0 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2024 Hyundai Santa CruzL4-2.5L TurboService typeGears slipping when accelerating InspectionEstimate$174.99Shop/Dealer Price$170.49 - $167.12
2024 Hyundai Santa CruzL4-2.5LService typeGears slipping when accelerating InspectionEstimate$174.99Shop/Dealer Price$172.51 - $170.65
2023 Hyundai Santa CruzL4-2.5L TurboService typeGears slipping when accelerating InspectionEstimate$159.99Shop/Dealer Price$157.37 - $155.40
2023 Hyundai Santa CruzL4-2.5LService typeGears slipping when accelerating InspectionEstimate$159.99Shop/Dealer Price$161.51 - $162.65
Show example Hyundai Santa Cruz Gears slipping when accelerating Inspection prices

When you press the gas pedal and the transmission is in drive, you expect your vehicle to accelerate smoothly. That’s how things work when your transmission is healthy, but if you’re noticing that the gears are slipping when accelerating, there’s a serious problem that needs to be addressed as soon as possible.

How this system works:

Your transmission is a complex system with a very wide range of components. That’s true whether you have an automatic or a manual transmission. With that being said, slipping is much more common in an automatic transmission than in a manual, so we’ll focus our attention there. Really, the primary cause of slipping in a manual transmission is a damaged clutch, which should be replaced.

In an automatic transmission, everything must work in harmony in order to shift gears and provide power. The fluid level must be full (without the right amount of fluid, your transmission may slip badly), and it should be clean. You also have a number of clutch packs scattered throughout the transmission that need to engage at the right time. Transmission bands connect the gears together, and they can become worn or damaged over time.

If debris or contaminants clog up the system, or have blocked up the filter, it’s impossible for the transmission to work properly.

Common reasons for this to happen:

  • Low Transmission Fluid: If you’re of driving age, you’ve heard this one time and again, but it bears repeating. The number one cause of all transmission problems, from slipping to abnormal sounds, is low transmission fluid. If the fluid is low, a number of problems can crop up that will make the transmission slip, including overheating.

  • Fluid Is Burnt: Just as you need the right level of transmission fluid, you also need that fluid to be in good condition. Like engine oil, transmission fluid needs to be changed periodically, or it becomes burnt and the level of contaminants in the fluid can rise to dangerous levels.

  • Transmission Fluid Leaks: This one relates directly to low fluid, but it’s the cause of the transmission fluid being low. Transmission leaks can range from miniscule to catastrophic, but they all affect the level of fluid in your transmission.

  • Gear Wear: If you have a high-mileage vehicle with the original transmission, the gears may just be worn out. This applies even if you’ve taken care of the transmission with regular services. There are simply only so many miles the average transmission can operate. If your gears are worn, they won’t mesh together properly, creating slippage.

  • Broken Transmission Bands: Transmission bands connect the various gears in your transmission to one another. Over time (and particularly if you don’t maintain the transmission or drive with low fluid), they wear. Once they become too worn, or they break, your transmission will slip.

  • Failing Torque Converter: The torque converter is what transforms energy from the engine into something your transmission can use. They work with transmission fluid, so low fluid levels could cause damage here as well. Once the torque converter is damaged, your transmission will slip.

What to expect:

A top-rated mobile mechanic will come to your home or office to verify the operation of your transmission, including slipping and any abnormal noises. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your transmission and may need to pull trouble codes from the car’s computer via the OBD II interface. A test drive may also be necessary to verify that the transmission is slipping, as well as any unusual/abnormal sounds it might be making during operation.

How important is this service?

If your transmission is slipping, it’s crucial to have the problem repaired immediately. Even if it is slipping for something as simple as low fluid, that situation can quickly lead to very serious damage. One of our professional mechanics can diagnose the reason for the slippage and get your transmission back into good condition.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(8,035)

Rating Summary
7,618
241
46
33
97
7,618
241
46
33
97

Eliud

24 years of experience
312 reviews
Eliud
24 years of experience
Hyundai Elantra L4-1.8L - Gears slipping when accelerating - Conyers, Georgia
He was knowledgeable, kind and honest. He only had me pay for the work he did and he reassured me that my car is alright fo me now, which was my main concern.

Dan

40 years of experience
1080 reviews
Dan
40 years of experience
Hyundai Santa Fe V6-3.3L - Valve Cover Gasket - Buford, Georgia
Extremely professional! Great guy!

Gerson

11 years of experience
33 reviews
Gerson
11 years of experience
Hyundai Elantra L4-2.0L - Battery - Houston, Texas
Excellent service

Robert

43 years of experience
232 reviews
Robert
43 years of experience
Hyundai Accent L4-1.6L - Check Engine Light is on - Houston, Texas
Robert was able to find the problem in the first go...Worked very patiently and with complete job satisfaction.

Excellent Rating

(8,035)

Rating Summary
7,618
241
46
33
97
7,618
241
46
33
97
Number of Hyundai services completed
88385+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2010 Dodge Viper
2010 2010 was the last production year for the Dodge Viper before it took an extended leave of absence from the automaker’s lineup. It would debut once more in 2013. The 2010 Dodge Viper is a two-seat roadster (convertible) and...
What's the Difference Between Standard and Performance Air Filters?
Your Your air filter works to filter the air reaching the engine during combustion and protects it from dust, debris, dirt and bugs. From time to time, when the air filter gets clogged, you will need to replace or clean...
B1200 OBD-II Trouble Code: Climate Control Pushbutton Circuit Failure
B1200 means there is an electrical failure in one or more of the climate control system's pushbuttons, likely caused to a damaged pushbutton.

Car pulling when I change gears.

All the air that goes into the cars engine is metered. If there is unmetered air coming in somewhere it will be detected by the Oxygen sensors and a lean code will be set. A lean condition will cause a...

How do I turn the clock on or off?

The clock can be turned on or off easily and quickly: 1. Press the Trip Computer switch until the settings menu shows up 2. Rotate the Trip Computer switch to Clock, then press the switch. 3. Rotate the Trip Computer...

Will a purge solenoid eat up gas

If the he purge valve is open all the time it may cause the fuel tank to go into a vacuum and cause the gas to vaporize more than it should. You should not see very much loss of fuel...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com