Hyundai Entourage Camshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(55)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(55)

Camshaft Seal Replacement Service

How much does a Camshaft Seal Replacement cost?

On average, the cost for a Hyundai Entourage Camshaft Seal Replacement is $299 with $24 for parts and $275 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Hyundai EntourageV6-3.8LService typeCamshaft Seal ReplacementEstimate$381.31Shop/Dealer Price$422.28 - $479.91
2008 Hyundai EntourageV6-3.8LService typeCamshaft Seal ReplacementEstimate$323.31Shop/Dealer Price$364.33 - $422.00
2009 Hyundai EntourageV6-3.8LService typeCamshaft Seal ReplacementEstimate$323.31Shop/Dealer Price$364.32 - $421.99
2010 Hyundai EntourageV6-3.8LService typeCamshaft Seal ReplacementEstimate$323.31Shop/Dealer Price$364.26 - $421.88
Show example Hyundai Entourage Camshaft Seal Replacement prices

What is the Camshaft Seal all about?

Like the crankshaft, the camshaft is an essential component of the combustion process that moves your car down the road. Its motion is responsible for instigating valve movement, which regulates the air/fuel mixture that fuels the “big bang.” The camshaft uses lobes (called cams) to push against and open the valves as the camshaft rotates (springs on the valves return them to their closed position) in sync with the pistons. Note: Both valves are closed during compression and combustion so that the combustion chamber is sealed.

The camshaft seal fits between the camshaft and the cylinder head, sealing the camshaft between the top of the head and the valve cover. Like all of an engine’s internal moving parts, the camshaft must be well lubricated, essentially submerged in oil, to do its job properly. Without the camshaft seal, this lubricating oil would leak out of the engine block, befouling the engine bay and putting the engine’s internal components in danger from insufficient lubrication. It also keeps contaminants like dust and dirt from damaging the engine’s internal components.

Keep in mind:

  • Typically, camshaft seals do not need to be replaced unless other components, such as the camshaft, are being replaced.
  • Replace the timing belt when replacing the camshaft seals, and vice versa.
  • A leak from the camshaft seal or valve cover gasket are hard to tell apart if the valve cover gasket is leaking in the same area as the cam seal.

How it's done:

  • The battery is disconnected
  • The camshaft timing belt and gear is removed
  • The camshaft seal is replaced
  • The timing gear and timing belt is reinstalled
  • The battery is reconnected and timing checked and vehicle checked for leaks.

Our recommendation:

One of the most important parts of your car, the camshaft seal is made from a durable material, capable of withstanding extreme temperatures and pressures. But if it fails, replacement is the only cure. The good news is that the seal is a relatively inexpensive component, but note that replacing it can be a labor-intensive job.

What common symptoms indicate you may need to replace the Camshaft Seal?

  • Oil leaking from behind the timing cover.
  • The leak will eventually damage the car’s timing belt or cause it to slip, which will in turn throw the entire combustion process off kilter: the engine will run rough, there will be a noticeable loss of power, overheating issues, stalling and backfiring, excess smoke pouring out of the exhaust, and more.

How important is this service?

Loss of oil could cause the engine to seize, and a leak could develop into a potential fire hazard as the mixes with dirt and other contaminants. Replace the camshaft seal sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Hyundai mechanics

Real customer reviews from Hyundai owners like you.

Excellent Rating

(55)

Rating Summary
50
2
0
1
2
50
2
0
1
2

Luis

15 years of experience
189 reviews
Luis
15 years of experience
Hyundai Entourage V6-3.8L - Brake Pads Replacement (Front) - Las Vegas, Nevada
Expert mechanic. He knows what he is doing. I would definitely request him if I required any repair.

Junard

11 years of experience
161 reviews
Junard
11 years of experience
Hyundai Entourage V6-3.8L - Brake Pads Replacement (Front) - Philadelphia, Pennsylvania
Came on time and very knowledgeable. Definitely would use again

David

28 years of experience
142 reviews
David
28 years of experience
Hyundai Entourage V6-3.8L - Pre-purchase Car Inspection - El Cajon, California
Showed up early, seemed thorough, professional, didn't sweat the minor stuff.

Damian

11 years of experience
465 reviews
Damian
11 years of experience
Hyundai Entourage V6-3.8L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Oxon Hill, Maryland
Very knowledgeable and want the extra mile.

Excellent Rating

(55)

Rating Summary
50
2
0
1
2
50
2
0
1
2
Number of Hyundai Entourage services completed
605+
services done by our mechanics
TOTAL NUMBER OF EXPERT Hyundai MECHANICS
1300+
experts on our platform

Recent articles & questions

How to Buy Good Quality Long Range Car Lights
Your Your car is equipped with two types of headlight functionality – low beams, which are used for general driving, particularly in areas with streetlights and oncoming traffic, and high beams, which provide long range illumination. Buying quality long range...
How to Choose the Best Car Shipping Company
Getting Getting an automobile across a long distance can seem difficult to arrange since you only have a few options to choose from, including driving the vehicle yourself or having someone drive it for you. But a third option that...
P2405 OBD-II Trouble Code: EVAP Leak Detection Pump Control Circuit Low
P2405 code definition Evaporative Emission Control System (EVAP) Leak Detection Pump Control Circuit Low What the P2405 code means P2405 is an OBD-II generic code for the Engine Control Module (ECM) detecting that the evaporative system leak detection...

I have a problem with my front wheel bearings.

The front wheel bearings on this vehicle are known to get very noisy after getting some mileage on them. The only fix is to get the wheel bearings replaced (https://www.yourmechanic.com/services/wheel-bearings-replacement). The bearings are pressed in parts and a qualified mechanic...

Auxilliary plug not working

I would try plugging the chord in another plug just to make sure it is not the chord. The plugs are rather simple. The sides are the ground and only the very center piece at the very back of the...

I just had a tire replaced on the rear of the vehicle. Now I hear a "clicking" noise when I apply the brakes. What could the probl

Depending on if you have rear drum or disc brakes the noise is usually caused by a warped surface of the rotor or drum. The mechanic may have took off the rear drum to inspect the brakes and knocked out...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com