GMC Sierra 1500 HD Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(5)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(5)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a GMC Sierra 1500 HD Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 GMC Sierra 1500 HDV8-6.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2001 GMC Sierra 1500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 GMC Sierra 1500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 GMC Sierra 1500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2006 GMC Sierra 1500 HDV8-6.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
Show example GMC Sierra 1500 HD Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0

Scott

36 years of experience
899 reviews
Scott
36 years of experience
GMC Sierra 1500 HD V8-6.0L - Fan Clutch - Gilbert, Arizona
On time , fast clean work and great service.

Bryant

12 years of experience
600 reviews
Bryant
12 years of experience
GMC Sierra 1500 HD V8-6.0L - AC Belt - Indianapolis, Indiana
Great mechanic really knows his stuff. Deserves his pay.

Bryant

12 years of experience
600 reviews
Bryant
12 years of experience
GMC Sierra 1500 HD V8-6.0L - Car AC Repair - Indianapolis, Indiana
Great Mechanic Knows his stuff Worth the cost

Lavell

28 years of experience
236 reviews
Lavell
28 years of experience
GMC Sierra 1500 HD V8-6.0L - Check Engine Light is on Inspection - Orinda, California
Lavell was great, very knowledgeable and contextualized his findings so I could understand not just what he found, but also the corresponding implications.

Excellent Rating

(5)

Rating Summary
5
0
0
0
0
5
0
0
0
0
Number of GMC Sierra 1500 HD services completed
55+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

How Long Does a Reverse Light Bulb Last?
Your Your car is equipped with a wide range of lights, from the headlights to the taillights to the interior lights that help you see when getting in or out of the vehicle in the dark. This includes your reverse...
P2613 OBD-II Trouble Code: A/C Refrigerant Distribution Valve Control Circuit High
P2613 means a problem with the A/C refrigerant distribution valve control circuit which causes the air conditioning to not work properly.
How to Replace a Cruise Control Vacuum Reservoir
The cruise control system has a failing vacuum reservoir if the cruise control does not hold speed or you hear a hissing noise coming from the car.

Driver's side window not working.

A power window has several components, all of which will cause it to stop working. The switch, motor and the regulator. The switch is the button you press to make it go up and down. Since it is on the...

How do I program a new remote keyless entry (RKE) transmitter with a recognized transmitter?

If your vehicle has no remote keyless entry (RKE) transmitters that are currently programmed, then you will need to program all of your RKE transmitters. This process can take a while, but is easy to do if you follow these...

Getting a "Drivetrain Malfunction" light on a 2011 535i. Had a sensor replaced for almost $400 and that didnt fix the issue. wha

Hello. The drive train malfunction light indicates the computer has detected an issue with the vehicle's drive train or transmission. This can be caused by many things, ranging from a bad sensor, to the need for a new transmission. As...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com