GMC Hummer EV Pickup Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(3,262)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(3,262)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a GMC Hummer EV Pickup Windows Inspection is $146 with $0 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2022 GMC Hummer EV PickupElectricService typeWindows InspectionEstimate$155.00Shop/Dealer Price$158.60 - $161.30
Show example GMC Hummer EV Pickup Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert GMC mechanics

Real customer reviews from GMC owners like you.

Excellent Rating

(3,262)

Rating Summary
3,088
87
22
11
54
3,088
87
22
11
54

Vincent

22 years of experience
21 reviews
Vincent
22 years of experience
GMC K1500 Suburban V8-5.7L - Windows - Glendale, Arizona
Vincent was courteous, personable, and knowledgeable. He quickly went about his business and completed the repair.

Ben

42 years of experience
1589 reviews
Ben
42 years of experience
GMC C1500 V8-5.0L - Windows - Houston, Texas
Great mechanic

Mark

26 years of experience
55 reviews
Mark
26 years of experience
GMC K1500 Suburban V8-5.7L - Windows - Glendale, Arizona
He arrived on time, as usual, and quickly fixed the window.

Richard

21 years of experience
126 reviews
Richard
21 years of experience
GMC V1500 Suburban V8-5.7L - Car is shaking or vibrating - Haltom City, Texas
Very professional seem honest.

Excellent Rating

(3,262)

Rating Summary
3,088
87
22
11
54
3,088
87
22
11
54
Number of GMC services completed
35882+
services done by our mechanics
TOTAL NUMBER OF EXPERT GMC MECHANICS
900+
experts on our platform

Recent articles & questions

P0044 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 1 Sensor 3)
P0044 P0044 code definition P0044 is a specific code that is set when high voltage is found in the heater control circuit. This code may be seen with P0042 and P0043. What the P0044 code means P0044 is set by...
Plymouth Certified Pre-Owned (CPO) Car Program
Many Many drivers who are in the market for a used Plymouth vehicle want to consider a Certified Pre-Owned, or CPO, vehicle. CPO programs allow owners of used cars to drive with confidence, knowing that their vehicle has been inspected...
How to Replace an Oil Return Hose on Most Cars
The oil in the engine travels through oil return hoses which fail when there are cracks or bulges on the hoses or oil is leaking from the car.

Engine unable to run as it should

This is most likely from the fuel filter is clogged (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-fuel-filter) or the fuel pump (https://www.yourmechanic.com/article/how-can-you-tell-that-your-fuel-pump-isn-t-working) needs to be replaced. The fuel pump may loose pressure from a clogged fuel filter which causes the pump to not build up enough...

When I try to start my car up it will crank but won't start up

There are several possible causes for a vehicle to crank and not start (https://www.yourmechanic.com/services/car-is-not-starting-inspection). There could be a bad fuel pump, faulty plugs, bad timing belt/chain, faulty ignition, failed camshaft/crankshaft sensor, or any number of other possible causes. It would...

My 2004 Mitsubishi Lancer started smoking and ticking and will not go above 20 mph.

Hello. There are a lot of things that can cause this. Most of the time if you have a ticking noise with smoke then you need to check for a misfire. I would usually start by scanning the computer for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com